Swivel Joints SJ200 / 400 series Sizes: from 2” to 6” Loadtec supplies a wide range of steel swivel joints, from 2” to 6”, with different seals, to meet different requirements for petroleum, chemical, industrial, food and many other applications. Standards and regulations • 94/9/EC Directive (ATEX) • 97/23/EC Directive (PED) • API - ASTM - ANSI - TTMA standards Technical features • Single or double ball races • Hardened and rectified races • Double seal • Leakage detection port • Design pressure } 40 bar • Test pressure } 60 bar Typical applications • Hydrocarbon loading arms • Chemical loading arms • Aviation skids • LPG loading arms • Flexible Hoses Loadtec Engineered Systems Ltd, The Stables, Coach House, Hythe Road, Smeeth, Kent, TN25 6SP, UK Tel: +44 (0) 1303 81 3030 Fax: + 44 (0) 1303 81 4040 E-mail: [email protected] www.loadtec.co.uk Swivel Joints Materials and seals • Carbon steel + FKM • Carbon steel + PTFE • Killed carbon steel + PTFE • AISI304 + PTFE • AISI316 + PTFE Operating temperature } } } } } PLUS -26 / +130°C -29 / +130°C -45 / +130°C -60 / +130°C -60 / +130°C 42CrMo4 inductionhardened steel HighER resistance to bending moments Special configuration for extended temperature End connections Other available seals • Butt weld ends sch.40 • BSP thread (male or female) • NPT thread (male or female) • ANSI150/300 flanges • PN16/40 flanges • TTMA flanges • HNBR (Hydrogenated NBR) • FVMQ (Fluorosilicone) • FFKM (Perfluorurated) • FKM-F (Viton GLT) STYLE 20 SJ220 STYLE F20 SJ222 STYLE F30 SJ223 STYLE F40 SJ224 STYLE F50 SJ225 STYLE F60 SJ226 STYLE F70 SJ227 STYLE F10 SJ221 Standard documentation Documentation on request • Declaration of conformity to applicable directives • Final Test report • Owner manual including BOM and spare part list a) b) c) STYLE F80 SJ228 Welding book (WB) including: • Welding Map (WM) • Welding qualifications (PQR) • Welding Procedures (WPS) • Welder Qualification (WQ) • Dye penetrant test on socket welds • X-ray on butt welds Material Identification Map (MIM) including: • 3.1 EN 10204 Certification Complete Quality Control Plan (QCP) including: • Welding book (WB) • Material Identification Map (MIM) • Manufacturing (Delivery) Plan Loadtec Engineered Systems Ltd, The Stables, Coach House, Hythe Road, Smeeth, Kent, TN25 6SP, UK Tel: +44 (0) 1303 81 3030 Fax: + 44 (0) 1303 81 4040 E-mail: [email protected] www.loadtec.co.uk
© Copyright 2024 ExpyDoc
