´ÉÉʹÉÇEò |ÉʶÉIÉhÉ dSysaMj
ANNUAL TRAINING CALENDAR
2014-2015
iÉEòxÉÒEòÒ |ÉʶÉIÉhÉ Eäòxpù
®äú±É Êb÷¤¤ÉÉ EòÉ®úJÉÉxÉÉ, Eò{ÉÚ®úlɱÉÉ
TECHNICAL
TECHNICAL TRAINING
TRAINING CENTRE
CENTRE
RAIL
KAPURTHALA
RAIL COACH
COACH FACTOR
FACTORY
Y,, KAPURTHALA
OHSAS
IMS
18001
EMS
ISO:14001
QMS
ISO:9001
MESSAGE FROM CHIEF MECHANICAL ENGINEER… Learning is a continuous process and it is never too late to learn. Technical Training Centre of Rail Coach Factory aptly lives upto it. The Centre has good class rooms and other infrastructure facilities. There is a good Hostel facility for trainees, with mess attached. Sports and other recreational facilities are also available in Training Centre/RCF complex for all‐around development of trainees. We have got dedicated faculty to impart training. The courses are organized on diverse subjects, besides those connected with coach manufacture/ maintenance. Railways are requested to make use of this Facility and nominate staff as per their quota. If there are requirements for special course(s), the same can also be organized. Suggestions for improvement are most welcome. (G.C.Agrawal)
About Us …
Technical Training Centre was established in the year 1987 with a purpose
to enhance the potential of the newly recruited employees and to meet the
immediate training need.
Now a days, Technical Training Centre is not only imparting training to
RCF employees but also sharing the responsibility of “Product based training” to
all zonal railways & production units as per their requirements. Technical
Training Centre is established within RCF campus itself in its natural, lush green
and peaceful environment.
Infrastructure …
For effective training, there are well equipped shops and labs like Fitting
Shop, Machine Shop, Welding Shop, Paint Shop, Carpentry Shop, Electrical lab,
Refrigeration & Air Conditioning lab, Coach Component lab, Automation Lab,
Electronics lab and Weld Test Lab. All labs are duly furnished with related models
and working models like - A working model of “Railway Braking and fault trainer”
,“Controlled Discharge Toilet System and Water Circulation System” of (LHB) /
Stainless steel coaches in Coach component Lab & “Electro-pneumatic trainer kit
with PLC” in Automation lab has been installed for practical demonstration to the
trainees.
Sufficient Computers are available in Computer lab for the trainees. TTC
has one LHB Model room, where major and important component have been
displayed.
There are acoustically well furnished air conditioned class rooms with
LCD Projectors. TTC has an auditorium having seating capacity for 250 persons.
It is used for seminars & extra curricular activities.
Training Methodology …
Modern training aids like LCD Projectors, Computers, working models,
various variant of coach components/ assemblies and mockups of various
variants of coaches are available in TTC.
Besides class room training, On site training is also imparted at shop
floor. Learning behavior is adjudged at the time of induction and all efforts are
made to fulfill the learning requirements of the trainees.
Performance of each trainee is evaluated at the end of the programme.
Library …
There is a well furnished library having more than 4800 books on various
subjects like Technical, Management, Culture, Religion, Medical, Yoga, literature
and Applied trades. Regular news papers like The Indian Express, The Tribune,
Punjab Kesri, HT etc and magazines like-India Today, Sports-star, Pratiyogita
Darpan, Competition Success Review and Electronics for you (EFU) etc. are
always available for enhancement of knowledge of the trainees.
Location of Technical Training Centre...
Rail Coach Factory (Kapurthala) is located on Jalandhar City-Ferozepur Railway
Section. It is approachable from two rail heads in Jalandhar Area- Jalandhar City &
Jalandhar cantt. It is 27 kms from Jalandhar City & 32 Kms from Jalandhar Cantt.
Jalandhar City (or Jalandhar Cantt.) is well connected from New Delhi by
Mail/Express/Shatabdi Trains. The journey time is 6 to 8 hours approximately. To reach
RCF by trains from Jalandhar City or jalandhar Cantt. A number of trains (DMU and
Mail/Express) are available throughout the day. RCF is served by two rail heads, namely
RCF Halt and Hussainpur.Nearest railway station to TTC is Hussainpur. So to reach TTC
by train, detrain at Hussainpur. TTC is at walking distance from the non-platform end
side of Hussainpur railway station (Distance=1.7Kms).
To reach RCF by Bus-Buses are available throughout the day from Jalandhar City
bus stand to Kapurthala Town (from Jalandhar cantt. one has to reach Jalandhar City bus
stand and then to move to Kapurthala Town). From Kapurthala, there are plenty of
buses & autorikshaws are available to gate no-2 (Halt gate). Cycle/Autorikshaws are
available at gate no-2 upto TTC Hostel (Distance 4 Kms). TTC hostel is adjoining to TTC.
A WAY TO TECHNICAL TRAINING CENTRE
TTC hostel and Recreational services…
Adequate accommodation is available for boarding and lodging to participants
reporting from different railways for various courses. Only non- family accommodation is
available. Mess is being organized by the trainees on co-operative basis.
In the Recreation room, Dish TV, Magazines and news papers are available for
the trainees. Indoor and outdoor sports facility and multi gymnasium are also available.
TTC ORGANISATION CHART
CME
CPM
DY. CME PROJECT
AWM TRAINING
HOSTEL SUPDT.
CHIEF
INSTRUCTORS
JR. INSTRUCTORS
DEMONSTRATORS
CHIEF OFFICE SUPDT.
TTC FACULTY MEMBERS AND THEIR CONTACTS…
NAME
(S/Sh.)
CORD.
CODE
R.P. Sharma
RPS
Dy. CME-Project
93910, 01822-227730
9779241444
Narender Oberoi
NK
AWM-TRG
93004, 01822-228782
9779241451
S.S.Kanwar
SSK
CI-Coordination
93069
7589420430
R.K.Sharma
RKS
CI-Furn.
93064
8968272640
Balkar Singh
BS
CI- RWTI
93082
7589421326
R.C.Nasa
RCN
CI-Welding
93083
8968700622
R.K.Khanna
RKK
CI-Manufacturing
93068
9530935029
G.P.Singh
GPS
CI-Electrical
93087
8437041323
S.K.Gulati
SKG
CI-Fitting Shop
93084
9417911859
Dharamjit Singh
DJS
CI-Store
93065
9888017877
RS
93086
9041129761
93088
8427321619
DESIGN
PHONE
RAILWAY/BSNL
MOBILE
Vivek Kishore
VK
CI-Electronics &
Automation Lab
JI- Computer Lab
Baldev Raj Sharma
BRS
JI-Store
93065
8437064888
Amit Kumar
AK
JI- CDTS Lab
93088
9855228437
Manoj Sharma
MS
JI - Welding
93083
9417683616
Vinay Pratap Singh
VPS
JI- Automation
93086
7589056402
Parminder Singh
PS
Ch. OS-Hostel
93036
8437041805
Smt. Elizabeth
Tirkey
ET
Ch. OS- I
93047
8437043326
Shanker Lal
SL
Ch. OS- II
93038
9041045189
Amrik Singh
AK
Hostel Warden
93062
9855663347
Balwinder Singh
BS
Lib. & Information
Asstt.
