Released Fountain Solutions manroland web systems GmbH – Commercial Presses The list of approved media is a positive list and a living document which is updated at regular intervals. The procedure is based on a SOP and model systems are used to estimate the material compatibility. Results are based on a SOP for material resistance/corrosive potential and performed by a reference institute or self testing. The SOP’s can be downloaded at http:\\www.fogra.org Plastic Part Testing, includes an additional test with typical plastic parts used in the printing unit and rubber coverings of ink and dampening rollers. Founts which passed this test successfully are marked by a green indicator in this column. If the tests are not yet completed, the founts are marked by a yellow indicator in this column. If no plastic part test is in progress or a successful test was not submitted to our office the mentioned area in the form is not marked. After a successful introduction of the plastic part test in 01/2006 all new installed presses/orders since 01/2007 are obliged to run a fount that fulfills both, the corrosion and the plastic part criteria. In general we recommend our customers to use fountain solutions which fulfil both, the corrosion and the plastic part criteria to ensure the balance between performance and protection of the printing system. Product name manroland web systems GmbH business unit printcom.web Geschäftsfeld printcom.web fount WSH 509X approved 08/2016 fount WSH 510X approved 08/2016 Please see note below!** fount WSH 511X approved 08/2016 fount WSH 512B approved 08/2016 fount WSH 513X approved 08/2016 fount WSH 516X approved 08/2016 fount WSH 518B approved 08/2016 fount WSH 519 X approved 08/2016 solutions fount WSH 520-long run approved 08/2016 solutions fount WSH 523 approved 11/2011 solutions fount WSH 523-HW approved 11/2011 Allied Pressroom Products News Fount approved 08/2016 Allied Pressroom Products Titan Fount NWS approved 08/2016 ABC/Allied Pressroom Products (China) Ltd. Titan Fount NWS approved 08/2016 Actega Kelstar Inc. Starfount WP-1101 approved 08/2016 Agfa Graphics Prima FS 909 approved 08/2016 Anchor Pressroom Products Emerald 4350 Q7 approved 08/2016 Emerald Premium 5000 approved 08/2017 Emerald 5100 approved 08/2016 Emerald 5150 approved 08/2016 Emerald Premium 5200 approved 03/2018 Emerald Premium 5300 approved 10/2017 Emerald Premium 5300 Hard approved 10/2017 approved 09/2018 approved 09/2018 approved 08/2018 Emerald Premium 5400 Plastic Part Testing+ Manufacturer Emerald Premium 5300 + PRO RUN* Emerald Premium 5300 Hard + PRO RUN* Comment/ status Approval valid to 13.11.2014 Gebrauch,Nachdruck und Vervielfältigung dieser Zeichnung/dieses Schriftstückes nur mit Genehmigung von manroland gestattet. No part of this drwg./document may be used, reproduced or duplicated without prior permission of manroland 1-11 Released Fountain Solutions manroland web systems GmbH – Commercial Presses Product name Comment/ status Approval valid to Manufacturer 13.11.2014 Plastic Part Testing+ The list of approved media is a positive list and a living document which is updated at regular intervals. The procedure is based on a SOP and model systems are used to estimate the material compatibility. Results are based on a SOP for material resistance/corrosive potential and performed by a reference institute or self testing. The SOP’s can be downloaded at http:\\www.fogra.org Emerald Premium Hard 5400 approved 08/2018 Emerald Premium Hard 5470 approved 08/2016 Emerald Premium 5501 approved 08/2016 Emerald Premium 5510 approved 08/2016 Emerald Premium 5540 approved 08/2016 Emerald Premium Hard 5540 approved 08/2016 Emerald Premium 5560 approved 08/2016 Emerald Premium Hard 5560 approved 08/2016 Archem SRL AZ 599 Fount approved 03/2018 Atece Graphic Products b.v. Tenacid 3031 CIC approved 08/2016 TenCaCid 4250 DA-IQ approved 