“Sure Lift” V (SLV) – MRL Elevator Pre Engineered

Shanghai Total Elevator Co., Ltd. 上海托泰电梯有限公司
Design & Manufacture of Hydraulic & Traction Elevators
“Sure Lift” V (SLV) – MRL Elevator
├ Pre Engineered Elevator Package with Standard or Bespoke Cabin Designs ┤
The “Sure Lift” V MRL Elevator is a high quality product designed to EN:81 standards. The
manufacturing technology guaranties strict tolerances to ensure passenger safety. The complete
electrical/electronic control system is factory tested prior to delivery and mechanical components are sub
assembled for guaranteed quality and reduced installation times, while maintaining a high standard of
installation workmanship.
Parameters
Features
Payload 3,000 – 4,000kg
Gearless PM Machine
Speed 0.8m/s
3vF Inverter Drive
Stops 2 – 12
CAN BUS Control Technology
Doors – Centre or Side Opening
DHCP Direct Handshake Protocol
Car Entrances – 1 or 2
CE Certified Components
Pit Depth – 1,300mm
Automatic Car & Landing Doors
Headroom – 3,450mm
Traffic Flow Indication
Benefits
⌐ Energy efficient power savings
⌐ Minimum shaft dimensions
⌐ Simple installation
⌐ Fast delivery
⌐ Maintenance friendly
⌐ Cabin design flexibility
The standard lift package includes;






