REFERENCES - IR@INFLIBNET

220
REFERENCES
1.
Alam M.J. and Santhakumar A.R. (1996), ‘Reliability Analysis and
Full-Scale Testing of Transmission Tower’, Journal of Structural
Engineering, Vol. 122, No. 3, pp. 338-344.
2.
Al-Bermani F. and Kitipornchai S. (2003), ‘Numerical Simulation of
Structural Behaviour of Transmission Towers’, Journal of Thin walled
Structures, Vol. 41, Nos. 2-3, pp. 167-177.
3.
Al-Bermani F., Kitipornchai S. and Chan R.W.K. (2009), ‘Failure
Analysis of Transmission Towers’, Journal of Engineering Failure
Analysis, Vol. 16, pp. 1922-1928.
4.
Al-Bermani F., Mahendran M. and Kitipornchai S. (2004), ‘Upgrading
of Transmission Towers Using a Diaphragm Bracing System’, Journal
of Engineering Structures, Vol. 26, pp. 735-744.
5.
Al-Bermani F.G.A. and Kitipornchai S. (1993), ‘Nonlinear Finite
Element Analysis of Latticed Transmission Towers’, Engineering
Structures, Vol. 15, No. 4, pp. 259-269.
6.
Al-Bermani F.G.A. and Kitipornchai S. (1992), ‘Nonlinear Analysis
of Transmission Towers’, Engineering Structures, Vol. 14, No. 3,
pp. 139-150.
7.
Ali Davaran (2001), ‘Effective Length Factor for Discontinuous
X-Bracing Systems’, Journal of Engineering Mechanics, Vol. 127,
No. 2, pp. 106-112.
8.
Ali Davaran and Nader Hoveidae (2009), ‘Effect of Mid-Connection
Detail on the Behaviour of X-Bracing Systems’, Journal of
Constructional Steel Research, Vol. 65, pp. 985-990.
9.
Anjam. R (1991), ‘Galloping and Broken Conductor Analysis of
Transmission Lines’, Ph.D thesis, Iowa State University, Ames, Iowa.
221
10.
Byoung-Wook Moon, Ji-Hun Park, Sung-Kyung Lee, Jinoo Kim,
Taejin Kim and Kyung-Won Min (2009), ‘Performance Evaluation of
a Transmission Tower by Substructure Test’, Journal of Constructional
Steel Research, Vol. 65, pp. 1-11.
11.
Cannon D.D. and Nickerson R. (1993) ‘Results of TLMRC Research
on X-Bracing Strength in Lattice Transmission Towers’, IEEE
Transactions on Power Delivery, Vol. 8, No. 1, pp. 285-292.
12.
“Code of practice for General Construction in Steel” (2007). IS: 800,
Bureau of Indian Standards, New Delhi, India.
13.
“Code of practice for Use of Structural Steel in Over Head
Transmission Line Towers - Permissible stresses.” (1992). IS: 802
(Part 1 / Sec 2), Bureau of Indian Standards, New Delhi, India.
14.
“Code of practice for Use of Structural Steel in Over Head
Transmission Line Towers- Testing.” (1978). IS: 802, (Part III) Bureau
of Indian Standards, New Delhi, India.
15.
Da Silva J.G.S, Da Vellasco.P.C.G.S, De Andrade S.A.L., DE
Oliveira.M.I.R. (2005), ‘Structural Assessment of Current Steel Design
Models for Transmission and Telecommunication Towers’, Journal of
Constructional Steel Research, Vol. 61, pp. 1108- 1134
16.
“Design of Latticed Steel Transmission Structures.” (2000). American
Standard ASCE 10- 97, Reston, Virginia.
17.
Elgaaly M., Davids W. and Dagher H. (1992), ‘Non Slender Single
Angle Struts’, Engineering Journal, American Institute of Steel
Construction, Second Quarter, pp. 49-58.
18.
Faisal Abdullah and Al-Mashary (1999), ‘Nonlinear Analysis of
Transmission Towers’, J. King Saud University, Vol. 11, Eng. Sci.,
Vol. 11, pp. 19-32.
19.
Faisal Al-Mashary, Abdulrahim Arafah, Ghulam Husain Siddiqi and
Yousef Al-Salloum (1992), ‘The Report on Investigation of Failure of
Six Transmission Towers’, Riyadh: Saudi Consolidated Electricity
Company.
20.
