standards electrical • ETL (US/Canada) wet location rated luminaires • IP65 rated. • ADA compliant. • ARRA Buy American compliant. • LM-79 and LM-80 compliant. • Philips Luxeon ES White LEDs, 34 input Watts with 4000K color temperature provide up to 1350 lumens in total lumen output. • Standard Class 2 compliant electronic LED driver, 120-277V, with operating temperature of -20°C to 50°C. • Dimming 0-10V LED driver is optional. • High efficiency LEDs have a 50,000 hour rated life. construction/finish • Marine grade die cast housing. installation • One piece die cast aluminum guards. • Luminaire may be ceiling or wall mounted. • Guards are available in six styles: Open, Cross, Eyelid, Grid, Tri (3 spoke) and Hex (6 spoke). • Four point mounting must be used for maximum vandal resistance. • Housing finish is textured polyester powder coat. • Guards and housing are available in five finishes: White, Dark Bronze, Black, Natural Aluminum, and Gray. Custom colors are also available (specify RAL number). • Stainless steel TORX® T15 pin-in-head tamperproof screws securely attach the guard to the housing. Each screw is provided with a nylon captured washer to prevent the screw from coming loose from the guard. • The mid-height casting is provided with three - 1/2" threaded conduit entries. VRD-2130 Decorative Vigil II Series 13" Decorative Round Luminaire LED 34W surface mount lens Specifier’s Reference • UV-stabilized, polycarbonate injection molded lens, 0.125" minimum thickness. • Lens is translucent white with radial prisms to provide superior illumination. • An extruded lens and foam backplate gasket is factory installed to cushion against shock. This also provides a seal against moisture, dirt and insects from entering the luminaire. Project Type Model No. Comments Green Choice: VR2LED40K-DO-BK VR2LED 40K – Family – Guard VR2LED – Vigil II Vandal Round LED Surface Mount Accessories T15TPTOOL – TORX® T15 Pin-in-head Screwdriver ZI100S – Mini-Inverter system, 100W, to power 2 units in emergency operation ZI250S – Min-Inverter system, 250W, to power up to 5 units in emergency operation (For more information on the Mini-Inverter Systems, consult Philips Chloride specification sheet CP-60150.) © 2013 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Options DO – Open DC – Cross DE – Eyelid DG – Grid DT – Tri (3 spoke) DH – Hex (6 spoke) Finish Color Temp. 40K – 4000K LED VRD-2130_K 05/13 – BLANK – Dark Bronze BK – Black WT – White NP – Natural Aluminum GY – Gray CC – Custom RAL Color DIM – 0-10V Dimming PE – Photo Control (must specify voltage) VRD-2130 Vigil II 13" Decorative Round Luminaire LED 34W semi-recessed mount guard options DO - Open Guard DT - Tri Guard DG - Grid Guard DH - Hex Guard DC - Cross Guard DE - Eyelid Guard dimensions 7.07" (179.6mm) 13.75" (349.3mm) 0.88" K.O. (22.4mm) TOP 7.07" (179.6mm) 12" (304.8mm) LEVEL A 13.81" (350.7mm) Round Open Guard A – 6.03" (153.2mm) Round Cross or Eyelid Guard A – 6.40" (162.6mm) photometry Catalog No. VR2LED40K-DO Additional Test Numbers Test No. 29474D1 Lamp LED Wattage 34W Description/Catalog Number VR2LED40K-DE VR2LED40K-DG Lumens 1358 Test Number 29473 29254D1 90: 0: f29474 © 2013 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires VRD-2130_K 05/13 Philips Lighting Company 200 Franklin Square Drive Somerset, NJ 08873 Phone: 855-486-2216 Philips Lighting Company 281 Hillmount Road Markham ON, Canada L6C 2S3 Phone: 800-668-9008