A lift cabin with 1.5mm painted sheet steel front wall, car doors, lateral and rear walls
High quality automotive painted steel ceiling with flush fitted fluorescent lighting
4 x stainless steel Car Operating Panel with LED indication
Car floor finished in 5mm steel cheque plate
Landing doors and frames in painted sheet steel
Collective hall call buttons with floor indication and arrival chimes
1050, Youyi Road, Baoshan, Shanghai, 201900, PRC
上海宝山友谊路 1050 号 201900 PRC
P: +86 21 66791078 F: +86 21 5678 3788 [email protected] www.totalelevators.com
ISO9001: 2000
Certificate No: 02007Q11428R1M
Shanghai Total Elevator Co., Ltd. 上海托泰电梯有限公司
Design & Manufacture of Hydraulic & Traction Elevators
“Sure Lift”® V – Specification
Model No. SLV-4000-0.8-CO
1 - General Information
1.1
Design Standard
EN:81-1 & Lift Directive 95/16/EC
1.2
Certification
CE Certified Components
1.3
Lift Type
Car (Vehicle) Lift
1.4
Disabled Compliance
DDA
1.5
Model Number
SLV-4000-0.8-CO
1.6
Payload
4000kg – 53 Passenger
1.7
Speed
0.8m/s
1.8
Stops
Maximum 12
1.9
Landing Entrances
Maximum 24
1.10
Car - Entrances
Maximum 2
1.11
Car - Width (Internal)
2,500mm
1.12
Car - Depth (Internal)
5,800mm
1.13
Car - Height (Internal)
2,200mm for 3,450mm Headroom
1.14
Door – Type
6PCO (Centre Opening)
1.15
Door - Width (Clear)
2,500mm
1.16
Door - Height (Clear)
2,100mm
1.17
Shaft - Width (Internal)
3,450mm
1.18
Shaft - Depth (Internal)
6,300mm Single Entrance 6,600mm Double Entrance
1.19
Travel (Minimum / Maximum)
2,400mm / 33,000mm
1.20
Head Room/Overhead
3,450mm
1.21
Pit Depth
1,300mm
2 - Lift Car
2.1
Finish - Front Wall
1.5mm Automotive Painted Sheet Steel
2.2
Finish - Side Wall
1.5mm Automotive Painted Sheet Steel
2.3
Finish - Rear Wall
1.5mm Automotive Painted Sheet Steel
2.4
Finish - Skirting
Wall Panel is Flush with Car Floor
2.5
Finish - Ceiling
High Quality Automotive Painted Sheet Steel
2.6
Finish - Floor
5mm Steel Cheque Plate
2.7
Car Lighting + Emergency Lighting
6 x Recessed Fluorescent Lights
2.8
Ventilation
Natural Ventilation
2.9
Handrail
Not Required
2.10
Ventilation Fan
3 x AC 100-220v 50/60Hz / <47dB (A) @ 6-0.5m³/min
2.11
Empty Car Weight
3,200kg
1050, Youyi Road, Baoshan, Shanghai, 201900, PRC
上海宝山友谊路 1050 号 201900 PRC
P: +86 21 66791078 F: +86 21 5678 3788 [email protected] www.totalelevators.com
ISO9001: 2000
Certificate No: 02007Q11428R1M
Shanghai Total Elevator Co., Ltd. 上海托泰电梯有限公司
Design & Manufacture of Hydraulic & Traction Elevators
3 - Technical Information
Machine
3.1
Machine Level
Top Floor
3.2
Machine Location
Inside Shaft R/H Side
3.3
Starting Drive Type
VVVF - DHCP
3.4
Inverter Type & kW Rating
Monarch / 32kW
3.5
Machine Model
Diana ll–16–2000-2
3.6
Machine Type
PM Gearless
3.7
Overall Efficiency / Duty
S5 / 40%
3.8
Machine kW Rating
22kW
3.9
Machine Running Current
48Amps
3.10
Machine Starting Current
85Amps
3.11
Main Supply Circuit Breaker Rating
60Amps
3.12
Heat Loss
1509Kcal/Hr
3.13
Traction Sheave Diameter
410 mm Ø 93 RPM 1 m/s
Mechanical
3.14
Sling Suspension / Configuration
Counter levered / Under Slung
3.15
Roping Ratio
4:1
3.16
Diverter Pulley Diameter
410mm
3.17
Angle of Wrap (Degrees)
180°
3.18
Sheave Groove Profile
U Grove / Under Cut
3.19
Main Guide Rails Type & Size
T127
127 x 90 x 16
3.20
CWT Guide Rails Type & Size
T90
90 x 75 16
3.21
Balancing Percentage
50%
3.22
Lift well Lifting Beam SWL
1,500kg
3.23
Number of Ropes
10
3.24
Diameter of Ropes
10mm
3.25
Construction of Ropes
19S+NF
3.26
Minimum Breaking Load
50.6kN
Ropes
Control System
3.27
Control Cabinet Level
Top Floor – Inverter & Main Contactors in Shaft
3.28
Cabinet Dimensions
2,100mm (h) x 600mm (w) x 350mm (d)
3.29
Cabinet Finish
Hairline Stainless Steel
3.30
Control System
Monarch NICE3000
3.31
Power Supply
3Ø 380-440 Volts
3.32
Control Type (Standard)
Simplex - Collective
3.33
Emergency Lowering Device
Electric Brake Release
3.34
Audible Alarm
Siren on Car Roof
3.35
Load Weighing
Electronic Control – Sensor on Hoisting Ropes
1050, Youyi Road, Baoshan, Shanghai, 201900, PRC
上海宝山友谊路 1050 号 201900 PRC
P: +86 21 66791078 F: +86 21 5678 3788 [email protected] www.totalelevators.com
ISO9001: 2000
Certificate No: 02007Q11428R1M
Shanghai Total Elevator Co., Ltd. 上海托泰电梯有限公司
Design & Manufacture of Hydraulic & Traction Elevators
4 - Doors
4.1
Door Manufacturer
Fermator
4.2
Door Type
6PCO
4.3
Fire Rating
BS476
4.4
Door Width & Height
2,500mm
4.5
Sill’s
Heavy Duty
4.6
Car Door Panel Finish
Automotive Painted Steel
4.7
Landing Door Panel Finish
Automotive Painted Steel
4.8
Landing Door Jamb Type
Slim-line Box Type
4.9
Landing Door Jamb Finish
Automotive Painted Steel
4.10
Door Protection Device
2D Full Height Infra Red Scanner
2,100mm
5 - COP (Car Operating Panel)
5.1
COP - Location
2 x Side Wall L/H & R/H Side
5.2
COP - Type
Horizontal with Hinged Door/Screw Fixings
5.3
COP - Faceplate Finish
Hairline Stainless Steel
5.4
COP - Buttons
Floor Call, Door Open, Door Close, Alarm
5.5
COP - Car Indicator Type
LCD Screen
5.6
COP - Engraving
Lift No., Load 4,000kg, 58 Persons, Logo
5.7
Floor Denomination (Standard)
0–1
5.8
Main Floor
0
5.9
Voice Announcement
Speaker Mounted in COP
5.10
Emergency Auto Dial Telephone
Design Com - emFONE
5.11
Alarm Push Button
2 Pole for Siren & Auto Dial Telephone
5.12
Button Type
Tactile + Braille
5.13
Button LED Colour
Blue
5.14
Key Switch Function
1 x Fireman Drive
6 - LOP (Landing Operating Panel)
6.1
LOP - Type
Fixed in Door Frame – Vertical R/H Side
6.2
LOP – Faceplate Finish
Hairline Stainless Steel
6.3
LOP – Buttons
Down Arrow – Up Arrow
6.4
Button Type
Tactile + Braille
6.5
Button LED Colour
Blue
6.6
LOP – Engraving
DO NOT USE LIFT IF THERE IS A FIRE
6.7
Fire Fighters Switch
1 x Key Switch – „0‟ Floor
1050, Youyi Road, Baoshan, Shanghai, 201900, PRC
上海宝山友谊路 1050 号 201900 PRC
P: +86 21 66791078 F: +86 21 5678 3788 [email protected] www.totalelevators.com
ISO9001: 2000
Certificate No: 02007Q11428R1M
Shanghai Total Elevator Co., Ltd. 上海托泰电梯有限公司
Design & Manufacture of Hydraulic & Traction Elevators
7 - HOP (Hall Indication Panel) Details
7.1
HOP - Type
Fixed in Door Frame – Horizontal Above
7.2
HOP - Displays
All Floors
7.3
HOP - Faceplate Finish
Hairline Stainless Steel
7.4
HOP - Landing Indicator Type
30mm Dot Matrix
7.5
Indication - Direction Arrows
Up/Down Arrows Indicating Direction of Travel
7.6
Indication - Floor Denomination
Displays Lift Position
7.7
Indication - Messages
Out of Service – Full Load – Overload
7.8
Indication - Arrival Chime Up Direction
Single Tone
7.9
Indication - Arrival Chime Dn Direction
Double Tone
8 - For Your Benefit
8.1
Plug System – Door Lock Circuit
Plug in wiring system for landing door safety circuit
8.2
Plug System – Control Circuit
Plug in wiring system for control system
8.3
Plug System – Power Circuit
Plug in wiring system for power system
8.4
Hilti - Anchor Bolt
Masonry fixings for shaft brackets & doors
8.5
Shaft Flushing Panel (Fascia’s)
Steel plate between lading door header & toe guard
8.6
Shaft Electrical Duct
Steel cable duct for shaft wiring protection
8.7
Pit Ladder 3,000mm
Aluminium ladder with wall fixing brackets
1050, Youyi Road, Baoshan, Shanghai, 201900, PRC
上海宝山友谊路 1050 号 201900 PRC
P: +86 21 66791078 F: +86 21 5678 3788 [email protected] www.totalelevators.com
ISO9001: 2000
Certificate No: 02007Q11428R1M

Download Report