304 - Stoody Industrial And Welding Supplies, Inc.

<NEXT
NEXT>
<INDEX
Stoody Industrial & Welding Supply, Inc.- San Diego (619) 234-6750/ Victorville (760) 530-0765 WWW.STOODYIND.COM
$
PLASMA CUTTING
FOR PRICE LISTING
GO TO PAGE 317
R e p l a c e m e n t
P a r t s
Accessories Suitable For
Suitable For
Thermal Dynamics Corp.®
SOLAR®
Torch Model
Power Supply Model
Torch Model
Power Supply Model
20-50 (MAX®42)
n/a
PCH-20
(PAK 2XT AND DYNAPAK 110)
T-3433 (T-027)
Nozzle, 40 Amp
T-3430 (T-028)
Nozzle, .038, lo-current
T-804 Torch Switch
T-3390 (T-030)
Electrode, Air
T-1066
Handle
T-3438 (T-029)
Swirl Ring
T-800
T-801
T-802
T-803
PX4454L
Nozzle, Extended
T-3458
O-Ring
T-3706 (T-026)
Retaining Cap
T-806 Pilot
Lead Insulator
Suitable For
Thermal Dynamics Corp.®
REQUIREMENTS:
Gas: Air, Nitrogen
Pressure: 80 psi
Flow: 4,5 scfm
Max. Cutting Thickness: 3/8"
PX4450L
Electrode, Extended
Leads
Old Style, 12.5 ft
Old Style, 25 ft
New Style, 12.5 ft
New Style, 25 ft
Torch Model
Power Supply Model
PCH-25
PAKMASTER® 15AC,
PAKMASTER® 25 and ECONO-PAK™ 25
Packmaster® 15AC
Suitable For
SOLAR®
T-272
Shield Cup
Miscellaneous
T-163
O-Ring Lubricant
Silicon
THIS
ITEM
AVAILABLE
Improves sealing and reduces wear on
rubber O-rings
T-2320
Tip
T-1332
Gas
Distributor
T-1333
Electrode
T-267
Hand Torch 70°
T-269
T-272
T-267
T-1334
T-103
Gas
Shield Cup Tip
Electrode Hand Torch 70°
Distributor
T-273
T-1075
Shield Cup, Crown
Hand Torch 90°
requires T-272
Packmaster® 25 & Econo-pak™ 25
Suitable For
Requirements:
Gas:
Air
Pressure: 50 psi (3.5 BAR)
Flow:
105 scfh (50 Ipm)
for cutting
Torch Model
PCH-10 (Drag Gun and Cougar)
T-272
Shield Cup
T-2307 Tip, Air, 12 Amp
Drag-Gun™
T-269 Gas Distributor
1/4
Thicknes
Thermal Dynamics Corp.®
Inches
3/16
Cutting Speed
for 20 Amp on
Mild Steel
1/8
1/16
20 GA
26 GA
0
T-103
Electrode
T-1334 Tip, Air
Cougar™ 125
T-267
Hand Torch 70°
T-1075
Hand Torch 90°
50
100 150 200
Cutting Speed
250 IPM
Accessories Suitable For
Thermal Dynamics Corp.®
Suitable For
Torch Model
Power Supply Model
PCH-25
PAKMASTER® 25 and ECONO-PAK™ 25
Thermal Dynamics Corp.®
Torch Model
Power Supply Model
PCH-20
(PAK 2XT AND DYNAPAK 110)
T-106 Shield Cup
T-104
Gas Distributor
T-105 Tip
T-122 O-Ring
T-1079
Split Holder,
90° for T-1040
T-1618
Split Holder,
90° for T-1621
T-103 Electrode
T-1619
T-1620
Thickness
Handle w/Switch
Torch Leads, 12.5’
Torch Leads, 25’
Minimum pressure from the compressed
air source to the air regulator is 60 psi
(4.1 BAR). Maximum pressure must not
exceed 100 psi (6.9 BAR)
3/16
1/8
Cutting
Range
Air Supply
Requirements
80
120
1/16
T-102
Hand Torch,
PCH20
ITEMS NOT SHOWN:
PIP Wire Ass´y
T-1081
T-1621
Spring
T-584
70° Torch w/25’ Leads
T-583
70° Torch w/12.5’ Leads
T-586
90° Torch w/25’ Leads
T-585
90° Torch w/12.5’ Leads
T-108 O-Ring
Minute 0
T-1040
20
40
60
100
140
160
“( )” = Alternate Number
Stoody Industrial & Welding Supply, Inc. (SIWS) is not associated with STOODY Company or any of the above manufacturers. SIWS reserves the right to substitute OEM
products in place of parts shown.
304

Download Report