93081
9417357915
Rameshwar Singh
RCF Console
-------
Centralized
FAX/RCF
-------
01822-227734, 227735
227736,227737,227738
92682(Rly), 01822227733, 228980
-----------
FAX
Dy. CME – Project
01822-227730
------
FAX
AWM-Training
01822-228782
------
TRAIN SCHEDULE
JALANDHAR CITY TO RCF, FEROZEPUR & BACK
TRAINS MOVING TOWARDS
RCF,JALANDHAR
TRAINS MOVING TOWARDS
RCF, FEROZEPUR
TRAIN NO.
74932
FZR
03:10
RCF
05:02
JUC
06:00
TRAIN NO.
74934
54644
19223*
74926
74936
74938
74940
19225*
05:00
06:25
10:20
11:15
13:20
15:10
17:30
20:45
07:35
08:44
12:05
13:14
15:43
17:20
19:42
22:22
08:40
09:55
12:45
14:30
16:35
18:20
20:30
23:10
19226*
JUC
03:50
RCF
04:19
FZR
07:05
74931
74933
74925
74935
19224*
54643
74937
74939
05:05
06:45
07:40
09:00
13:25
14:50
17:25
20:45
05:50
07:21
08:26
09:36
14:00
15:25
18:02
21:22
08:20
09:45
11:05
12:35
16:00
18:15
20:20
23:45
* TRAINS STOP AT RCF HALT, NOT AT HUSSAINPUR STATION.
LIST OF GAZETTED HOLIDAYS FOR THE YEAR - 2014
S. NO.
HOLIDAYS
DATE
DAY OF WEEK
1
REPUBLIC DAY
26.01.14
SUNDAY
2
GURU RAVI DASS BIRTHDAY
14.02.14
FRIDAY
3
SHIVRATRI
27.02.14
THURSDAY
4
HOLI
17.03.14
MONDAY
5
GURU ARJUN DEV’S MARTYRDOM
16.06.14
MONDAY
6
ID-UL FITR
29.07.14
TUESDAY
7
INDEPENDENCE DAY
15.08.14
FRIDAY
8
GURU GRANTH SAHIB PRAKASH PARV
01.09.14
MONDAY
9
MAHATAMA GANDHI’S BIRTHDAY
02.10.14
THURSDAY
10
DUSSEHRA
03.10.14
FRIDAY
11
MAHARISHI VALMIKI’S JAYANTI
08.10.14
WEDNESDAY
12
DIWALI
23.10.14
THURSDAY
13
GOVARDHAN PUJA
24.10.14
FRIDAY
14
GURU NANAK DEV’S JAYANTI
06.11.14
THURSDAY
15
CHRISTMAS DAY
25.12.14
THURSDAY
RCF, KAPURTHALA
ABOUT REGIONAL WELDING TRAINING INSTITUTE
Regional Welding Training Institute was Established in Dec. 2002 in Rail Coach
Factory with a view to enhance welding skills of Supervisors and Technicians of RCF, DMW,
Northern Railway and North Western Railway.
RWTI has well equipped, modernized welding shop and test lab and peaceful
environment for learning, environment friendly class rooms.
WELDING SHOP
Welding shop has latest infrastructure having sufficient number of MMAW and
MIG/MAG, Digital-Pulse type MIG/MAG, Inverter Based TIG Welding , Submerged Arc Welding
with Gouging Facility, Spot Welding machine.
Besides above, Welding Fume Extraction System has been provided to take care of
the health of Trainees .
WELD TEST LAB
RWTI has a new weld test lab to enhance the awareness about welding quality by
various testing methods.
Lab is equipped with Universal Testing Machine, Rockwell Hardness Testing
Machine, Impact Testing Machine, Heating Furnace, Magna-flux Testing Machine, Inverted
Metallurgical Microscope and Micro- polisher.
COMPARATIVE CHART OF TRAINING DAYS
10000
9000
NUMBER OF TRAINING DAYS
8000
7000
2009-2010
2010-2011
2011-2012
2012-2013
2013-2014
6000
5000
4000
3000
2000
1000
0
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
JAN
FEB
MAR
2009-2010
5086
4769
5904
7018
6711.5
4124.5
9321.5
7870.5
6609.5
4898
4675.5
5497.5
2010-2011
5752
3966
4155
4994
3758.5
4262.0
3346.0
3065
3373
3071
4168
4215
2011-2012
6209
5992
5839.5
5831
6101
6831
3733.5
2298
2728
1640
2014.5
1860
2012-2013
1902.5
1312
2048
1934.5
3006.5
4665.5
3097
3016
3488.5
4332.5
4097.5
3325
2013-2014
5355
4810.5
3613.5
4880
4799.5
5292
3124.5
3502.5
3399
MONTHS
TRAINING CALENDAR
S.N. COURSE TITLE
COURSE
CODE/
DURATION
COURSE COORDINATOR
FOR THE YEAR 2014-15
FREQ.
SCHEDULED DATES
LHB COURSES
1
KD-48
LHB COACH TRAINING (MECHANICAL) FOR
02 WEEKS
SUPERVISORS
RKS
3
07.04.14
19.04.14
21.07.14
02.08.14
2
LHB COACH TRAINING (MECHANICAL) FOR KD-50
02 WEEKS
TECHNICIANS
RKS
3
26.05.14
07.06.14
25.08.14
06.09.14
3
KD-49
LHB COACH TRAINING (ELECTRICAL) FOR
02 WEEKS
SUPERVISORS
GPS
3
21.04.14
03.05.14
04.08.14
16.08.14
01.12.14
13.12.14
4
KD-51
LHB COACH TRAINING (ELECTRICAL) FOR
02 WEEKS
TECHNICIANS
GPS
3
12.05.14
24.05.14
22.09.14
04.10.14
03.11.14
15.11.14
5
LHB COACH TRAINING FOR TRAINERS
KD-52
01 WEEK
RKS
2
05.05.14
10.05.14
6
STAINLESS STEEL & TIG WELDING FOR
SUPERVISORS
BH-21
01 WEEK
RCN
3
09.06.14
14.06.14
7
STAINLESS STEEL & TIG WELDING FOR
TECHNICIANS
BH-20
02 WEEKS
RCN
4
19.05.14
31.05.14
8
INSTALLATION, OPERATION &
MAINTENANCE OF RMPU & INVERTER
KE-35
01 WEEK
GPS
9
AIR & DISC BRAKE SYSTEM OF RAILWAY
COACHES
KE-38
02 WEEKS
10
PAINTING & FURNISHING OF RAILWAY
COACHES
BH-19
02 WEEKS
17.11.14
29.11.14
23.02.15
07.03.15
23.03.15
28.03.15
18.08.14
23.08.14
27.10.14
01.11.14
07.07.14
19.07.14
08.09.14
20.09.14
15.12.14
27.12.14
3
09.06.14
14.06.14
06.10.14
11.10.14
RKS
3
23.06.14
05.07.14
RS
3
05.05.14
17.05.14
07.07.14
19.07.14
16.02.15
21.02.15
02.02.15
14.02.15
09.03.15
21.03.15
08.09.14
20.09.14
REFRESHER COURSES
1
2
REFERESHER COURSE FOR TECHNICIAN
FURNISHING/FRPMOULDER/PAINTER/TRIM
MER
REFERESHER COURSE FOR TECHINICIAN
(MACHINIST TRADE) FOR MW/TR/M/C
SHOP/SMS
BR-01
01 WEEK
RS
3
21.04.14
26.04.14
BR-02
01 WEEK
RKK
3
28.04.14
03.05.14
11.08.14
16.08.14
23.06.14
28.06.14
3
REFERESHER COURSE FOR TECHNICIAN
ELECTRICAL
BE-01
01 WEEK
SSK
3
21.07.14
26.07.14
4
REFERESHER COURSE FOR TECHNICIAN
FITTER/SHELL
BR-08
01 WEEK
RCN
3
02.06.14
07.06.14
5
REFERESHER COURSE FOR FITTER/
WELDER (CIVIL DEPARTMENT)
BC-02
01 WEEK
RCN
1
23.06.14
28.06.14
6
REFERESHER COURSE FOR MINISTERIAL
STAFF OF ALL DEPTTS.