Fernandez J., Pernia A., Martinez-de-Pison F.J., Lostado R. (2010),
‘Prediction Models for Calculating Bolted Connections using Data
Mining Techniques and the Finite Element Method’, Journal of
Engineering Structures, 32, pp. 3018-3027.
222
21.
Fred Segal, Robert Levy and Avigdor Rutenberg (1994) ‘Design of
Imperfect Cross–Bracings’, Journal of Engineering Mechanics,
Vol. 120, No. 5, pp. 1057-1074.
22.
Hemant Patil, Gaurang Doshi, Prasad Rao N., Deepak Lakhpati and
Venkat Subramanian (2010), ‘Failure Analysis of Transmission Line
Towers: A Case Study’, The IUP Journal of Structural Engineering,
Vol. 3, No. 1, pp. 20-27.
23.
Hong-Nan Li, Wen-Long Shi, Guo-Xin Wang and Lian-Guang Jia
(2005), ‘Simplified Models and Experimental Verification for Coupled
Transmission Tower Line System to Seismic Excitations’, Journal of
Sound and Vibration, Vol. 286, pp. 569-585.
24.
Hwan-Seon Nah, Hyeon-Ju Lee and Kang-Seok Kim (2009)
‘Evaluation of Slip Coefficient of Slip Critical Joints with High
Strength Bolts’, Journal of Structural Engineering and Mechanics,
Vol. 32, No. 4, pp. 477-488.
25.
Issa R.R.A. and Richard Avent R. (1995), ‘Discrete-Field Stability
Analysis of X-Braced Lattices’, Journal of Structural Engineering, Vol.
121, No. 8, pp. 1213-1220.
26.
Jared J. Perez, Wendelin H. Mueller III, and Leon Kempner. Jr. (2009),
‘Strength of Steel Angles Subjected to Short Duration Axial Loads’
conference proceedings on ‘Electrical Transmission and Substation
Structures’, Technology for the Next Generation, pp. 473-478.
27.
Jiho Moon, Ki-Yong Yoon, Tong-Seok Han and Hak-Eun Lee (2008),
‘Out of Plane Buckling and Design of X-Bracing Systems with
Discontinuous Diagonals’, Journal of Constructional Steel Research,
Vol. 64, pp. 285-294.
28.
Ju S.H., Fan C.Y. and Wu G.H. (2004), ‘Three Dimensional Finite
Elements of Steel Bolted Connections’, Engineering Structures,
Vol. 26, pp. 403-413.
29.
Kemp A.R. and Behncke R.H. (1998), ‘Behaviour of Cross-Bracing in
Latticed Towers’, Journal of Structural Engineering, Vol. 124, No. 4,
pp. 360-367.
30.
Kitipornchai S., Peyrot A.H. and Al-Bermani F.G.A. (1994), ‘Effect
of Bolt Slippage on Ultimate Behaviour of Lattice Structures’, Journal
of Structural Engineering, Vol. 120, No. 8, pp. 2281-2287.
223
31.
Knight G.M.S. and Santhakumar A.R. (1993), ‘Joint Effects on
Behaviour of Transmission Towers’, Journal of Structural Engineering,
Vol. 119, No. 3, pp. 698-712.
32.
“Lattice Towers and Masts: Part 3 Code of Practice for Strength
Assessment of Members of Lattice Towers and Masts.” (1999). British
Standard BS: 8100 - 3:1999, British Standards Institution, London.
33.
Li Li (1990), ‘Dynamic Loads on Pole Transmission Line Structures
from Galloping Conductors’, Ph.D thesis, Iowa State University,
Ames, Iowa.
34.
Loading tests on overhead line structures, IEC 60 652, 2002, Geneva,
Switzerland.
35.
McClure G. and Lapointe M. (2003), ‘Modeling the Structural
Dynamic Response of Overhead Transmission Lines’, Computers and
Structures, Vol. 81, pp. 825-834.
36.
Menezes R.C.R and Da Silva B.G.F., (2000), ‘On the Variability of
Mechanical Properties for Transmission Line Steel Towers’, Authors
Study Committee SC 22 WG (TF) WG 22.08 Journal of ‘ELECTRA’
ELT_189_3 . pp 57- 71
37.
Mohan Gupta and Gupta L.M. (2004), ‘Evaluation of Stress
Distribution in Bolted Steel Angles under Tension’, Electronic Journal
of Structural Engineering, Vol. 4, pp. 17-27.
38.