08/2016 Baco Chemical Services Ltd. Baco Fount W 32 i approved 08/2016 BECA Grafic S.A. Aquaheat Plus approved 10/2017 BluePrint Products NV BlueFount HC 310 approved 08/2016 BlueFount HI 351 approved 08/2016 BlueFount HI 352 approved 08/2016 BöttcherFount H-2003 approved 08/2016 BöttcherFount H-2003 4.8 approved 08/2016 BöttcherFount H-2004 approved 01/2019 BöttcherFount H-2004 4.8 approved 01/2019 BöttcherFount H-2004 S approved 01/2019 BöttcherFount H-2005 approved 11/2018 BöttcherFount H-2005 4.8 approved 11/2018 BöttcherFount H-2005 S approved 11/2018 Brenntag CEE GmbH Top-Fount HS/KR 8000 approved 08/2016 CHE. T Ltd. Chembyo Fountain Solution HF approved 08/2016 Chemtec Solutions Ltd. Velociter Fount Solution approved 08/2016 CSFI Webecol approved 08/2016 C & W Pressroom Products Safe CFM AR approved 08/2016 DC DruckChemie GmbH Wassertop 104/Plus approved 08/2016 Wassertop 104/Plus „W“ approved 08/2016 Wassertop 104/7.C approved 08/2016 Böttcher, Felix GmbH & Co. KG Gebrauch,Nachdruck und Vervielfältigung dieser Zeichnung/dieses Schriftstückes nur mit Genehmigung von manroland gestattet. No part of this drwg./document may be used, reproduced or duplicated without prior permission of manroland 2-11 Released Fountain Solutions manroland web systems GmbH – Commercial Presses Product name Comment/ status Approval valid to Manufacturer 13.11.2014 Plastic Part Testing+ The list of approved media is a positive list and a living document which is updated at regular intervals. The procedure is based on a SOP and model systems are used to estimate the material compatibility. Results are based on a SOP for material resistance/corrosive potential and performed by a reference institute or self testing. The SOP’s can be downloaded at http:\\www.fogra.org Wassertop HS/2.2 approved 08/2016 Wassertop HS 2.46 approved 08/2016 Wassertop HS 2.46 H approved 08/2016 Wassertop HS 2.47 approved 08/2016 Wassertop HS 2.48 approved 08/2016 Wassertop HS 2.48 Spezial approved 08/2016 Wassertop HS 2.49 approved 08/2016 Wassertop HS 3000 approved 09/2016 Wassertop HS 3001 approved 09/2016 Wassertop HS 3002 PS approved 10/2017 Wassertop HS 3005 approved 06/2019 Delmike Products Ltd. Alcoplus HMK approved 09/2016 Dong Guan City Henkel Printing Materials LMX-808 approved 08/2016 OCE-808 approved 08/2016 Acedin Heat 2000 approved 08/2016 Acedin Heat 2075 approved 08/2016 Acedin Heat 2085 approved 08/2016 Acedin Heat 2070 approved 08/2016 Acedin Heat 5000 approved 08/2016 Acedin Heat 5000 H approved 08/2016 Acedin Heat 5010 approved 08/2016 Acedin Heat 6100 approved 08/2016 Acedin Heat 6100 H approved 08/2016 Acedin Heat 6200 approved 08/2016 Acedin Heat 6200 H approved 08/2016 Acedin Heat 6300 approved 10/2017 Acedin Heat 6300 (Hard) approved 10/2017 approved 09/2018 DS Druckerei Service GmbH Acedin Heat 6300 + PRO RUN* Acedin Heat 6300 H + PRO RUN* Acedin Heat 6400 approved 09/2018 approved 03/2018 Acedin Heat 6405 H approved 10/2016 Gebrauch,Nachdruck und Vervielfältigung dieser Zeichnung/dieses Schriftstückes nur mit Genehmigung von manroland gestattet. No part of this drwg./document may be used, reproduced or duplicated without prior permission of manroland 3-11 Released Fountain Solutions manroland web systems GmbH – Commercial Presses Product name Comment/ status Approval valid to Manufacturer 13.11.2014 Plastic Part Testing+ The list of approved media is a positive list and a living document which is updated at regular intervals. The procedure is based on a SOP and model systems are used to estimate the material compatibility. Results are based on a SOP for material resistance/corrosive potential and performed by a reference institute or self testing. The SOP’s can be downloaded at http:\\www.fogra.org Acedin Heat 6600 approved 08/2017 Acedin Heat 6700 approved 08/2018 Acedin Heat 6700 H approved 08/2018 Acedin Sprint 405 X approved 08/2016 Acedin Web 1520 