JX-02
01 WEEK
SKG
4
12.05.14
17.05.14
7
SUPERVISORS DEVELOPMENT
PROGRAMME
LM-01
01 WEEK
DJS
6
07.04.14
12.04.14
8
REFERESHER COURSE FOR FAILED
WELDERS
BH-18
01 WEEK
RCN
9
DEVELOPMENT PROGRAMME FOR GROUP AL-01
'D' STAFF
03 DAYS
10
REFERESHER COURSE (PURCHASE) FOR
CLERICAL & SUPERVISOR STAFF OF
STORES DEPTT.
11
REFERESHER COURSE (DEPOT) FOR
CLERICAL & SUPERVISOR STAFF OF
STORES DEPTT.
17.11.14
22.11.14
04.08.14
09.08.14
13.10.14
18.10.14
22.09.14
27.09.14
23.02.15
28.02.15
06.10.14
11.10.14
17.11.14
22.11.14
14.07.14
19.07.14
08.09.14
13.09.14
3
15.09.14
20.09.14
06.10.14
11.10.14
RS
3
24.09.14
26.09.14
ST-04
01 WEEK
DJS
4
21.04.14
26.04.14
09.06.14
14.06.14
04.08.14
09.08.14
ST-08
01 WEEK
DJS
4
05.05.14
10.05.14
07.07.14
12.07.14
15.09.14
20.09.14
12.05.14
17.05.14
09.02.15
14.02.15
16.02.15
21.02.15
03.11.14
08.11.14
12.01.15
17.01.15
02.03.15
07.03.15
02.02.15
04.02.15
06.10.14
11.10.14
09.02.15
14.02.15
24.03.15
26.03.15
TRAINING CALENDAR
S.N. COURSE TITLE
FOR THE YEAR 2014-15
COURSE
CODE/
DURATION
COURSE COORDINATOR
FREQ.
SCHEDULED DATES
RWTI COURSES
1
BASIC WELDING TRAINING FOR
BEGINNERS
M- I
04 WEEKS
BS
2
07.04.14
03.05.14
2
REFRESHER COURSE FOR WELDING
TECHNICIANS
M-II
02 WEEKS
BS
6
09.06.14
21.06.14
28.07.14
09.08.14
3
REFRESHER COURSE FOR WELDING
SUPERVISORS
M- IV
02 WEEKS
BS
3
05.05.14
17.05.14
07.07.14
19.07.14
09.02.15
07.03.15
15.09.14
27.09.14
08.12.14
20.12.14
19.01.15
31.01.15
16.03.15
28.03.15
27.10.14
08.11.14
SAFETY COURSES
1
FACTORY ACT, INDUSTRIAL SAFETY & LT-03
MATERIAL HANDLING SAFETY
03 DAYS
RKK
4
07.05.14
09.05.14
04.06.14
06.06.14
16.07.14
18.07.14
2
DISASTER MANAGEMENT
KT-22
01 WEEK
SKG
4
07.04.14
12.04.14
23.06.14
28.06.14
15.09.14
20.09.14
3
REFRESHER COURSE FOR SHUNTING
STAFF
BY-01
02 DAYS
RKK
3
10.04.14
11.04.14
24.07.14
25.07.14
28.08.14
29.08.14
03.09.14
05.09.14
08.12.14
13.12.14
SPECIAL COURSE
1
TRAINING FOR SUPERVISORS &
WORKERS OF CONTRACTORS
KT-36
HALF DAY
2ND HALF OF EVERY WORKING MONDAY ( FOR RCF ONLY)
RKK
COMPUTER COURSES
1
BASIC COMPUTER COURSE
KF-10
01 WEEK
RS
6
2
ADVANCE COMPUTER COURSE
KF-12
01 WEEK
GPS
3
14.04.14
19.04.14
21.07.14
26.07.14
13.10.14
18.10.14
24.11.14
29.11.14
29.12.14
03.01.15
16.03.15
21.03.15
22.12.14
27.12.14
19.01.15
24.01.15
02.03.15
07.03.15
28.07.14
02.08.14
25.08.14
30.08.14
13.10.14
18.10.14
06.10.14
11.10.14
17.11.14
22.11.14
22.12.14
27.12.14
12.01.15
17.01.15
OTHER COURSES
1
INDUSTRIAL APPLICATION OF
KJ-23
HYDRAULICS & ELECTRO-PNEUMATICS 01 WEEK
RS
4
2
PROGRAMMING & OPERATION OF CNC KG-34
MACHINES
01 WEEK
RKK
4
3
IMS, 5-S, EMS POLICY & LEGISLATION
KI-21
03 DAYS
RKK
6
15.04.14
17.04.14
13.05.14
15.05.14
09.07.14
11.07.14
19.08.14
21.08.14
06.01.15
08.01.15
24.03.15
26.03.15
4
INTRODUCTION TO DISCIPLINE &
APPEAL RULES
KR-01
03 DAYS
SSK
6
09.04.14
11.04.14
21.05.14
23.05.14
06.08.14
08.08.14
27.08.14
29.08.14
03.12.14
05.12.14
04.02.15
06.02.15
5
USE OF POWER/SMALL TOOLS
BJ-01
02 DAYS
RKK
3
14.10.14
15.10.14
06.01.15
07.01.15
10.03.15
11.03.15
6
EOT CRANE/TRAVERSER OPERATION
BV-01
01 WEEK
RKK
3
08.12.14
13.12.14
02.02.15
07.02.15
7
FORK LIFTER TRUCK OPERATION
RKK
3
RS
3
06.05.14
08.05.14
24.06.14
26.06.14
02.12.14
04.12.14
BS
3
21.04.14
26.04.14
02.06.14
07.06.14
16.02.15
21.02.15
8
9
BV-02
01 WEEK
KJ-36
PLANT OPERATION AND MAINTENANCE
03 DAYS
DESIGN AND DRAWING APPRECIATION
KD-56
01 WEEK
09.06.14
14.06.14
02.06.14
07.06.14
08.09.14
13.09.14
27.10.14
01.11.14
23.03.15
28.03.15
COURSE
CONTENTS
LHB COURSES
01. LHB COACH TRAINING (MECHANICAL) FOR SUPERVISORS (KD-48)…
SALIENT FEATURES OF LHB COACH (MECH.), SALIENT FEATURES OF LHB COACH (ELECT.), , RMPU,
WHEEL SET EARTHING EQUIPMENTS, SWITCH BOARD CABINET, POWER SUPPLY, BOGIE - AIR SPRING
DESIGN AND TESTING, FIAT BOGIE, ROLLER BEARING & WHEEL ASSEMBLY, SLIDING DOORS, BODY
SIDE DOOR, LAVATORY DOOR, OPERATION, BATTERY AND BATTERY CHARGER, IMS, CONTROLLED
DISCHARGE TOILET SYSTEM, PRINCIPLE CHARACTERISTICS OF BRAKE CONTROL EQUIPMENTS & ITS
FUNCTIONS, DISC BRAKE SYSTEM & WHEEL SLIDE PROTECTION,BASIC ELECTRICITY, WATER
CIRCULATIONS SYSTEM, SHELL DESIGN, ALARM OPERATING & EMERGENCY WINDOW ARRANGEMENT,
LHB PAINTING SYSTEM, CONSTRUCTION, ASSEMBLY & TESTING OF AIR SPRING BOGIE, LHB COUPLER,
LHB MODEL ROOM & CDTS MODEL ROOM.
