Installation Guide 157R9902 157R9902 Normally closed solenoid valve Type PVC T← Week code ↑ P WWYY 1 2 Tekniske data Technical data Technische Daten Caractéristiques Techniques Position Repérage 1 2 Nøglevidde Across flats Schlüsselweite Surplats 17 mm (0.67 in) 13 mm (0.51 in) Max. tilspændingsmoment Max. tightening torque Max. Anzugsmoment Couple de serrage maxi 23 Nm [203] lbf·in] 5 Nm [44 lbf·in] Arbejdstrykområde over tanktryk Operation pressure range over tank pressure 6 - 13.5 bar Arbeitsdruckbereich über dem Tankdruck [87 - 196 psi] Plage de pression de travail ou - dessus de la pression T Max tank tryk, statisk/dynamisk Max tank pressure, static / dynamic 25 bar / 40 bar Max. Tand Druck, statisch/dynamisch [362 psi / 580 psi] Pression maxi sur orifice T, statique/dynamique Max. overfladetemperatur for spole Max. coil surface temperature 155°C [311°F] Max. Temperatur der Spulenoberfläche Température maxi surface de bobine Nominel spænding Rated voltage 24 V 12 V Nennspannung Tension nominale Inlet voltage fluctuations must not exceed ±10% of nominal voltage to obtain correct operation and long life coils. © Danfoss A/S, 2014-04 520L0572 • Rev BD • Apr 2014 1 Tekniske data Technical data Technische Daten Caractéristiques Techniques Strømforbrug Current consumption Strohmaufnahme Intensité nominale Effektforbrug Power consumption Leistungsaufnahme Puissance absorbée Olieviskositet Oil Viscosity Ölviskositet Viscosité de l’huile Filtrering Filtering Filtrierung Filtrage Ved 22°C spoletemperatur 22°C coil temperature bei 22°C Spulentemperatur Temp. bobine à 22°C Ved 110°C spoletemperatur 110°C coil temperature bei 110°C Spulentemperatur Temp. bobine à 110°C Ved 22°C spoletemperatur 22°C coil temperature bei 22°C Spulentemperatur Temp. bobine à 22°C Ved 110°C spoletemperatur 110°C coil temperature bei 110°C Spulentemperatur Temp. bobine à 110°C 12V 24V 0.36 A 0.18 A 0.27 A 0.14 A 4.33 W 4.40 W 3.22 W 3.27 W Range: 12 - 75 mm2/s [66 - 350 SUS] Min.: 4 mm2/s [40 SUS] Max.: 460 mm2/s [2130 SUS] Omgivelsestemperatur Ambient temperature Umgebungstemperatur Température ambiante Min.: -30°C [-22°F] Max.: 60°C [140°F] Max. degree of contamination (ISO 4406): 19/16 Olietemperatur Oil temperature Öltemperatur Température de l’huile Range: 30 - 60°C [86 - 140°F] Min: -30°C [-22°F] Max: 90°C [194°F] Tilslutning Connection Anschluß Raccordement 1 2 Spolen har indbygget beskyttelsesdiode. Det 2 -polede stik kan forbindes vilkårligt. The coil has built-in protection diode. The 2 pole connector can be conneted arbitrary. 3 4 Die Spule hat eingebaute Schutzdiode. Der 2-Polige Stecker kan willkürlich verbunden werden La bobine ayant une diode de protection, la prise mâle à 2 pôles peut être branchée arbitrairement Pos. 1 2 3 4 Description Wire sealing for wire diameter 2.2 - 3.0mm [0.09 - 0.12 in] Wire sealing for wire diameter 1.2 - 2.1mm [0.05 - 0.08 in] JPT contact (loose piece) JPT contact (strip) Housing Seal QTY. 2 2 1 1 AMP code No. 828904-1 828905-1 929930-1 927770-1 1-967239-1 0-963209-1 NB: To be ordered by AMP AMP crimp tool incl. crimp insert for JPT-contact 157B4989 NB: Can be ordered by Danfoss PVC, order number PVC Normally closed solenoid valve 12 V 157B4282 2 520L0572 • Rev BD • Apr 2014 24 V 157B4284 © Danfoss A/S, 2014-04
© Copyright 2024 ExpyDoc
