Eco-RCE™ Eco-RCE™/F Eco-RCE™/M RAPID CURE EPOXIES • REDUCE DOWNTIME – Eco-RCE, RCE/F and RCE/M feature faster cure times for a faster return to business operation • PRIME AND BUILD FLOORS – Use as a concrete primer or build coat to level floors • EASY TO USE – Self-leveling formulas enable easy application for higher profile and mechanically prepared floors Part of the Family: Low Odor No noxious fumes; will not contaminate odor-sensitive inventory. Environmentally Friendly Reduced solvent means less evaporation and less waste. User Friendly Can be applied during normal business hours—no shutdown required. VOC Compliant Meets the Environmental Protection Agency VOC regulations. TENNANT COATINGS For First Impressions That Last™ Eco-RCE, RCE/F, RCE/M Snapshot COLOR: RCE, RCE/F, RCE/M – clear, Tennant 100 Series Colorants, or full broadcast decorative flake or quartz into membrane. VOC COMPLIANCE: < 2 g/L. WALK-ON TIME: RCE, RCE/F: 4 hours under normal circumstances. RCE/M: 5 hours under normal circumstances. APPLICATIONS: Multi-purpose primer and build coat. INSTALLATION: Professional application recommended; special equipment required. RCE, RCE/F are contractor-only product offerings. Physical/Performance Properties MATERIAL PROPERTIES (LIQUID) RCE, RCE/F Results RCE/M Results ASTM D3278 Part A: >200 (93) Part B: >200 (93) Part A: >200 (93) Part B: >200 (93) Percent Solids, by weight ASTM D2369 Part A: 99.9 Part B: 99.9 Part A: 99.9 Part B: 99.8 Density, lb/gal (kg/L) ASTM D1475 A/B (RCE): 9.04 (1.09) A/B (RCE/F): 9.06 (1.09) A/B: 9.10 (1.09) Viscosity, cps Brookfield ASTM D2196 Part A: 250-650 Part B: 100-450 A/B: 250-450 Part A: 700-1000 Part B: 350-550 A/B: 500-700 Volatile Organic Compound (VOC) lb/gal (g/L) ASTM D3960 Mixed A+B: 0.01 (0.82) Mixed A+B: 0.01 (1.15) Property Test Method Flash Point, °F (°C) Seta Closed Cup CURED COATING PROPERTIES (DRY FILM) Property Test Method RCE, RCE/F Results RCE/M Results Abrasion Resistance, mg loss Taber Abraser ASTM D4060* NA 83.1* Compressive Strength, psi (kPa) ASTM D695 NA 13,500 (93,150) Tensile Strength, psi (kPa) ASTM D2370 5,200 (35,880) 7,000 (48,300) Percent Elongation ASTM D2370 4 5 Coefficient of Friction (COF)** ASTM D2047 NA 0.5** Shore D Hardness ASTM D2240 80-85 @ 0 sec 75-80 @ 15 sec 80-85 @ 0 sec 75-80 @ 15 sec RCE, RCE/F Results RCE/M Results Coverage Rate Range, ft2/gal 80-535 53-535 Application Thickness, wet/dry mils 3-30 3-30 APPLICATION CHARACTERISTICS Property Test Method *CS-17 Taber Abrasion Wheel, 1,000 gram load, 1,000 revolutions. **After cleaning floor with auto scrubber. Results are based on conditions at 77°F, 50% relative humidity. Tennant P.O. Box 1452 Minneapolis,MN U.S.A.55440 800-553-8033 In Quebec call: 514.335.6061 Fax: 763.540.1437 www.tennantco.com [email protected] A system of high-performing Tennant coatings, sweepers, and scrubbers will maximize your floor's natural life, minimize your maintenance costs and create a world-class impression. 1250-63 Eco-RCE, RCE/F, RCE/M 7/08 ©2008 Tennant and Nobles are registered trademarks of Tennant Company, whose products are sold and serviced through Tennant Sales & Service Company.
© Copyright 2025 ExpyDoc