02. LHB COACH TRAINING (MECHANICAL) FOR TECHNICIANS (KD-50) …
SALIENT FEATURES OF LHB COACH (ELECT.), SALIENT FEATURES OF LHB COACH (MECH.), SHELL
DESIGN, ALARM OPERATING & EMERGENCY WINDOW ARRANGEMENT, SALIENT FEATURES OF LHB
COACH (MECH.), , DISC BRAKE SYSTEM & WHEEL SLIDE PROTECTION BATTERY AND BATTERY
CHARGER, PRINCIPLE CHARACTERISTICS OF BRAKE CONTROL EQUIPMENTS & ITS FUNCTIONS, RMPU,
WHEEL SET EARTHING EQUIPMENTS, SWITCH BOARD CABINET, POWER SUPPLY,CONTROLLED
DISCHARGE TOILET SYSTEM, IMS, LHB PAINTING SYSTEM, WATER CIRCULATION SYSTEM, SHELL
DESIGN, ALARM OPERATING & EMERGENCY WINDOW ARRAGEMENT, BASIC ELECTRICITY, BOGIE - AIR
SPRING DESIGN AND TESTING.
03. LHB COACH TRAINING (ELECTRICAL) FOR SUPERVISOR (KD-49)…
INTRODUCTION TO COACH PRODUCTION ELECT., INTRODUCTION TO LHB COACH VARIANTS
ELECTRICAL, SALIENT FEATURES OF LHB COACH (ELECT & MECHANICAL), DISTRIBUTION AND
MANAGEMENT OF POWER SUPPLIES CIRCUITS (SBC),
BASICS OF AC & REFRIGERATION , SALIENT
FEATURES OF RMPU (LHB & CONV.), ROOF MOUNTED AC PACKAGE UNIT (LHB), POWER & CONTROL
CKT OF RMPU, WORKING OF AC UNITS FROM PANEL AND SBC, PRACTICAL
OF MOTORS, DOL
STARTER ON PRACTICAL BOARD, CDTS SYSTEM, TESTING OF LHB COACH & TROUBLE SHOOTING,
PROBLEM SOLVING SESSION-LHB, POWER CAR OPERATION AND GENERAL MAINTENANCE, DISC BRAKE
& WSP SYSTEM, WHEEL SET EARTHING, AND VIPASSANA MEDITATION & MAINT. FREE BATTERIES,
WATER CIRCULATION SYSTEMS, SWITCH BOARD CABINET LHB, EQUIPMENTS & FUSE RATING OF LHB
COACHES, IMS, PACIL SYSTEM, SHOP FLOOR VISITS FOR CONCERENED TOPICS, WRITTEN TEST.
04. LHB COACH TRAINING (ELECTRICAL) FOR TECHNICIAN (KD-51)…
INTRODUCTION TO LHB COMPONENTS, SALIENT FEATURES OF LHB COACH (MECH.), SALIENT
FEATURES OF LHB COACH (ELECT.), , SALIENT FEATURES RMPU, BASIC ELECTRICITY,
DISTRIBUTION OF SUPPLIES CIRCUIT/LIGHTING, TESTING OF LHB COACHES, IMS, PRACTICAL OF
OPERATION ON PRACTICAL BOARDS, BASICS OF AIR CONDITIONING & REFRIGERATION ,
BATTERY CHARGERS, DISK BRAKE & WSP SYSTEMS, SWITCH BOARD CABINET LHB, TESTING OF
LHB COACHES, CDTS SYSTEM, PRACTICAL OF OPERATION ON PRACTICAL BOARD, TESTING OF
LHB COACHES, WATER CIRCULATION (ELECT. & MECH.) SYSTEM, SWITCH BOARD CABINET LHB,
POWER CONTROL CIRCUIT OF RMPU, WHEEL SET EARTHING, BATTERIES CONVENTIONAL &
MAINTENANCE FREE BATTERIES, PACIL SYSTEM.
05. LHB COACH TRAINING FOR TRAINERS (KD-52)…
SALIENT FEATURES OF LHB COACH(MECH.), SALIENT FEATURES OF LHB COACH (ELECT.),
LHB COUPLER, DISC BRAKE SYSTEM & WHEEL SLIDE PROTECTION SYSTEM , SHELL DESIGN,
ALARM OPERATING & EMERGENCY WINDOW ARRANGEMENT, PRINCIPLE CHARACTERISTICS OF
BRAKE CONTROL EQUIPMENTS & ITS FUNCTIONS, BOGIE - AIR SPRING DESIGN AND TESTING,
FIAT BOGIE, ROLLER BEARING & WHEEL ASSEMBLY, CONSTRUCTION, ASSEMBLY & TESTING OF
AIR SPRING BOGIE, LHB PAINTING SYSTEM & FRP LAMINATES & OTHER FURNISHING MATERIAL,
CONTROLLED DISCHARGE TOILET SYSTEM, BIO-TOILET SYSTEM, SLIDING DOOR, WATER
CIRCULATION SYSTEM.
