Ventilation technology COMPAIR®

Ventilation technology
®
COMPAIR
Ventilation technology
Power
Ventilation
technology
COMPAIR®
Flexible system solutions
remove your kitchen vapours
COMPAIR® stainless steel external blinds
An eye-catcher on any outside wall
Page 193-196
COMPAIR® flow 150 (system Ø 150)
The range for top flow performance
77
COMPAIR® flow 125 (system Ø 125)
Strong for fresh and waste air technology
Page 213-228
169
COMPAIR® flow round 150 (system Ø 150)
High in volume and easy to install
Page 229-234
COMPAIR® flow round 125 (system Ø 125)
High in volume and easy to install
Page 235-240
55
COMPAIR® top (system Ø 125 flat)
Powerful ventilation technology
218
55
108
Page 241-252
COMPAIR® norm (system Ø 100)
The range for a good indoor climate
Page 253-258
COMPAIR® hoses
Problem-free connection
Page 259-262
Ventilation technology
Page 197-212
Flexible system solutions
remove your kitchen vapours
They should be as inconspicuous as possible. Adjust to the
variable pressure of high-performance fans in island and wallmounted hoods - and still look
good.
Ventilation technology
To fulfil all the technical air flow
and architectural demands of
modern exhaust and supply air
you have to offer a wide range
of highly flexible flat duct
systems.
COMPAIR® systems with their
specifically constructed
diameter geometry are
optimally constructed for
exhaust air routing in kitchens
with permanently low back
pressure. This is the outcome of
in-house developments and
productions which are perfectly
engineered down to the last
detail.
188/13
The advantages of exhaust air technology
in comparison to others...
The recirculating hood can be
used in areas where exhaust air
operation isn’t feasible or only
possible after expensive structural
changes. As a kitchen sales
expert, in individual kitchen
planning, you should always
mention to your clients that
recirculating hoods aren’t a good
alternative to exhaust hoods.
Stiftung Warentest's statement (test
8/2007) could be seen as an
argument for the more effective use
of exhaust hoods: "No charcoal filter can absorb cooking smells as
effectively as an exhaust duct can
extract them."
The fact that recirculating hoods
aren’t at all able to clear the
humidity in kitchen fumes is
another problem which,
with growing insulation
awareness, can over time lead to
mildew, which poses a health risk.
Ventilation technology
Recirculating air example
The focus was on harmonising the
energy efficient usage of system
parts with powerful exhaust hoods.
With the COMPAIR® range we
offer you technically sophisticated
air duct technology for individual
exhaust air solutions when
planning new constructions and
refurbishments. While developing
the products we made a point of
being in constant dialogue with
universities and research
institutions.
189/13
The advantages of exhaust air technology
in comparison to others...
Ventilation technology
Exhaust air example
Reasons for exhaust air
technology:
Everything you need to know in a
nutshell
• Smells, dampness and carbon
monoxide (gas stoves) are
almost completely diverted to the
outside.
• Due to the removal of dampness
the danger of long term health
risks (allergies etc.) due to mildew infestation are reduced and
also damage caused by
condensed water can be
avoided (i.e. swelling up of
wooden surfaces).
• Given the same construction and
volume flow, an exhaust hood
combined with a fluidic adapted
190/13
air duct/wall sleeve installation
is much less noisy than a
recirculating hood.
• The costs for the necessary
changing of the activated carbon filter in a recirculating air
system are much higher than for
the installation of an exhaust
duct including the wall sleeve
(calculation basis 15 years/
3 changes per year).
• Heat losses are minimised by the
use of a wall sleeve, like the
COMPAIR® flow Star, that only
opens when the cooker hood is
in operation. Since during recirculating air operation extra
ventilation is usually needed, the
heat losses should be comparable.
• The replacement air needed during the exhaust air operation
can get to the cooking area
through a window, door gap or
another air supply opening*.
*Secure air supply openings are always
stipulated when an exhaust hood and an
ambient air-dependent furnace are installed in dwellings. The smallest solution is
a contact switch, that automatically closes
the exhaust hood when the window is
closed. Alternatively, an electrical window
drive that is controlled by the on/off switch
of the exhaust hood can be installed. This
avoids the window staying open constantly.
