pre-setting heavy duty anchors Steel anchors with ETA option 7 (CE marking) for non-cracked concrete Non-cracked concrete Natural stone Solid brick Products group TOP [*] no accessories TOP BU [*] with 8.8 hexagonal head screw TOP BP [*] through-setting with 8.8 hexagonal head screw and spacer TOP BD with stud To fix • Steel structures • Windows and door frames • Railings and balustrades •Gates •Façades •Machineries • Iron bars Suitable for • Non-cracked concrete • Natural stone • Solid brick [*] European Technical Approval Option 7 for non-cracked concrete Option 7 for non-cracked concrete TOP OS with eyebolt Software Vorpa Calcul Anchor TOP OP with eyebolt and spacer TOP GS with hook-bolt Examples of applications TOP TS through-setting with 10.9 countersunk head screw TOP DC through-setting with blind nut TOP INOX A2 (A2 Stainless Steel) TOP INOX A4 [*] (A4 Stainless Steel) no accessories TOP INOX A2 BU (A2 Stainless Steel) TOP INOX A4 BU [*] (A4 Stainless Steel) with hexagonal head screw TOP OS INOX A2 (A2 Stainless Steel) with eyebolt TOP GS INOX A2 (A2 Stainless Steel) with hook-bolt TOP INOX A2 BD (A2 Stainless Steel) with threaded stud TOP SA - SA A4 Version 05-2014 HEAVY DUTY ANCHORS Vorpa TOP HEAVY DUTY ANCHORS pre-setting heavy duty anchors Vorpa TOP Steel anchors with ETA option 7 (CE marking) for non-cracked concrete Non-cracked concrete Natural stone Solid brick Product information Characteristics • Torque controlled expansion anchor made of galvanized steel or stainless steel composed of anti-rotation cold formed body, expansion conical nut and accessory. • When the bolt or hexagon nut is tightened, the cone is pulled into the expansion sleeve and expands it against the hole wall. Benefits • Wide range of accessories • Anti-rotation during the installation procedure • Suitable for all bolts or studs with metric thread • Fixing can be casily driven in, therefore less installation effort • Surface-flush fixing allows the mounted item to be removed and refitted several times • Anchor version with internal thread for high flexibility by using threaded rods or screws of different lengths and type Benefits • Three-part expansion sleeve allows even load distribution and small edge and axial spacing. Installation • Pre-setting anchor • Through-setting only in the version TOP BP and TOP TS Suggestion for use • Choose the most suitable accessory in relation to the application to carry out • Choose the right size of the anchor according to the load • Always check load bearing capacity values in the table • Respect the installation data • Clean the hole before the installation Installation sequence Pre-setting anchor TOP Through-setting anchor TOP Technical data TOP no accessories Code 710 711 712 713 Description Lt mm for screws Ø mm d0 mm h1 mm TOP6 TOP8 TOP10 TOP12 45 51 60 75 M6 M8 M10 M12 10 12 14 18 55 60 70 85 Screw length calculation: Lv = Lt + tfix h1 =Min. hole depth Lt =Anchor length Lv =Screw length d0 =Hole diameter d =Screw diameter tfix =Fixture thickness tinst =Torque Ch =Spanner Lb =Stud length L0 =Eyebolt length Lg =Hook-bolt length pre-setting heavy duty anchors Steel anchors with ETA option 7 (CE marking) for non-cracked concrete Non-cracked concrete Natural stone Technical data TOP BU with 8.8 hexagonal head screw Code 720 721 722 723 Description Lt mm for screws d x Lv mm d0 mm h1 mm Tfix max mm Tinst Nm Ch TOP 6 BU TOP 8 BU TOP 10 BU TOP 12 BU 45 51 60 75 M6x55 M8x65 M10x80 M12x100 10 12 14 18 55 60 70 85 10 14 20 25 10 25 40 75 10 13 17 19 Screw length calculation: Lv = Lt + tfix h1 =Min. hole depth Lt =Anchor length Lv =Screw length d0 =Hole diameter d =Screw diameter tfix =Fixture thickness tinst =Torque Ch =Spanner Lb =Stud length L0 =Eyebolt length Lg =Hook-bolt length TOP BP through-setting with 8.8 hexagonal head screew and spacer Code 2720 2721 2722 2723 Description Lt mm for screws d x Lv mm d0 mm h1 mm Tfix max mm Tinst Nm Ch TOP 6 BP TOP 8 BP TOP 10 BP TOP 12 BP 45 51 60 75 M6x80 M8x90 M10x100 M12x120 10 12 14 18 55 60 70 85 30 35 38 43 10 25 40 75 10 13 17 19 TOP BD with stud Code 705 706 707 708 Description Lt mm for screws d x Lb mm d0 mm h1 mm Tfix max mm Tinst Nm Ch TOP6BD 57 TOP8BD 75 TOP10 BD 90 TOP12 BD110 45 51 60 75 M6x57 M8x75 M10x90 M12x110 10 12 14 18 55 60 70 85 10 10 20 25 6 15 30 50 10 13 17 19 TOP OS with eyebolt Code 795 796 797 798 Description Lt mm for screws d x L0 mm d0 mm h1 mm Tinst Nm Ø TOP6OS TOP8OS TOP10 OS TOP12 OS 45 51 60 75 M6x55 M8x60 M10x73 M12x90 10 12 14 18 55 60 70 85 5 12 20 35 10±0,5 11,8±0,5 14,5±0,5 17±0,5 Solid brick HEAVY DUTY ANCHORS Vorpa TOP HEAVY DUTY ANCHORS pre-setting heavy duty anchors Vorpa TOP Steel anchors with ETA option 7 (CE marking) for non-cracked concrete Non-cracked concrete Technical data TOP OP through-setting with spacer and eyebolt Code Description 2572 TOP 10 OP Lt mm eyebolt d x L0 mm d0 mm h1 mm Tinst Nm Ø 60 M10x100 14 90 20 14,5 TOP GS with hook-bolt Code 775 776 777 778 Description Lt mm hook bolt d x Lg mm d0 mm h1 mm Tinst Nm P TOP6GS TOP8GS TOP10 GS TOP12 GS 45 51 60 75 M6x55 M8x60 M10x73 M12x90 10 12 14 18 55 60 70 85 5 12 20 35 8±0,5 10±0,5 12,5±0,5 16±0,5 TOP TS through-setting with 10.9 countersunk head screw Code Description Lt mm screws d x Lv mm d0 mm h1 mm Tfix mm Tinst Nm Ch 11864 11866 11868 11870 TOP TOP TOP TOP 45 51 60 75 M6x80 M8x90 M10x100 M12x110 10 12 14 18 55 60 75 85 32 40 40 46 10 25 40 75 4 5 6 8 6 TS 8 TS 10 TS 12 TS TOP DC through-setting with blind nut Code 5720 5721 5722 5723 Description Lt mm screws d x Lv mm d0 mm h1 mm Tfix mm Tinst Nm Ch TOP 6 DC TOP 8 DC TOP 10 DC TOP 12 DC 45 51 60 75 M6x85 M8x102 M10x110 M12x135 10 12 14 18 55 60 75 85 32 40 40 46 10 25 40 75 4 5 6 8 TOP INOX A2 (A2 Stainless Steel) no accessories Code 714 715 716 717 