approved 08/2016 Acedin Web 1550 approved 08/2016 Acedin Web 1550 H approved 08/2016 Acedin Web 1550 L approved 08/2016 Acedin Web 1555 Q7 approved 08/2016 ECS Nottingham Ltd. Elite Jet-Star approved 08/2016 Eggen GmbH & Co. KG Alcolan Web V 78.65 approved 08/2016 Alcolan Web V 78.66 approved 08/2016 Alcolan Web V 78.66/75 approved 08/2016 Alcolan Web V 78.113 approved 10/2018 Alcolan Web V 78.475 approved 08/2016 Alcolan Web V 78.485 approved 08/2016 Oxilan WEB-LR approved 08/2016 Oxilan WEB-LR V 87.48 approved 08/2016 Arrowchem FS 2060 approved 08/2016 FS 2072 Fount approved 08/2016 Hydroweb AFS 610 Var. A approved 08/2016 Hydroweb AFS 610 Var. B approved 08/2016 Hydroweb AFS 610 Var. C approved 08/2016 AF Super Speed Fount approved 08/2016 Durafount approved 08/2016 HSF 2205 approved 10/2017 HSF 2272 approved 10/2017 Journal Fount T approved 08/2016 Journal Fount T 250 approved 08/2016 Majesta 460 approved 08/2016 Response 1560 approved 08/2016 Supreme Cert 788 approved 10/2019 Flint Group Flint Group (Varn Products) Gebrauch,Nachdruck und Vervielfältigung dieser Zeichnung/dieses Schriftstückes nur mit Genehmigung von manroland gestattet. No part of this drwg./document may be used, reproduced or duplicated without prior permission of manroland 4-11 Released Fountain Solutions manroland web systems GmbH – Commercial Presses Product name Comment/ status Varn CSF 9184 approved 08/2019 Varn Elite Fount approved 08/2016 Varn Elite Fount 250 approved 08/2016 Varn HSF 2218 approved 08/2016 Varn HSF 7262 approved 08/2016 Varn HSF 9133 approved 10/2018 Varn HSF 9133 (250) approved 10/2018 Varn HSF 9144 approved 08/2016 Varn HSF 9146 approved 07/2019 Varn HSF 9146 (250) approved 07/2019 Varn HSF 9165 approved 07/2019 Varn HSF 9168 approved 07/2019 Varn Hydro Fount approved 08/2016 Varn Hydro Fount 250 approved 08/2016 Graphokem S.p.A. Fontex HQ 20 approved 08/2016 Guardian Chemicals Infc. Paragon 517 approved 08/2016 Varyx 517 approved 08/2016 H&H Graphic Supplies Ltd. HFO4102 Heatset Fount approved 08/2016 Hausleiter Druckhilfsmittel GmbH & Co. KG Hacodamp 713 approved 10/2018 Hacodamp 748 approved 08/2016 Hacodamp 756 approved 08/2016 Heidelberg Canada Saphira FS-1020 a approved 08/2016 Huber GmbH Hydrolith HS-NA approved 08/2016 hubergroup Hydrofix N approved 08/2016 Hydrofix N 10 V 9100 09 approved 08/2016 Hydrofix-XS 8198 09 approved 08/2016 Hydrofix-XS 8198 19 approved 08/2016 Hydrofix-XS 8198 29 approved 08/2016 Hydrofix-XS 8198 79 approved 08/2016 Redufix AF 02VP 1891 09 approved 08/2016 Redufix AF 02VP 1891 19 approved 08/2016 Redufix AF 02VP 1891 29 approved 08/2016 Plastic Part Testing+ Manufacturer 13.11.2014 Approval valid to The list of approved media is a positive list and a living document which is updated at regular intervals. The procedure is based on a SOP and model systems are used to estimate the material compatibility. Results are based on a SOP for material resistance/corrosive potential and performed by a reference institute or self testing. The SOP’s can be downloaded at http:\\www.fogra.org Gebrauch,Nachdruck und Vervielfältigung dieser Zeichnung/dieses Schriftstückes nur mit Genehmigung von manroland gestattet. No part of this drwg./document may be used, reproduced or duplicated without prior permission of manroland 5-11 Released Fountain Solutions manroland web systems GmbH – Commercial Presses Product name Comment/ status Approval valid to Manufacturer 13.11.2014 Plastic Part Testing+ The list of approved media is a positive list and a living document which is updated at regular intervals. The procedure is based on a SOP and model systems are used to estimate the material compatibility. Results are based on a SOP for material resistance/corrosive potential and performed by a reference institute or self testing. The SOP’s can be downloaded at http:\\www.fogra.org Redufix-R 832529 approved 08/2016 Redufix AF 