ATEX HEATING CABLE 7 JOULE SPECIFICATION ELK®-xx xx--BOT PFA-INSULATED HEATING CABLE FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES, THE ATEX COMPONENT LICENCE FOR THIS SERIES TRACE HEATER ACCORDING TO PFA-CU-PFA DESIGN WAS ISSUED BY THE TESTING LABORATORY. CONSTRUCTION OF THE HEATING CABLE 1 Resistance conductor, cf. Table 2 Insulation sleeve: PFA wall thickness: 0.90 mm (-0/+0.05 mm) / (1) 1.0 mm 3 Metal protective braiding Cu: 16 x 5 x 0.15 mm / (2) 16 x 5 x 0.20 mm / (3) 16 x 6 x 0.20 mm 4 Jacket: PFA wall thickness: 0.6 mm (-0/+0.05 mm) / (4) 0.7 mm / (5) 0.8 mm SPECIFICATIONS Resistance at +20°C (cf. Table) Temperature range: -60°C to +260°C Resistance wire Insulation sleeve: PFA wall thickness Test voltage (Ueff): 2.50 kV AC (conductor/braiding) Metal protective braiding Nominal voltage (UO/U): 450/750V Bending radius: 1.08 – 1.71 Ohm/km: 25 mm 2.90 – 8000 Ohm/km: 15 mm Installation temperature: minimum –60C Jacket: PFA wall thickness Mechanical strength: 7 Joule QUALIFICATIONS Certifications ATEX, CE ELTRACE - 12, rue des frères Lumière - F-77290 - Mitry Mory - France - Tel: +33 (0)1 64 62 04 40 - Fax: +33 (0) 1 64 62 00 54 - www.eltrace.com - [email protected] Dans le soucis d’améliorer ses performances, ELTRACE se réserve le droit de modifier les caractéristiques sans notification préalable - 20140602 Cable Chauffant Résistif Reference Ohm/m Temp coefficient Wire Diameter Lead cross electr.resistance 20 and mm section mm² Jacket OD mm 105°C in 10-6/k ELK-0.00108-BOT (1)+(3)+(5) 0.00108 0.404 16.14 10.20 4300 ELK-0.00171-BOT (3)+(4) 0.00171 0.404 10.24 8.60 4300 ELK-0.0029-BOT (2)+(4) 0.0029 0.3 5.93 7.60 4300 ELK-0.004-BOT (2) 0.004 0.3 4.45 6.55 4300 ELK-0.0044-BOT (2) 0.0044 0.3 3.95 6.70 4300 ELK-0.0072-BOT 0.0072 0.25 2.45 5.54 4300 ELK-0.01-BOT 0.01 0.203 1.81 5.35 4300 ELK-0.0117-BOT 0.0117 0.25 1.47 5.20 4300 ELK-0.015-BOT 0.015 0.2 1.16 5.02 4300 ELK-0.0178-BOT 0.0178 0.2 1.00 4.90 4300 ELK-0.025-BOT 0.025 0.423 0.98 4.87 3000 ELK-0.0315-BOT 0.0315 0.53 1.54 5.19 1000 to 1600 ELK-0.05-BOT 0.05 0.423 0.98 4.87 1000 to 1600 ELK-0.05-BOT 0.05 0.289 0.98 4.93 1000 to 1600 ELK-0.065-BOT 0.065 0.37 0.75 4.71 1000 to 1600 ELK-0.08-BOT 0.08 0.335 0.61 4.61 1000 to 1600 ELK-0.1-BOT 0.1 0.52 1.48 5.16 350 to 450 ELK-0.1-BOT 0,1 0.30 0.49 4.50 1000 to 1600 ELK-0.15-BOT 0.15 0.423 0.98 4.87 350 to 450 ELK-0.18-BOT 0.18 0.32 0.56 4.56 500 to 900 ELK-0.2-BOT 0.2 0.366 0.73 4.70 350 to 450 ELK-0.32-BOT 0.32 0.41 0.92 4.83 180 ELK-0.36-BOT 0.36 0.273 0.41 4.42 350 to 450 ELK-0.38-BOT 0.38 0.376 0.77 4.73 approx 180 ELK-0.48-BOT 0.48 0.335 0.62 4.61 approx 180 ELK-0.6-BOT 0.6 0.3 0.49 4.50 approx 180 ELK-0.65-BOT 0.65 0.288 0.46 4.46 approx 180 ELK-0.7-BOT 0.7 0.277 0.42 4.43 approx 180 ELK-0.81-BOT 0.81 0.329 0.59 4.59 -80 to 40 ELK-1-BOT 1.0 0.296 0.48 4.49 -80 to 40 ELK-1.44-BOT 1.44 0.246 0.33 4.34 -80 to 40 ELK-1.75-BOT 1.75 0.2 0.28 4.40 -80 to 40 ELK-1.75-BOT 1.75 0.224 0.28 4.27 -80 to 40 ELK-2-BOT 2.0 0.305 0.51 4.52 300 to 400 ELK-3-BOT 3.0 0.249 0.34 4.35 300 to 400 ELK-8-BOT 8.0 0.155 0.13 4.07 50 to 150 ELK®-xx xx--BOT ELTRACE - 12, rue des frères Lumière - F-77290 - Mitry Mory - France - Tel: +33 (0)1 64 62 04 40 - Fax: +33 (0) 1 64 62 00 54 - www.eltrace.com - [email protected] Dans le soucis d’améliorer ses performances, ELTRACE se réserve le droit de modifier les caractéristiques sans notification préalable - 20140602 Cable Chauffant Résistif
© Copyright 2024 ExpyDoc