Description Lt mm screws Ø mm d0 mm h1 mm TOP INOX A2 6 TOP INOX A2 8 TOP INOX A2 10 TOP INOX A2 12 45 51 60 75 M6 M8 M10 M12 10 12 14 18 55 60 75 85 10 12 14 18 55 60 75 85 TOP INOX A4 (A4 Stainless Steel) no accessories 3714 3715 3716 3737 TOP INOX A4 6 TOP INOX A4 8 TOP INOX A4 10 TOP INOX A4 12 45 51 60 75 M6 M8 M10 M12 Natural stone Solid brick pre-setting heavy duty anchors Steel anchors with ETA option 7 (CE marking) for non-cracked concrete Non-cracked concrete Natural stone Technical data TOP INOX A2 BU with hexagonal head screw (A2 Stainless Steel) Code 717 718 719 727 Description Lt mm screws d x Lv mm d0 mm h1 mm Tfix max mm Tinst Nm Ch TOP INOX A2 6 BU TOP INOX A2 8 BU TOP INOX A210 BU TOP INOX A212 BU 45 51 60 75 M6x55 M8x65 M10x80 M12x100 10 12 14 18 55 60 70 85 10 14 20 25 10 25 40 75 10 13 17 19 TOP INOX A4 BU with hexagonal head screw (A4 Stainless Steel) 3717 3718 3719 3720 TOP INOX A4 6 BU TOP INOX A4 8 BU TOP INOX A410 BU TOP INOX A412 BU 45 51 60 75 M6x55 M8x65 M10x80 M12x100 10 12 14 18 55 60 70 85 10 14 20 25 10 25 40 75 10 13 17 19 TOP INOX A2 GS with hook-bolt (A2 Stainless Steel) Code 3775 3776 3777 3778 Description Lt mm hook-bolt d x Lg mm d0 mm h1 mm Tinst Nm P T OP INOX A2 6 GS TOP INOX A2 8 GS TOP INOX A210 GS TOP INOX A212 GS 45 51 60 75 M6x55 M8x60 M10x73 M12x90 10 12 14 18 55 60 70 85 6 15 30 50 8±0,5 10±0,5 12,5±0,5 16±0,5 TOP INOX A2 OS with eyebolt (A2 Stainless Steel) Code 3795 3796 3797 3798 Description Lt mm eyebolt d x L0 mm d0 mm h1 mm Tinst Nm Ø mm TOP INOX A2 6 OS TOP INOX A2 8 OS TOP INOX A210 OS TOP INOX A212 OS 45 51 60 75 M6x55 M8x60 M10x73 M12x90 10 12 14 18 55 60 70 85 6 15 30 50 10±0,5 11,8±0,5 14,5±0,5 17±0,5 TOP INOX A2 BD with threaded stud (A2 Stainless Steel) Code Description 25705 TOP 6BDA2 57 25706 TOP 8BDA2 75 25707 TOP10 BD A2 90 Lt mm stud d x Lb mm d0 mm h1 mm Tfix max mm Tinst Nm Ch 45 51 60 M6x55 M8x75 M10x90 10 12 14 55 60 70 10 10 20 10 25 40 10 13 17 Screw length calculation: Lv = Lt + tfix h1 =Min. hole depth Lt =Anchor length Lv =Screw length d0 =Hole diameter d =Screw diameter tfix =Fixture thickness tinst =Torque Ch =Spanner Lb =Stud length L0 =Eyebolt length Lg =Hook-bolt length Solid brick HEAVY DUTY ANCHORS Vorpa TOP HEAVY DUTY ANCHORS pre-setting heavy duty anchors Vorpa TOP Steel anchors with ETA option 7 (CE marking) for non-cracked concrete Non-cracked concrete Technical data Anchor type Installation data TOP –TOP A4 –TOP BU – TOP BU A4 d Anchor diameter L Anchor length hef Effective anchorage depth Tfix Fixture thickness d0 Drill hole diameter h1 Drill hole depth df Hole diameter in the fixture Tinst Torque moment M6 M8 M10 M12 mm mm mm mm mm mm mm Nm 10 45 39,5 10 10 55 7 10 12 51 44,5 14 12 60 9 25 14 60 51,5 20 14 70 12 40 18 75 63 25 18 85 14 75 Critical axial spacing Critical edge distance Minimum axial spacing Minimum edge distance Minimum thickness member Scr,N