8400 approved 08/2016 Redufix AF 8400 09 approved 08/2016 Redufix AF 8400 19 approved 08/2016 Redufix AF 8400 29 approved 08/2016 Redufix AF 8450 09 approved 08/2016 Redufix AF 8450 19 approved 08/2016 Redufix AF 8450 29 approved 08/2016 Redufix R 8420 09 approved 08/2016 Redufix R 8420 19 approved 08/2016 Redufix R 8420 29 approved 08/2016 Redufix RP 8425 09 approved 08/2016 Redufix RP 8425 19 approved 08/2016 Redufix RP 8425 29 approved 08/2016 Graph Fount 6000 approved 08/2016 Rotoplus 7000 approved 08/2016 Intec Fabricaciones S.A. Sinal pHE approved 07/2018 JSC NPF Technohim, Moskau Akvanano HS approved 08/2016 MGF a division of MecGraf S.r.l. HMR-23 approved 08/2016 HMR-26 approved 08/2016 New Waterline AG Qualifount HS approved 11/2016 Openshaw Group Spectrum Fount 3220 approved 08/2016 PCO Europe B. V. Dynacol AC 310 approved 08/2016 Dyna Col AC 310 H approved 08/2016 Dynacol AC 310 S approved 08/2016 Dyna Col AC 320 approved 08/2016 Dyna Col AC 320 H approved 08/2016 Dyna Col AC 320 S approved 08/2016 Dyna Col AC 330 LC approved 08/2016 Dyna Col AC 330 LC-H approved 08/2016 Dyna Col AC 330 LC-S approved 08/2016 Dynafount 498 CI approved 08/2016 IMAF S.p.A. Gebrauch,Nachdruck und Vervielfältigung dieser Zeichnung/dieses Schriftstückes nur mit Genehmigung von manroland gestattet. No part of this drwg./document may be used, reproduced or duplicated without prior permission of manroland 6-11 Released Fountain Solutions manroland web systems GmbH – Commercial Presses PressMax Pressroom Solutions Inc. Product name Comment/ status Approval valid to Manufacturer 13.11.2014 Plastic Part Testing+ The list of approved media is a positive list and a living document which is updated at regular intervals. The procedure is based on a SOP and model systems are used to estimate the material compatibility. Results are based on a SOP for material resistance/corrosive potential and performed by a reference institute or self testing. The SOP’s can be downloaded at http:\\www.fogra.org Winfount HSAR1-C approved 08/2016 Winfount HSCI approved 08/2016 WinSprint 2010-C approved 08/2016 WinSprint 2010-C H approved 08/2016 WinSprint 2010-C S approved 08/2016 WinSprint 2020-C approved 08/2016 WinSprint 2020-C H approved 08/2016 WinSprint 2020-C S approved 08/2016 WinSprint 2030 LC approved 08/2016 WinSprint 2030 LC-H approved 08/2016 WinSprint 2030 LC-S approved 08/2016 FountMax Green 10.50 Q7 approved 08/2016 FountMax Red 20.10 AF approved 08/2016 FountMax Red 20.20 AF approved 08/2016 FountMax Red 20.21 AF approved 08/2016 FountMax Red 20.25 approved 08/2016 FountMax Red 20.30 AF approved 08/2016 FountMax Red 20.40 approved 08/2016 FountMax Red 20.60 AF approved 08/2017 FountMax Red 20.70 AF approved 10/2017 FountMax Red 20.70 AF + PRO RUN* approved 09/2018 FountMax Red 20.90 AF approved 03/2018 FountMax Red 20.95 approved 08/2018 FountMax Red 22.70 AF (Hard) approved 10/2017 FountMax Red 22.70 AF (Hard) + PRO RUN* approved 09/2018 FountMax Red 21.65 AF approved 08/2016 FountMax Red 22.10 AF approved 08/2016 FountMax Red 22.21 AF approved 08/2016 FountMax Red 22.30 AF approved 08/2016 FountMax Red 22.95 approved 08/2013 Platinum Plus 1678 approved 08/2016 Gebrauch,Nachdruck und Vervielfältigung dieser Zeichnung/dieses Schriftstückes nur mit Genehmigung von manroland gestattet. No part of this drwg./document may be used, reproduced or duplicated without prior permission of manroland 7-11 Released Fountain Solutions manroland web systems GmbH – Commercial Presses Product name Comment/ status Approval valid to Manufacturer 13.11.2014 Plastic Part Testing+ The list of approved media is a positive list and a living document which is updated at regular intervals. The procedure is based on a SOP and model systems are used to estimate the material compatibility. Results are based on a SOP for material resistance/corrosive potential and performed by a