06. STAINLESS STEEL & TIG WELDING FOR SUPERVISORS (BH-21)…
WELDING TERMINOLOGY, INTRODUCTION TO WELDING MACHINES, TIG, , PRACTICALS TIG &
MIG/MAG, VIDEO FILM OF B.E.M.L, STAINLESS STEEL WELDING INTRODUCTION, IMS, CARE IN
HANDLING OF S.S, WELDING DEFECTS, CAUSES AND REMEDY, PRACTICAL- TIG & MIG/MAG, WRITTEN
TEST.
07. STAINLESS STEEL & TIG WELDING FOR TECHNICIANS (BH-20)…
WELDING TERMINOLOGY, ,INTRODUCTION TO VIPASSANA, PRACTICAL-TIG & MIG/MAG, HEALTH &
NUTRITION, IMS, INTRODUCTION TO STAINLESS STEEL WELDING,FILLER METALS & NON
CONSUMABLES, VARIOUS WELDING PROCESS FOR SS,GASES USED IN TIG & SS WELDING,
PARAMETERS FOR QUALITY WELDING, ADVANTAGE OF TIG WELDING , WELDING DEFECTS, CAUSES
AND REMEDIES, WELDING SAFETY, TESTING & CERTIFICATION.
08. INSTALLATION OPERATION & MAINTENANCE OF RMPU & INVERTER (KE35)…
ELECTRICAL COACH PRODUCTION LAY OUT, FEATURES OF LHB COACH, , SALIENT FEATURES OF
CONV. AC RMPU V/S UNDER SLUNG AC UNIT, BASICS OF REFRIGERATION & AC, CONV. & MAINT. FREE
BATTERIES, TESTING OF AC COACHES (ACPUs), MOTOR STARTERS ON PRACTICAL BOARDS,
TECHNICAL SPECIFICATION OF RMPU (Conv. & LHB), POWER & CONTROL CIRCUIT WIRING OF ACP
UNIT (CONV./LHB), POWER DISTRIBUTION ARRANGEMENT IN AC COACHES (CONV./LHB), EXPOSURE
TO GENERATION TEST ON S.G. COACHES, CONTROL & POWER CIRCUIT OF 25 KVA INVERTER, LHB
MODEL ROOM & SHOP VISITS.
09. AIR & DISC BRAKE SYSTEM OF RAILWAY COACHES (KE-38)…
FUNDAMENTALS OF AIR BRAKE SYSTEM. AIR BRAKE & ITS PARAMETERS. AIR BRAKE
SYSTEM DETAILS (ICF TYPE). , AIR BRAKE CHARGING, APPLICATION & RELEASE OF BRAKE
SYSTEM, MODEL ROOM VISIT ON DISC BRAKE SYSTEM, PRINCIPLE & DETAILS OF WHEEL SLIDE
PROTECTION, IMS, TESTING OF AIR BRAKE SYSTEM,
PASSENGER ALARM SYSTEM INTRODUCTION OF PASSENGER ALARM COACH, ITS WORKING (ELECT.), ITS USES AND NEEDS,
PRACTICALS ON SIMULATOR, BOGIE- AIR SPRING DESIGN AND TESTING, BOGIE MOUNTED
BRAKE CYLINDER & FIAT BOGIE, FIAT BOGIE -SALIENT FEATURE AND ITS WORKING PRINCIPLE,
AIR BRAKE SYSTEM TESTING AT RIG., DISC BRAKE SYSTEM - DESIGN ASPECTS &
DEVELOPMENTS, INTRODUCTION OF PASSENGER ALARM COACH ITS WORKING PRINCIPLE,
BOGIE - CONSTRUCTION, ASSEMBLY & TESTING OF AIR SPRING BOGIE, DETAILED ANALYSIS OF
MAJOR PARTS OF AIR BRAKE SYSTEM, DISC BRAKE SYSTEM, WSP AND PHONIC WHEEL
MOUNTING, STUDY OF LHB & CDTS, AND AIR BRAKE SIMULATOR AT TTC, HEALTH & NUTRITION.
FIRE FIGHTING.
10. PAINTING AND FURNISHING OF RAILWAY COACHES (BH-19)
TYPES OF PAINTS, PU PAINT & PU ALUMINIUM PAINT, , ELECTRICAL FITTINGS IN A COACH,
PAINTING PROCESSES OF COACH (INTERIOR & EXTERIOR), HEALTH–NUTRITION & FAMILY
WELFARE, FRP, SCOPE & ITS USE IN COACH, FRP COMPONENTS FITTED IN COACHES, IMS,
COACH CORROSION, CAUSES & REMEDIAL MEASURES, FIRE FIGHTING , STORAGE OF PAINT &
SAFETY PRECAUTIONS, PAINTING DEFECTS ITS REMEDIAL MEASURES , STAGES OF FURNISHING
OF COACH. PVC, PANELLING, WINDOW & CEILING, SEAT & BERTH, LOWERING, AIR BRAKE
SYSTEM, PAINTING INSPECTION & INSTRUMENTS USED.
REFRESHER COURSES
01. REFRESHER COURSE FOR TECHNICIAN FURN./FRP/MOULDER /PAINTER/
TRIMMER (BR-01)…
TRADE THEORY OF FURNISHING, FRP, MOULDER, PAINTER, TRIMMER, , GENERAL METROLOGY,
INDUSTRIAL
SAFETY
AWARENESS,
INCENTIVE
SCHEME,
FIRE
FIGHTING,
ELEMENTARY
ENGG.DRAWING, INDIAN FACTORY ACT-1948, IMS, TRADE PRACTICAL OF FURNISHING, FRP,
MOULDER, PAINTER,TRIMMER. FIRST AID, INTRODUCTION TO COMPUTER, WORKING OF A/Cs
DEPARTMENT, RAILWAY SYSTEM, INTRODUCTION ABOUT D&AR, PASS RULES, LEAVE RULES.
02. REFRESHER COURSE FOR (MACHINIST TRADE) FOR MW/TR/M/C
SHOP/SMS (BR-02)…
RAILWAY SYSTEM, GENERAL METROLOGY, , MFG. PROCESS, CONVENTIONAL & MODERN MFG.
PROCESSES & M/Cs, IMPORTANCE OF TOOL ROOM, PRECISION INSTRUMENTS USED, HEAT
TREATMENT, MFG. PROCESS, CNC & NON-CNC MACHINE MAINTENANCE, USE OF SMALL POWER TOOLS
, IMS, INTRODUCTION TO VIPASSNA MEDITATION, PROGRAMMING OF CNC M/Cs
03. REFRESHER COURSE FOR TECHNICIAN ELECTRICAL (BE-01)…
ELECTRICAL SYMBOLS, CONCEPT OF BASIC ELECTRICITY, D.O.L. STARTER PRACTICAL ON BOARD, ,
MAINTENANCE OF MRS
(SITE), SUB STATION NO1 VISIT FOR MAINTENANCE OF AC PLANT,
INTRODUCTION ABOUT D & AR, LEAD ACID & MAINT. FREE BATTERIES, INITIAL/FINAL CHARGING OF
BATTERIES IN TL SHOP & THEIR MAINTAINENCE, MAINTENACE OF RESIDENTIAL WIRING AND
CIRCUITS., FINAL TESTING & RECTIFICATION OF AC & NON AC COACHES, SHOP VISIT FOR AIR
DELIVERY & PRE COOLING/PULL DOWN TEST OF AC COACHES, FIRE FIGHTING & FIRST AID.