System Ø 150
150
COMPAIR® flow
bion 150
The new size sets
new performance standards
Fitting example
A Deflector 90 with round
D
E
F
A
B
C
B
D
B
C
B
E
F
Flat duct pipes 150
Pipe connectors 150
Pipe bends 150
Deflectors 150
End piece 150
Flat duct sets 150
External blind 150
Wall sleeves 150
flow Star GTS 150
E-Klima A/Z 150
Roof ventilator 150
Roof hoods 150
Plug-in connector 150
Fastening clamp 150
Window contact switch
Wall connector 150
Silencers 150
Flat duct mounts 150
Round duct mounts 150
Round pipes 150
Pipe connectors
round 150
Reducer 150
Condensing water
separator 150
Duct tapes
Backpressure shutter 150
Filter
Ventilation duct casing
Page 199
Page 199
Page 199-200
Page 200-201
Page 201
Page 201
Page 202
Page 202-203
Page 204-205
Page 206
Page 206-207
Page 207
Page 207
Page 207
Page 208-209
Page 209
Page 209
Page 209
Page 210
Page 210
Page 210
Page 210
Page 210
Page 210
Page 211
Page 211
Page 212
Ventilation technology
B
C
pipe Ø 150 (F-UR 50/90)
for Ø 150 hood connection
Ventilation pipe (F-VRO 1000)
Horizontal pipe bend 90 (F-RBH 90)
Pipe connector (F-RVB)
End piece (F-EST)
Telescopic wall conduct
(K-KLIMA-R 150/150)
150
COMPAIR® flow
bion 150
F-VRO 1000
Ventilation pipe
white 1000 mm 4043001
More performance through
"conduction"
with guide vanes
high speed
flow speed (m/s)
without guide vane
white
80 mm 4043005
F-UR
Deflector
low speed
uneven flow
even flow
white
4043002
Flow speed and pressure loss in comparison of systems
with guide vanes
without guide vane
high
pressure loss
static pressure (Pa)
As a result of the patented guide
vane technology, vapour flows are
smoothed in the duct and directed to
the environment with very little loss
of pressure. Using COMPAIR® flow
150, up to 79 % less pressure is
lost, depending on the length and
structure of the waste air duct – with
a cross-sectional increase of only
2.9 %, compared with the 150
round pipe.
F-RVB
Pipe connectors
F-Bion 150
Deflector 90°
white
4043048
low
pressure loss
F-UR
Deflector with pipe
white 500 mm 4043012
white 1000 mm 4043013
Ventilation technology
Energy efficiency for extremely
powerfull hoods
Bionik deals with the research and
the systematic transfer of solutions
from nature to technical applications. For COMPAIR® bion the flow
dynamics optimal meandering
systems in watercourses formed the
natural example.
The development of the deflector
was carried out using the latest simulation and measurement technology.
Here, the focus was on the energy
efficient use of the system parts with
extremely powerfull hoods.
F-RBV
Round bend vertical
Flow detachment
No flow detachment
white
High pressure loss
F-RBH
Pipe bend horizontal
Low pressure loss
white
All COMPAIR® bion deflectors can
also be subsequently integrated into
existing systems taking the duct geometry into account.
Using the modern COMPAIR® flow
150 rectangular profile, freedom of
design is retained in kitchen planning. The external system dimensions H 89 mm x W 222 mm and
corner radiuses of 20 mm enable
you to plan inconspicuously and in
a space-saving way.
Full range for top performance
COMPAIR® flow 150 by Naber is leading air duct technology, which you can order according to your requirements
and on a consignment basis. Typical Naber: if the order
quantity is 10 pc. or more, component sets can be put
together individually according to your wishes.
4043003
F-EST
End piece
white
4043006
E-Jal flow
External blind
Strikingly unobtrusive form
198/13
4043004
Flow speed and pressure loss in systems comparison
stainless steel
222 i
89 i
4022038
Klima-E 150
Wall sleeve
with external blind
white/stainless steel
4022039
K-Klima-R 150/150
Wall sleeve
with external blind
white
brown
brick red
4044047
4044048
4044049
flow 150 (system Ø 150)
Item/
Description
Order no.
unit
COMPAIR® flow 150
– COMPAIR® flow 150, with integrated guide vane technology, is the
most advanced air duct system.
– COMPAIR® bion 150 effectively conducts the exhaust air of extremely high
performance hoods.
– COMPAIR® flow 150 reduces pressure loss, optimises volume flow
and protects the fan motor.
– COMPAIR® bion 150 minimises noise development due to
reduced pressure loss.
– COMPAIR® flow 150 is recommended by leading manufacturers of kitchen
hoods.
F-VRO 1000 system 150 flat duct
Ventilation pipe without sleeve.