reference institute or self testing. The SOP’s can be downloaded at http:\\www.fogra.org Platinum Plus 1679 approved 08/2016 Printchem Ltd. PC610 PC Green Fount approved 08/2016 Print-Chemie GmbH FountS approved 09/2019 Printer´s Service (Prisco) Prisco Fountain Concentrate 205-40 approved 08/2017 Webfount 115 E approved 08/2016 Webfount 225 E approved 08/2016 Webfount 230 E approved 08/2016 Webfount 560 E approved 08/2016 Rycoline Products Inc. International Series 588 Fountain Solution approved 08/2016 Samor Italia S.r.l. Fount Web 200 approved 08/2016 Shijiazhuang Taihang Technological and Industrial Co. TH-808 approved 08/2016 Schwegmann, Bernd Schwego Soft 2200 approved 08/2016 Schwego Soft 2201 approved 08/2016 Schwego Soft 3000 AB approved 09/2019 Schwego Soft 3000 AB ED5677 approved 04/2019 Schwego Soft 3000 AN approved 09/2019 Schwego Soft 3000 AW approved 09/2019 Schwego Soft 3000 AW ED5672 approved 04/2019 Schwego Soft 3000 AYB approved 08/2016 Schwego Soft 3000 AYH approved 08/2016 Schwego Soft 3000 AYN approved 08/2016 Schwego Soft 3000 AYW approved 08/2016 Schwego Soft 3000 AYW ED5619 approved 08/2017 Soft 3000 AYW ED 5625 approved 08/2017 Soft 3000 AYW ED 5626 approved 08/2017 Equile 50-060721-3 approved 08/2016 Equile Solo 50-060724-7 approved 08/2016 Equile Solo 50-060725-4 approved 08/2016 Equile Solo 50-060726-2 approved 08/2016 Equile Solo 50-060729-6 approved 08/2016 Siegwerk Druckfarben AG Co. KGaA Gebrauch,Nachdruck und Vervielfältigung dieser Zeichnung/dieses Schriftstückes nur mit Genehmigung von manroland gestattet. No part of this drwg./document may be used, reproduced or duplicated without prior permission of manroland 8-11 Released Fountain Solutions manroland web systems GmbH – Commercial Presses Product name Comment/ status Approval valid to Manufacturer 13.11.2014 Plastic Part Testing+ The list of approved media is a positive list and a living document which is updated at regular intervals. The procedure is based on a SOP and model systems are used to estimate the material compatibility. Results are based on a SOP for material resistance/corrosive potential and performed by a reference institute or self testing. The SOP’s can be downloaded at http:\\www.fogra.org Equile Solo 51-060310-3 approved 08/2016 Equile Solo 51-060320-2 approved 08/2016 Equile Solo 51-060330-1 approved 08/2016 Equile Solo H 51-060311-1 approved 08/2016 Equile Solo H 51-060321-0 approved 08/2016 Equile Solo H 51-060331-9 approved 08/2016 Soha Chemicals Continental FSH 38 Ci approved 08/2016 Solco Offsetproducts Dampstar 1.5 approved 08/2016 Dampstar 1.53 Soft approved 08/2016 Dampstar 1.6 Q7 approved 08/2016 Dampstar 2.4 Ci approved 08/2016 Dampstar 2.5 approved 08/2016 Dampstar 2.9 approved 08/2016 Dampstar 7.10 approved 08/2017 Dampstar 7.20 approved 03/2018 Dampstar 7.21 approved 08/2016 Dampstar 7.30 approved 10/2017 Dampstar 7.30 Hard approved 10/2017 Dampstar 7.30 + PRO RUN* Dampstar 7.30 Hard + PRO RUN* approved 09/2018 approved 09/2018 Dampstar 7.35 approved 08/2018 Dampstar 7.35 Hard approved 08/2018 Dampstar 7.55 approved 08/2016 Dampstar 7.6 approved 08/2016 Dampstar 7.6 Hard approved 08/2016 Dampstar 7.81 approved 08/2016 Dampstar 7.82 approved 08/2016 Dampstar 7.82 Hard approved 08/2016 Dampstar 7.83 approved 08/2016 Dampstar 7.83 Hard approved 08/2016 Dampstar 7.9 approved 08/2016 Alco down Rollenoffset approved 08/2016 Wolfgang Spielberger e.K. Gebrauch,Nachdruck und Vervielfältigung dieser Zeichnung/dieses Schriftstückes nur mit Genehmigung von manroland gestattet. No part of this drwg./document may be used, reproduced or duplicated without prior permission of manroland 9-11 Released Fountain Solutions manroland web systems GmbH – Commercial Presses Product name IPA-reduziert R23 Alco down Rollenoffset IPA-reduziert R23 S Alco down Rollenoffset IPA-frei R45 Alco down Rollenoffset IPA-frei R45 S Alco down Rollenoffset