04. REFRESHER COURSE FOR TECHNICIAN/ FITTER /SHELL (BR-08)…
DRILLING PROCESS, FITTER TRADE THEORY, , WELDING PRACTICAL, ELEMENTRY ENGG.
DRAWING, FIRE FIGHTING, JIG & FIXTURE, GENERAL METROLOGY, IMS, JIG & FIXTURE (DESIGN),
METAL ARC WELDING TOOL & EQUIPMENT, WORKING OF A/Cs DEPARTMENT.
05. REFRESHER COURSE FOR FITTER/WEDER/BLACKSMITH (BC-02)…
ELEMENTARY ENGINEERING DRAWING, WELDING TRADE THEORY, YOG VIGIAN, IMS
06. REFRESHER COURSE FOR MINISTERIAL STAFF OF ALL DEPARTMENTS (JX02)…
INDIAN RAILWAY ORGANISATION, INTRODUCTION TO COMPUTER, CONDUCT RULES, ,
IMPREST & ITS RESPONSIBILITY, INTRODUCTION TO D & AR, RTI, IMS, PRACTICAL TRAINING IN
COMPUTER LAB, RIGHTS OF DISABLES, HUMAN RELATIONS, RAILWAY BUDGET, PASS, PTO &
LEAVE RULES. POSITIVE ATTITUDE, FIRST-AID, OFFICE PROCEDURE, NOTING, DRAFTING & PP
WRITING
07. SUPERVISORS DEVELOPMENT PROGRAMME (LM-01) …
CONDUCT RULES, INDIAN RAILWAY SYSTEM, CONTRACT MANAGEMENT, , USE OF COMPUTERS,
IMS, RTI, RIGHTS OF DISABLES, VIGILANCE, PENALTIES AND APPEALS UNDER D&AR, ROLE OF
SUPERVISORS, POSITIVE THINKING, INTEGRATED LIFE MANAGEMENT.
08. REFRESHER COURSE FOR FAILED WELDERS (BH-18) …
IMPORTANCE OF A GOOD WELDER, MORAL RESPONSIBILITY, WELDING SAFETY, DO’s &
DON’Ts OF WELDING PROCESS, PRACTICALS -ARC WELDING AND MIG-MAG WELDING, KEY
POINTS TO GET QUALITY WELDING, WELDING DEFECTS, CAUSES & REMEDY, TESTING &
CERTIFICATION .
09. DEVELOPMENT PROGRAMS FOR GROUP-D STAFF (AL-01) …
INTRODUCTION TO COMPUTER, INDUSTRIAL SAFETY, ETIQUETTES & MANNERS, LOYALITY TO
ORGANIZATION, MISUSE OF PASS/PTOS, DEALING WITH OTHER DEPARTMENTS, BEHAVIOUR WITH
SUPERVISORS, JOB ENRICHMENT, OFFICE AUTOMATION, RIGHTS OF DISABLES, CONDUCT RULE, IMS.
10. REFRESHER COURSE FOR CLERICAL & SUPERVISOR STAFF OF STORES
DEPTT (PURCHASE & STORES A/CS) (ST-04)…
ORGANIZATION OF STORES DEPARTMENT AT VARIOUS LEVELS, FUNCTIONS OF STORES DEPTT.
,SET UP OF MAJOR STORES DEPOT, PURPOSE OF CODIFICATION, VARIOUS CODES, AND THEIR USESUNIT CODE , DEPOT CODE, , CONSIGNEE CODE, PL CODE, SOURCES OF SUPPLY, VARIOUS AGENCIES
FOR PROCUREMENT OF STORES, PURCHASE THROUGH CENTRAL PURCHASE AGENCIES, PROCUREMENT
THROUGH RAILWAY BOARD, SOURCES OF RECEIPT OF MATERIALS IN DEPOT, YOGA, D&AR,
MAXIMUM, MINIMUM, AVERAGE, ANNUAL CONSUMPTION, BUFFER STOCK, DIFFERENCE BETWEEN
ANNUAL ESTIMATE METHOD MAX. AND MIN. ,OTHER METHOD OF RECOUPMENT, TENDER SYSTEM,
ACCEPTANCE OF TENDER, TENDER COMMITTEE, PLACEMENT OF PURCHASE ORDER, VIGILANCE,
VARIOUS REGISTERS USED IN RECEIPT SECTION,, REGISTRATIONS OF PO ,RR, CHALLAN, INSPECTION
NOTES, HEALTH AND NUTRITION, REJECTION OF MATERIALS, REJECTION OF MEMO, REPLACEMENT OF
MATERIALS. CLAIM AGAINST RAILWAY, CONDUCT RULES, RAILWAY AUDIT, IMPORTANT MMIS
REPORTS, IMS, OFFICE PROCEDURE, CONTRACT MANAGEMENT, LIQUIDED DAMAGES, RISK PURCHASE,
EMD/SD, DEMURRAGE, WARFAGE, COLLECTION OF MATERIALS FROM PARCEL OFFICE, GOODS SHED,
BOOKING OF MATERIALS, PREVENTION OF FIRE, FIRE FIGHTING, EQUIPMENTS, SAFETY ETC.
11. REFRESHER COURSE FOR CLERICAL & SUPERVISOR STAFF OF STORES
DEPTT (DEPOT MANAGEMENT) (ST – 08)…
CLASSIFICATIONS OF STORES, RETURNED ADVICE NOTE, ITS VALUATION, ACCOUNTAL AND
DISPOAL ,SURVEY COMMITTEE, FUNCTIONS, AND RECOMMENDATIONS, PASS & PTOS AND LEAVE
RULES, PREVENTION OF INACTIVE, OVERSTOCK, SURPLUS ITEMS, PERFORMANCE MONTIORING OF
STORES DEPTT., , INVENTORY CONTROL, ABC,VED,FSN ANAYLSIS,TOR, YARD STICK TO MEASURE
STORES EFFICIENCY, HEALTH AND NUTRITION, D&AR, VIGILANCE , SCRAP DISPOSAL BY AUCTION
SALE, , VERIFICATION BY ACCOUNTS STAFF, VERIFICATION BY DEPARTMENTAL STAFF, STOCK SHEET
AND THEIR DISPOASL, STORES BUDGET AND RAILWAY BUDGET, SCRUTINY OF PROPOSALS , PRICE
LEDGER, STORES BILLS ETC. FOR FINANCE PURPOSES, PROCUREMENT AND STOCKING OF SAFTEY
ITEMS DIFFRENCE COMPARED TO OTHER ITEMS, IMS, CONDUCT RULES, IMPORTANT IMS REPORTS,
OFFICE PROCEDURE, CORPORATE SAFTEY PLAN, SAFTEY ISSUES INDENTIFIED FOR MATERIALS
MANAGEMENT, SAFTEY ITEMS AS SUGGESTED BY RDSO BRIEF REVIEW, DUTIES IN CASE OF FIRE,
PREVENTION OF FIRE, FIRE FIGHTING EQUIPMENTS, FIRST AID, WORKS PROGRAMME, M & P
PROGRRAMME, INSPECTION SCHEDULE OF STORES.
