Proficool FANS Sp. z o.o.
Phone: +48 32 441 67 00-02
Fax: +48 32 441 67 10
E-mail: [email protected]
Technical and Commercial office:
ul. Ceglana 4, 40-514 Katowice
www.proficool.pl
www.fansct.com
BORA SERIES WET COOLING TOWERS
BORA 5000 WITH COLLECTIVE TRAY
Technical data: Dimensions: 5210 x 5210 x 7364* mm
Modular dimension: 5000 x 5000 mm
Fan diameter: 3200 mm
Nominal water flow: 200 – 500 m3/h
Cooling capacity: 1200 – 26200 kW
Weight without water: 6 150 kg
Filling: PRO12 / PRO19 made of PP / PVC
Filling height: up to 1500 mm
Connectors:
Inlet connector: DN 300 PN10 made of PP
Outlet connector: DN 350 PN10 made of PP
Fan unit: Fan: WO3048 - 5 - (7)
Air efficiency: Q = up to 80 m3/s
Static pressure: ΔPst = up to 210 Pa
Air density: r = 1,13 kg/m3
Motor’s drive: Nominal power: Ns = 18,5; 22; 30; 37 kW
Supply voltage: U = 400 V
Casing type / Ingress protection rating: IM 3011(V1) / IP 56
Frequency: f = 50 Hz
Isolation class: F
*Approximate dimension – total height of cooling tower depends on the type of motor / gearmotor.
CTI Member
Proficool FANS Sp. z o.o.
Phone: +48 32 441 67 00-02
Fax: +48 32 441 67 10
E-mail: [email protected]
Technical and Commercial office:
ul. Ceglana 4, 40-514 Katowice
www.proficool.pl
www.fansct.com
CTI Member
BORA SERIES WET COOLING TOWERS
BORA 5000 WITH COLLECTIVE TRAY
Sample parameters
Symbol
Value
Unit
Wet bulb temperature:
tm
21 (tamb = 30; humidity = 40%)
˚C
Hot water temperature:
T1
Cold water temperature:
T2
Amount of water (Vmax=700):
Vw
500
400
300
200
m3/h
Heat efficiency:
Q
4656
6052
6285
5354
kW
Maximal theoretical water loss:
-
2,60
3,90
5,20
6,50
%
Maximal water temperature:
Cooling tower component
Supporting structure:
T1 max
35
40
45
50
˚C
27
˚C
Standard: up to 65
High temperature execution: up to 80
˚C
Characteristic
Walls and roof – corrosion resistant fiberglass reinforces polyester (FRP)
Skeleton – main supporting structure: stainless steel 0H18N9
Standard: PRO19 / PRO12
Cooling fill:
Option: splash cooling fill
(solution for dirty water)
ProfiOpen / ProfiNet
PP / PVC
Drift eliminator:
ProTep 130 / ProEuk 150
PP / PVC
Fan impeller: WO3048 / FRP
Silent or ultrasilent
Motor: Ns=18,5; 22; 30; 37 kW
IP56 / U=400V / 329 – 367 rpm
Inlet connector: DN300 PN10 / PP
(HT: steel)
Outlet connector: DN350 PN10 / PP
(HT: steel)
ProLep 65
PP / PVC
Stainless steel A2
(Option: acid resistant steel A4)
Inspection: 430 x 360 mm Service: 1500 x 1044 mm Fan:
Connectors:
Air inlet louvers:
Fasteners:
Manhole:

ELECTRICAL ACCESSORIES Single phase speed controller REB

PICKLE INJECTOR „INJECT-O-MAT“ PSM-24-4.0-I

WAFER TYPE CHECK VALVE RSK

download - Fleu Valve

Proposed Colors