— length 1000 mm
white
4043001
1
Ventilation technology
COMPAIR®
F-RVB pipe connector
For straight ventilation pipes (F-VRO 1000).
— length 80 mm
white
4043005
1
F-RBH 150 pipe bend horizontal 90°
With guide vanes and sleeves integrated on both sides.
white
4043003
1
F-RBH 150 pipe bend horizontal 15°
With sleeve integrated on one side.
white
4043007
1
199/13
COMPAIR®
Item/
Description
flow 150 (system Ø 150)
Order no.
unit
F-RBV 150 pipe bend vertical 90°
With guide vanes and sleeves integrated on both sides.
white
4043004
1
F-RBFLEX 1 system 150 pipe bend
For diversions and turns up to 180°.
Adapter, flexible, rectangular to rectangular, with integrated sleeve.
— length 240 - 600 mm
white
4043042
1
F-RBFLEX 2 system 150 pipe bend
For diversions and turns up to 180°.
Adapter, flexible, round to rectangular, with integrated sleeve.
— length 160 - 550 mm
Ventilation technology
white
4043043
1
F-Bion 150 deflector 90°
Energy efficient solution for extremely high performance hoods.
For direct hood connection with integrated sleeve.
white
4043048
1
242 98a
Ø150i
226a
295
F-UR 150 deflector 90°
For direct hood connection with guide vanes and
sleeve integrated on one side.
white
4043002
1
F-UR 150 deflector 90° with round pipe
Deflector 90° with guide vanes and round pipe.
To achieve optimum flow performance, always use the deflectors with round pipe.
Only use the deflectors with hose in exceptional cases, if no other engineering option exists (F-URX 500/F-URX 1000).
200/13
white F-UR 500 mm
4043012
1
white F-UR 900 mm
4043013
1
flow 150 (system Ø 150)
Item/
Description
Order no.
unit
F-URX 150 deflector 90° with flexi-hose
Deflector 90° with guide vanes, flexihose and 2 hose clips.
white F-URX 500 mm
4043014
1
white F-URX 1000 mm
4043015
1
F-EST 150 end piece
With integrated sleeve for direct transition from flat to round
(wall penetration).
Optimised for flow.
white
4043006
1
Flow 150 flat duct set 1
With guide vanes.
Set consisting of:
— 2000 mm flat duct pipe (4043001)
— 1 x deflector with 900 mm round pipe (4043013)
— 1 x connecting sleeve (4043005)
— 1 x end piece/transition piece (4043006)
white
4040010
1
Ventilation technology
COMPAIR®
Flow 150 flat duct set 2
With guide vanes.
Set consisting of:
— 3000 mm flat duct pipe (4043001)
— 1 x deflector with 900 mm round pipe (4043013)
— 1 x pipe bend 90°, horizontal (4043003)
— 2 x connecting sleeve (4043005)
— 1 x end piece/transition piece (4043006)
white
4040011
1
201/13
COMPAIR®
flow 150 (system Ø 150)
Item/
Description
Order no.
unit
K-Jal 150 external blind
190
190
71
190 x 190 mm, with backpressure shutter for connection to round pipes.
— Ø 150 a mm
— connector depth: 71 mm
white
4044044
1
brown
4044045
1
brick red
4044046
1
E-Jal flow 150 external blind
290 x 160 mm with backpressure shutter for connection 222 x 89 mm
to COMPAIR® flow 150.
— connector depth: 120 mm
stainless steel
4022038
1
E-Jal 150 external blind
Stainless steel external blind with backpressure shutter for connection to round
pipe.
— connector depth 145 mm
Ventilation technology
stl. st., Ø 150 a (190 x 190) mm 4022012
1
E-Jal Blow 150 external blind
Stainless steel external blind 190 x 190 mm with backpressure shutter and fly
screen for connection to round pipe.
— connector depth: 145 mm
stainless steel, Ø 150 a mm
4022019
1
Klima-E 150 wall conduct
With backpressure shutter, telescopic pipe and stainless-steel external blind.
—
—
—
—
hose/pipe connector Ø: 150 a mm
connector depth: 24 mm
installation depth: 420 — 620 mm
wall penetration: about Ø 155 mm
white/stainless-steel
4022039
1
Klima-E flow 150 wall conduct
With backpressure shutter and stainless-steel external blind.
With rectangular connector for COMPAIR® flow 150.
— pipe connector: 227 a x 94 a mm
— connector depth: 80 mm
— installation depth: 420 — 620 mm
— wall penetration Ø: about 155 mm
white/stainless-steel
202/13
4022040
1

Download Report