RWTI COURSES
01. BASIC WELDING TRAINING FOR BEGINNERS (MODULE–I)…
INTRODUCTION TO WELDING AND METALLURGY, WELDING SYMBOLS, WELDING JOINTS, WELDING
POSITIONS , PRINCIPLE OF WELDING ( MMAW, SAW, RESISTANCE WELDING ), GMAW AND FLUX
CORED WIRE, WELDING DEFECTS AND PREVENTION, SAFETY IN WELDING, COMMON TOOLS USED IN
WELDING, GAS CUTTING OXY-ACETYLENE),TYPES OF FLAMES, SS WELDING OF DIFFERENT GRADES ,
SELECTION OF WELDING PROCESSES, INSPECTION OF WELDING , DO’s & DON’Ts TO ASSES THE
QUALITY OF WELDS, PRACTICAL TRAINING , TESTING AND CERTIFICATION, IMS, HEALTH &
NUTRITION, , TESTING & CERTIFICATION.
02. REFRESHER COURSE FOR WELDING TECHNICIANS (MODULE-II)…
INTRODUCTION TO PRINCIPLES OF WELDING (MMAW, SAW), GMAW & FLUX CORED WIRE
WELDING WITH CO2. USE OF MEASURING GAUGES, VISUAL AIDS FOR WELD EXAMINATION, NEW
WELDING TECHNOLOGY IN THE RAILWAYS , WELDING DEFECTS, DETECTION METHODS LIKE DP
& MPI METHOD, WELDING SAFETY,,INTRODUCTION TO VIPASSANA, TESTING & CERTIFICATION.
03. REFRESHER COURSE FOR WELDING SUPERVISORS (MODULE–IV)…
WELDING TERMINOLOGY, GMAW, STAINLESS STEEL WELDING, MODERN WELDING TECHNOLOGY
IN THE RAILWAYS , WPS & PQR, WELDING DEFECTS, INSPECTION AND TESTING OF WELDING,
PRACTICAL ON MIG WELDING, YOG VIGIAN, HEALTH & NUTRITION, FIRE FIGHTING, IMS , TESTING &
CERTIFICATION.
SAFETY COURSES
01. FACTORIES ACT, INDUSTRIAL SAFETY & MATERIAL HANDLING (LT-03)…
FACTORIES ACT 1948 & ITS STATUARY REQUIREMENTS, SAFETY ON WORKPLACE, INTRODUCTION
TO MATERIAL HANDLING SAFETY, MATERIAL HANDLING EQUIPMENTS, WORKING & SAFETY.
02. DISASTER MANAGEMENT (KT-22)…
INTRODUCTION TO DISASTER MANAGEMENT PROGRAMME, INDUSTRIAL SAFETY, ELECTRICAL
EMERGENCY & SAFETY PLAN, CO2 STORAGE SYSTEM EMERGENCY PLAN, ROLE OF MEDICAL DEPTT. &
FIRST AID, ROLE OF RAILWAY PERSONNEL (INBOUND) DURING TRAIN ACCIDENT, LPG BULLET
EMERGENCY PLAN, PLAN FOR DEALING WITH SAFETY & FIRE HAZARDS, ROLE FOR FIRE BRIGADE
STAFF DURING DISASTER MGMT, ROLE OF CIVIC AUTHORITIES DURING DISASTER MANAGEMENT,
WELDING SAFETY.
03. REFRESHER COURSE FOR SHUNTING STAFF (BY-01)…
DEFINITIONS, PROCESS OF SHUNTING, SAFETY INSTRUCTIONS DURING SHUNTING WITH R.R.V &
TRAVERSER, PRACTICAL TRAINING ON R.R.V SHUNTING, TYPE OF SHUNTING, SIGNALS DURING
SHUNTING, DIFFERENCE BETWEEN R.C.F & MAIN LINE SHUNTING, SHUNTING OF COACHES BY
TRACTOR SHUNTER. SAFETY INSTRUCTIONS DURING TRACTOR SHUNTING, PRACTICAL TRAINING ON
TRACTOR SHUNTING.
COMPUTER COURSES
01. BASIC COMPUTER COURSE (KF-10) …
COMPUTER HARDWARE, INFORMATION TECHNOLOGY, MAIN-FRAME, , COMPUTER SOFTWARE, MS
WORD THEORY AND PRACTICALS, IMS, MS EXCEL AND EXCEL PRACTICALS.
02. ADVANCE COMPUTER COURSE (KF-12)…
INTRODUCTION TO COMPUTERS, COMPUTER HARDWARE, MS WORD, , MS EXCEL & MS EXCEL
PRACTICALS, IMS, MS POWER POINT THEORY AND PRACTICALS, MS ACCESS THEORY & PRACTICALS.
OTHER COURSES
01. INDUSTRIAL APPLICATIONS OF HYDRAULICS & ELECTRO-PNEUMATICS
(KJ-23)…
PRACTICAL IN AUTOMATION LAB, SYMBOLS ETC., DETAILS ON HYDRAULIC CYLINDER &
VALVES ETC., BASICS OF HYDRAULIC AND PNEUMATICS, PASCAL LAW, WORKING PRINCIPLE, ,
HYDRAULIC MOTORS PUMPS, HYDRAULIC JACK AND THEIR WORKING, MAINTENANCE ASPECTS,
EXERCISES FOR DIFFERENT TYPES OF CIRCUITS (HYDRAULICS), HYDRAULIC MAINTENANCE &
TROUBLE SHOOTINGS, HEALTH, NUTRITION & FAMILY WELFARE, ACTUAL WORKING OF
HYDRAULIC/PNEUMATIC SYSTEM, IMS, EXERCISES FOR DIFFERENT TYPES OF CIRCUITS
(PNEUMATICS), PRACTICAL ON PNEUMATIC CYLINDER & VALVE AND OIL FILTRATION ETC. , FIRE
FIGHTING, PRACTICAL OF SINGLE ACTING CYLINDER, DOUBLE ACTING CYLINDER, DIRECTION
CONTROL AND FLOW CONTROL VALVE ON TRAINER KIT.