Ccr,N Smin Cmin hmin mm mm mm mm mm 120 60 65 45 135 135 75 90 70 135 155 90 135 85 140 190 120 165 115 160 Installation data TOP BP Anchor diameter Anchor length Effective anchorage depth Fixture thickness Drill hole diameter Drill hole depth Hole diameter in the fixture Torque moment d L hef Tfix d0 h1 df Tinst mm mm mm mm mm mm mm Nm 10 80 40,5 30 10 55 12 10 12 90 45,5 35 12 60 14 25 14 100 48,5 38 14 70 18 40 18 120 57 43 18 85 20 75 Critical axial spacing Critical edge distance Minimum axial spacing Minimum edge distance Minimum thickness member Scr,N Ccr,N Smin Cmin hmin mm mm mm mm mm 120 60 65 45 5 135 75 90 70 135 155 90 135 85 140 190 120 165 115 160 KN 9 1,17 1,33 1,5 12 16 20 1,22 1,41 1,55 KN Nm 8 12,2 14,6 30 23,2 59,8 33,7 104,8 KN 7,5 1,17 1,33 1,5 9 12 16 1,22 1,41 1,55 KN Nm 7 10,7 12,8 26,2 20,3 52,3 29,5 91,7 Values where the reduction factor is included TOP A4 – TOP BU A4 (Design loads) Nrk,P 5 Pull out failure KN 5 VRk,S 4,5 Shear failure KN 8,2 MRK,S 6,8 Bending moment Nm 16,8 6,6 13 33,3 8,8 18,9 58,8 Values where the reduction factor Pull out failure Shear failure Bending moment 7,6 18,5 47,8 13,3 26,9 83,8 Characteristic values TOP – TOP BU – TOP BP Nrk,P C20/25 Pull out failure c C30/37 c C40/50 c C50/60 Shear failure Bending moment VRk,S C20/25 MRK,S Characteristic values TOP A4 – TOP BU A4 Nrk,P C20/25 Pull out failure c C30/37 c C40/50 c C50/60 Shear failure Bending moment VRk,S C20/25 MRK,S is included TOP BU – TOP BP (Design loads) Nrk,P 5 KN 5,7 VRk,S 6,4 KN 11,6 MRK,S 9,7 Nm 24 Recommended loads TOP A4 - TOP BU A4 N Pull out failure T Shear failure M Bending moment KN KN Nm 3,5 3,2 4,9 3,5 5,8 12 4,7 9,3 23,8 6,3 13,5 42 Recommended loads TOP - TOP BU - TOP BP Pull out failure Shear failure Bending moment KN KN Nm 3,5 4,5 6,9 4 8,3 17,1 5,4 13,2 34,1 9,5 19,2 59,8 Natural stone Solid brick pre-setting heavy duty anchors Steel anchors with ETA option 7 (CE marking) for non-cracked concrete Non-cracked concrete Installation data Top Anchor Critical axial spacing Critical edge distance Minimum axial spacing Minimum edge distance Minimum structural thickness Scr Ccr Smin Cmin hmin mm mm mm mm mm M6 120 60 65 45 135 M8 135 75 90 70 135 M10 155 90 135 85 140 Permissible loads - applications in concrete C20/25 TOP TS - TOP DC TOP BD-TOP BD A2 TOP OS-TOP OS A2-TOP OP TOP GS-TOP GS A2 TOP A2 - - - daN daN daN daN daN M12 190 120 165 115 160 1 daN ≃1 kg 370 250 140 35 200 490 400 240 75 350 600 500 360 105 470 720 650 600 160 630 Always respect the installation parameters In case of axial spacings or edge distances are inferior than the critical ones, it is recommended to reduce the application load (please refer to the general technical guide) The table shows the permissible loads for tension, shear and combined tension and shear loads. Natural stone Solid brick HEAVY DUTY ANCHORS Vorpa TOP
© Copyright 2024 ExpyDoc
