load-cell load-cell–pur tpe-e insulated, pur sheated data cables

LOAD-CELL
APPLICATION: These screened flexible control and connecting cables are used in industrial electronics, information and transmission systems.
These are also used in pulling-tensile equipments, electronic balance-scale machines as a Load-Cell cables. These cables are suitable for flexible
and permanent installation in dry rooms. And also consisting of tinned copper wires as screen provides protection against external pulses.
CABLE DESIGN
Conductor
: Flexible copper wires, plain;
IEC 60228 Class 5, TS/DIN EN 60228 Class 5
TECHNICAL DATA
Standard
: Designed acc. to VDE 0812 and VDE 0250
Insulation resistance
: Min. 100 MΩ.km
Insulation
: PVC or polyolefin compound , coloured cores
: 80-120 nF/km
Lay-up
: Cores laid up in layers of short optimum pitch
Mutual Capacitance
(800 Hz)
1.Screen
: Aluminium polyester tape
Operating voltage
: 350 V
2.Screen
: Braid of tinned Cu wires, approx. %65 coverage
Test voltage
: 1200 V
Temperature range
: Fixed: - 40 C ~ + 70 C
o
o
Mobile : - 5 C ~ + 70 C
Min. Bending radius
: Fixed: 6 x D
Mobile : 12 x D
Flame retardance test
: IEC 60332-1 & EN 50265-2-1
Outer Sheath : Flame-retardant special PVC or TPE compound
Outer Colour
: RAL 7032 Grey or RAL 9005, Black
o
o
LOAD-CELL–PUR
TPE-E INSULATED, PUR SHEATED DATA CABLES
APPLICATION: These oil, cold and extreme mechanical loads resistance high-flexibility PUR sheated screened speacial type LOAD-CELL , flexible
control and connecting cables are used in industrial electronics, information and transmission systems. These are also used in pulling-tensile
equipments, electronic balance-scale machines as a Load-Cell cables. These cables are suitable for flexible and permanent installation in dry
rooms. And also consisting of tinned copper wires as screen provides more protection against external pulses.
CABLE DESIGN
Conductor
: Flexible copper wires, plain or tinned
IEC 60228 Class 6, TS/DIN EN 60228 Class 6
TECHNICAL DATA
Standard
Insulation
: TPE-E compound , coloured cores
Insulation resistance
: Min. 100 MΩ.km
Lay-up
: Cores laid up in layers of short optimum pitch
:
1.Screen
: Aluminium polyester tape
Mutual Capacitance
(800 Hz)
2.Screen
: Braid of tinned Cu wires, approx. %85 coverage
Operating voltage
: 350 V
Outer Sheath : Flame-retardant special PVC or TPE compound
Test voltage
: 1500 V
Outer Colour
Temperature range
: Fixed: - 50 C ~ + 90 C
o
o
Mobile: - 30 C ~ + 80 C
Min. Bending radius
: Fixed: 5 x D
Mobile : 7,5 x D
Flame retardance test
: IEC 60332-1 & EN 50265-2-1
: RAL 7032 Grey or RAL 9005, Black
: VDE 0812’e uygun
According to VDE 0812
80-120 nF/km
o
o

Download Report