IPA-frei R46 Alco down Rollenoffset IPA-frei R46 S Alco down Rollenoffset IPA-frei R47 Alco down Rollenoffset IPA-frei R47 S Alco down Rollenoffset IPA-frei R48 Alco down Rollenoffset IPA-frei R48 S Comment/ status Approval valid to Manufacturer 13.11.2014 Plastic Part Testing+ The list of approved media is a positive list and a living document which is updated at regular intervals. The procedure is based on a SOP and model systems are used to estimate the material compatibility. Results are based on a SOP for material resistance/corrosive potential and performed by a reference institute or self testing. The SOP’s can be downloaded at http:\\www.fogra.org approved 08/2016 approved 08/2016 approved 08/2016 approved 08/2016 approved 08/2016 approved 08/2016 approved 08/2016 approved 08/2016 approved 08/2016 Alco down Superdot R60 approved 08/2016 Alco down Superdot R60 S approved 08/2016 approved 08/2016 approved 08/2016 Alco-down Rollenoffset IPA-frei R200 Alco-down Rollenoffset IPA-frei RS200 Sun Chemical NV Sunfount 430 approved 08/2016 Sun Chemical Eurolab SunFount 6239 LV 7010 approved 08/2017 SunFount 6339 approved 08/2016 SunFount 6339 VE approved 08/2016 SunFount Classic HV approved 08/2016 SunFount Universal HV approved 08/2016 Sunfount HS 405 approved 08/2016 Sunfount HS 430 approved 08/2016 Sunfount HS 432 approved 08/2016 Sunfount HS 435 approved 08/2016 Sunfount 1550 approved 08/2016 Sunfount 2213 approved 08/2016 Concept Fount approved 08/2016 Sun Chemical Ltd. Tewtrell Ltd. Graphic House Gebrauch,Nachdruck und Vervielfältigung dieser Zeichnung/dieses Schriftstückes nur mit Genehmigung von manroland gestattet. No part of this drwg./document may be used, reproduced or duplicated without prior permission of manroland 10-11 Released Fountain Solutions manroland web systems GmbH – Commercial Presses TPE Corporation (Hong Kong) Ltd Ultrachem Ltd. Vegra GmbH Product name Comment/ status Approval valid to Manufacturer 13.11.2014 Plastic Part Testing+ The list of approved media is a positive list and a living document which is updated at regular intervals. The procedure is based on a SOP and model systems are used to estimate the material compatibility. Results are based on a SOP for material resistance/corrosive potential and performed by a reference institute or self testing. The SOP’s can be downloaded at http:\\www.fogra.org Prema Fount approved 08/2016 Winstar HF 2.0 approved 08/2016 Winstar HF 2.9 approved 08/2016 Primafount AF 2 approved 08/2016 Spectrum 2270 approved 08/2016 approved 08/2016 approved 08/2016 approved 08/2016 approved 08/2016 approved 08/2016 Alco Damp Rot 3232/900 N approved 09/2016 Easyrot 3000 Zi (E-941) approved 08/2016 Superkonzentrat Rot E-850/867 Zi approved 08/2016 Alco Damp Rot 3232/868 Zi dH N Alco Damp Rot 3232/869 Zi dH N Alco Damp Rot 3232/870 Zi dH N Alco Damp Rot 3232/877 Zi dH N Alco Damp Rot 3232/881 Zi dH N * Freigabe nur als Produktkombination, es dürfen max. 2 % PRO RUN enthalten sein. Es muss eine eigene Dosiervorrichtung für das Additiv vorhanden sein. * Approval only granted for combination of fount and a maximum of 2 % PRO RUN, which requires a separate doser. ** Bitte beachten Sie: Die gelisteten Produkte sind nur in den Vertriebsregionen der mrws-Marktorganisationen und -Vertriebsund -Service-Partner erhältlich! Für nähere Informationen wenden Sie sich bitte an Ihren örtlichen Ansprechpartner. ** Please note: The products listed are only available within the distribution areas of mrws’ market organisations and sales and service partners! For more detailed information, please contact your local mrws representative. Gebrauch,Nachdruck und Vervielfältigung dieser Zeichnung/dieses Schriftstückes nur mit Genehmigung von manroland gestattet. No part of this drwg./document may be used, reproduced or duplicated without prior permission of manroland 11-11
© Copyright 2024 ExpyDoc