Murtagh.P.J, Basu.B, and Broderick.B.M. (2004), ‘Simple Models for
Natural Frequencies and Mode Shapes of Towers Supporting Utilities’,
Journal of Computers and Structures, 82, pp. 1745–1750.
39.
Natarajan K. and Santhakumar A.R. (1995), ‘Reliability - Based
Optimization of Transmission Line Towers’, Journal of Computers and
Structures, Vol. 55, pp. 387-403.
40.
NE-NASTRAN, Version 8.1, 2001, Noran Engineering inc, Los
Alamitos, United States of America.
41.
Phill-Seung Lee and Ghyslaine McClure (2007), ‘Elastoplastic Large
Deformation Analysis of a Lattice Steel Tower Structure and
Comparison with Full-Scale Tests’, Journal of Constructional Steel
Research, Vol. 63, pp. 709 - 717.
224
42.
Picard A. and Beaulieu D. (1987) ‘Design of Diagonal Cross cross
bracings Part 1: Theoretical study’, Engineering Journal / American
Institute of Steel Construction’, Third Quarter, pp. 122-126.
43.
Prasad Rao N., Mohan S.J. and Lakshmanan N. (2004), ‘A Semi
Empirical Approach for Estimating Displacements and Fundamental
Frequency of Transmission Line Towers’, Journal of Structural
Stability and Dynamics, Vol. 4, No. 2, pp. 181-195.
44.
Rao N.P. and Kalyanaraman V. (2001), ‘Non Linear Behaviour of
Lattice Panel of Angle Tower’, Journal of Constructional Steel
Research, Vol. 57, pp. 1337-1357.
45.
Rao N.P., Mohan S.J. and Lakshmanan N. (2005), ‘A study on Failure
of Cross Arms in Transmission Line Towers during Prototype
Testing’, Journal of Structural Stability and Dynamics, Vol. 5, No. 3,
pp. 1337-1357.
46.
Reid J.D. and Hiser N.R. (2005), ‘Detailed Modeling of Bolted Joints
with Slippage’, Journal of Finite Elements in Analysis and Design,
Vol. 41, pp. 547-562.
47.
Ronaldo C. Battista, Rosangela S. Rodrigues, and Michele S. Pfeil
(2003), ‘Dynamic Behaviour and Stability of Transmission Line
Towers Under Wind Forces’, Journal of Wind Engineering and
Industrial Aerodynamics, 91, pp. 1051-1067.
48.
Sanjeev Gupta, Wipf T.J., Fanous F., Baenziger M. and Hahm Y.H.
(1994), ‘Structural Failure Analysis of 345 kV Transmission Line’,
IEEE Transactions on Power Delivery, Vol. 9, No. 2, pp. 894-903.
49.
Stoman S.H. (1988) ‘Stability Criteria for X -bracing Systems’, Journal
of Engineering Mechanics, Vol. 114, No. 8, pp. 1426-1434.
50.
Stoman S.H. (1989) ‘Effective Length Spectra for Cross Bracings’,
Journal of Structural Engineering, Vol. 115, No. 12, pp. 3112-3122.
51.
Ungkurapinan N., Chandrakeerthy S.R. De S., Rajapakse R.K.N.D.
and Yue S.B. (2003), ‘Joint Slip in Steel Electric Transmission
Towers’, Engineering Structures, Vol. 25, pp. 779-788.
52.
Timoshenko and Gere (1985), ‘Theory of Elastic Stability’,
International student edition, Second edition, McGraw-Hill Book
Company, Inc., Singapore.
225
53.
Wang D.Q. and Boresi A.P. (1992) ‘Theoretical Study of Stability
Criteria for X –Bracing Systems’, Journal of Engineering Mechanics,
Vol. 118, No. 7, pp. 1357-1364.
54.
Wipf. T, Baenziger. M, Fanous. F, Gupta. S and Anjam. R (1991), ‘Ice
Storm Damage Assessment of the Lehigh- Sycamore 345kV
Transmission Line’, final report submitted to Iowa Power Company,
Ames, Iowa.
55.
Xiaohong Zhang (2009), ‘Dynamic post-elastic response of
transmission towers’, Ph.D thesis, Department of Civil Engineering
and Applied Mechanics, McGill University. Canada.
56.
Zinnia Nair, Aparna K.M., Khandagale R.S. and Gopalan T.V. (2005),
‘Failure of 220 kV Double Circuit Transmission Line Tower Due to
Lightning’, Journal of Performance of Constructed Facilities, Vol. 19,
pp. 132-137.