02. PROGRAMMING & OPERATION OF FMS & CNC MACHINE (KG-34)…
INTRODUCTION OF CNC MACHINES & FMS CODES OF PROGRAMMING,PREPARATORY COMMANDS,
MACHINE COMMANDS, MISC. COMMANDS, , NESTING PROGRAM, STUDY OF PROGRAMMING,
EXCERCISES ON CNC MACHINE (TRIAC), PROGRAMMING EXERCISE INVOLVING TYPICAL OPERATION,
ZERO OFF-SET, TOOL OFF-SET, TOOL COMPENSATION,PROGRAMMING
& PRACTICALS ON CNC
TRAINER LATHE & CNC LATHE (ORAC), SUBROUTINE PROGRAMMING, BASIC PRINCIPLES OF FIXED
CYCLES, STUDY OF PROGRAMMING CODES, PROGRAMMING FEEDING & PRACTICAL, IMS,
SYNCHRONIZED MODE, INTRODUCTION OF PROFILE CUTTING MACHINE, CONCEPT & PROGRAMMING
OF PROFILE CUTTING MACHINE, ABSOLUTE & INCREMENTAL PROGRAMMING, FIRE FIGHTING,
DEMONSTRATION IN AUTOCYCLE.
03. IMS, 5-S, EMS POLICY & LEGISLATIONS, (KI-21)…
ISO 9001; 2008, ISO: 14001; 2004 & OHSAS 18001; 2007, BASICS OF 5S, INTERNAL AUDIT OF
TTC (PRACTICAL), SCOPE & UTILITY OF 5S IN RCF. INDIAN ELECTRICITY ACT & RULES, ELECTRICAL
ACCIDENTS SAFETY, WATER ACT, EMERGENCY, PREPAREDNESS FOR FIRE ESPECIALLY IN LPG BULLET
AREA, WORK STATION ETC, ENVIRONMENT MANAGEMENT SYSTEM
04. INTRODUCTION TO DISCIPLINE & APPEAL RULES (KR-01)…
INTRODUCTION ABOUT D&AR, PENALTIES & APPEAL, INQUIRY, SUSPENSION.
05. USE OF POWER/SMALL TOOLS (BJ-01)…
INTRODUCTION, NEED AND ADVANTAGES OF POWER/SMALL TOOLS,PRACTICAL DEMONSTRATION
OF PAINT SHOP POWER/SMALL TOOLS, GENERAL OPERATING INSTRUCTIONS, SAFETY, PRECAUTIONS
AND MAINTENANCE TIPS, PRACTICAL DEMONSTRATION OF FITTING TOOLS & CARPENTARY SHOP
POWER / SMALL TOOLS.
06. EOT CRANE/TRAVERSER OPERATIONS (BV-01) …
INTRODUCTION ABOUT EOT, ITS COMPONENTS AND ASSEMBLIES, INSTRUCTIONS FOR CRANES
SAFE OPERATION, DO's & DON'Ts AND HAND SIGNALS, MOTOR BRAKES, GEAR, LT SHAFT, WHEELS, ,
TRAVERSER, ITS COMPONENTS AND ASSEMBLIES & ITS WORKING MECHANISM, INTRUCTIONS FOR
SAFE OPERATION OF TRAVERSER AND DO's & DON'Ts. FIRE FIGHTING, HEALTH & NUTRITION, SAFETY
(MECHANICAL).
07. FLT/INDUSTRIAL VACUUM SWEEPERS (BV-02) …
INTRODUCTION TO FLT & INDUSTRIAL SWEEPING MACHINE, ENGINES, TRANSMISSION SYSTEM OF
ENGINES, LUBRICATION, FUEL & COOLING SYSTEM, , HEALTH & NUTRITION, IMS, INSTRUCTION FOR
SAFE OPERATION OF FLT & INDUSTRIAL SWEEPING MACHINE. MORAL EDUCATION.
08. PLANT OPERATION AND MAINTENANCE (KJ-36) …
EOT, FLT, INDUSTRIAL SWEEPING MACHINE. SAFE OPERATION, DO’s AND DON’Ts, OPTIMUM
UTILIZATION OF PLANT RESOURCES, REPLACEMENT ANALYSIS, TOTAL PRODUCTIVE MAINTENANCE,
ECONOMIC ORDER QUANTITY, BASIC OF HYDRAULICS, SYMBOLS, CIRCUITS, ACTUATOR & MOTOR,
MAINTENANCE, ITS TYPES AND NECESSITY, ROLE OF MH EQUIPMENTS & ITS SAFETY IN PLANT
OPERATION, ATTITUDE, DIAGNOSIS OF FAULTS & FURTHER RELATED RECTIFICATION ACTIVITIES, FIRE
FIGHTING, TYPES OF FIRE & FIRE EXTINGUISHERS, MOCK DRILL & EMERGENCY EVACUATION, TOTAL
COSTING AND ITS VARIOUS CONSTITUENTS AS APPLICABLE TO COSTING IN RCF, TOTAL COSTING &
SAVING OF MH EQUIPMENTS.
09. DESIGN AND DRAWING APPREACIATION (KD-56) …
TYPES OF LINES, TYPES OF PROJECTIONS AND ANGLES (FIRST ANGLE AND THIRD ANGLE). GEOMETRIC
SYMBOLS, LIMITS AND FITS, TOLERANCES, WELDING SYMBOL, MACHINING SYMBOL, MATERIAL
SPECIFICATIONS - (IS, BS, DIN, MDTS, RDSO). READING OF RCF, ICF, RDSO, DLW DRAWINGS AND
SYSTEMS. INTODUCTION TO AUTO-CAD, JOINTS AND FASTENERS, PSL AND ITS USE.
टी.टी.सी. – आर.सी.एफ. म गितिविधयां
DEEP PRAJJAVALAN BY CME/RCF
CULTURAL ACTIVITY AT TTC
CULTURAL ACTIVITY AT TTC
AWARD DISTRIBUTION BY GM/RCF
CULTURAL ACTIVITY AT TTC
CULTURAL ACTIVITY AT TTC
TTC AT A GLANCE
FURNISHED ROOM AT TTC HOSTEL
.
TTC CLASS ROOM
TTC ENTRANCE
MOCK UP SHED AREA
TTC CANTEEN
HYDRAULICS & AUTOMATION LAB
हमारा ल य
अपने संकाय के तकनीिक ज्ञान तथा प्रिशक्षण कौशल के
िनरं तर संवधर्न
वारा
रे लवे पयर्वेक्षक और तकनीिशयन के िलए एलएचबी प्रौ ोिगकी का
सवार्िधक प्रिसद्ध व ् िव व
तरीय प्रिशक्षण कद्र बनना ।
OUR MISSION
TO BECOME THE MOST RENOWNED, WORLD CLASS
TRAINING CENTRE FOR LHB TECHNOLOGIES FOR
RAILWAY SUPERVISORS AND TECHNICIANS
BY
DEVELOPING OUR FACULTY WITH CONSTANT
ENHANCEMENT OF THEIR TECHNICAL KNOWLEDGE,
INNOVATIVE AND TRAINING SKILLS.
NOTE: TRAINING CALENDAR FOR THE YEAR 2014-15 CAN BE BROWSED ON RCF WEBSITE
http//: www.rcf.indianrailways.gov.in
© Copyright 2024 ExpyDoc
