Beispiel: Master Slave Verkabelung
Example: Master Slave wiring
R
RITTAL
GmbH & Co.KG
Auf dem St
Stützelberg
tzelberg
D-35745 Herborn
Artikel Nr.: SK 3124.100
CMC
Serielle
Schnittstelle
St.
X..
Serielles Schnittstellenkabel
Kühlger
hlgerät
cooling unit
RTT
Master
Adr.: 09
RTT
Slave
Adr.: 11
X1
St.
RTT
Slave
Adr.: 12
X1
X2
X3
X2
X3
X2
St.
St.
RTT
Slave
Adr.: 19
X1
X3
X2
St.
X2
X1
X3
X2
St.
X2
X3
X2
X2 X2
X2 X2
X2
Bu. St.
Bu. St.
Bu.
Master Slave BUS Kabel
Art.- Nr.: SK 3124.100
Beschreibung
Description
Die Adresse des Masters ist abh
abhängig
ngig von der Anzahl der
angeschlossenen Slave Ger
Geräte
te (09 = Master mit 9 Slave Ger
Geräten)
ten)
Die Adresse eines Slave Ger
Gerätes
tes beginnt immer mit der 1.
Die 2 Zahl stellt die eigentliche Adressierung dar.
Maximal kkönnen
nnen 9 Slave Ger
Geräte
te an einer Master Einheit betrieben
werden, wobei jedes Ger
Gerätt Master sein kann.
Maximale Gesamtl
Gesamtlänge
nge aller anzubindenden Ger
Geräte
te 50m.
Es kkönnen
nnen 1 Phasige und 3 Phasige Ger
Geräte
te angeschlossen werden.
The address of the master depends on the number of
attached Slave units. (09 = master connected with 9 Slave units)
The address of the Slaves starts with 1.
The 2nd number represents the address of the Slave unit.
Max. 9 Slave units could be connected to one master unit.
Maximum lenght of the Master/Slave LAN all over is 50m.
Cooling units with different voltages can be connected
in a Master/Slave Network.
Programmierung siehe Montageanleitung Punkt 8
Programming see assembly instruction manual point 8
RTT - Rittal Top Therm K
Kühlger
hlgeräte
te
X1 - Netzanschlu
Netzanschluß / TTürendschalter
rendschalter / Alarme
X2 - Master Slave Anschlu
Anschluß SUB-D 9polig
X3 - Serielle Schnittstelle SUB-D 9polig
St. - Stecker SUB-D 9p.
Bu. - Buchse SUB-D 9p.
Rittal Top Therm Heat Exchanger
AC Power Supply/door switch/alarms
Master Slave Connection SUB-D 9p.
Serial Interface SUB-D 9p.
plug SUB-D 9p.
jack SUB-D 9p.
R
Networking & Monitoring RTT PLUS with Comfortcontroller
Master
Comfortcontroller:
only for RTT PLUS Units with Comfort Controller
Chart 1
Slave (Max. 9)
•Digital Temperature Display
SK – Bussystem SK 3124.100
(Serial cabel – Interface)
•Hysterese: 2 – 10 K (factory setting 5 K)
nB = nK – 1
•2 potential free Alarm Contacts
nB : number of required units
•Visualising of all System Codes
Chart 2
Chart 3
nK : number of cross linked units
•Storage of all System States in a Logfile
Length: 3m
•Integration into Remote Monitoring Systems
Alternative Power Pack 48V
Software: RiDiag II
Readout of Temperatures, Statistics
DK 7320.435
RS232
SK 3124.100
RS232
SK 3124.100
RS232
SK 3124.100
Software for Monitoring etc.
Max. 9
www.rittal.de; www.cmc-tc.com
24V
Power Pack: DK 7320.425
Length: 1,65m (24V)
Interface card: SK3124.200
RTT PLUS with Comfort Controller
Interfacecard: SK3124.200
Universal I/O Unit: DK 7320.210
Configuration: keypress
RJ45*
24V
Power Pack: DK 7320.425
Sensoren / Aktoren: Chart 1
Inputs: 4
RJ45*
CMC-TC Processing Unit: DK 7320.100
RJ45*
Max. 4
RJ45*
Climate Unit: DK 7320.230
Configuration: keypress
RJ45*
RJ45*
Sensoren / Aktoren: Chart 2
Inputs: 2
Acess: Anti interference condensator
for fan DK7200490
Fan Control System: DK 7320.810
speed controled fan system
24V
Power Pack: DK 7320.425
Fan Alarm System: DK 7320.811
Fan alarm message
RJ45*
24V
Power Pack: DK 7320.425
RJ45*
Connection cords
Max. 10
Master Unit: DK 7320.000
RJ45*
Sensoren: Chart 3
Inputs: 2
RJ45*
RJ45*
CMC-TC-Display Unit: DK 7320.490
Local display of Alarm-and
Status messages at the Rack
D/F/B – DK 7200.210
GB – DK 7200.211
CH – 7200.213
USA/CDN – DK 7200.214 (115V)
Extension cable – DK 7200.215
RJ45*
Access Unit: DK 7320.220
Configuration: keypress
RTT PLUS with
Comfortc.
*RJ45
DK 7320.470 // (0,5m)
DK 7320.472 //
(2m)
DK 7320.481 // (10m)
rubber connectior 230V
230V
Interfacecard: SK3124.200
RJ45*
24V
transceiver cable DK 7200.221
CMC-TC-GSM Unit: DK 7320.820
Local display of Alarm- und
Status messages at the Rack
Power Pack DK 7320.425
Switch
Master-Slave-Mode - requirements for running two units:
1 CMC Processing Unit: DK 7320.100
1CMCCooling units,Interfacecard for Cooling unit (RTT-I/O
Unit SK 3124.200)
UpLink
RJ45*
1 Power Pack 24 V DC, 100 – 240 V AC (DK 7320.425)
1 Connection cable D with IEC320-Connector (DK 7200.210)
1 Cat5-Connection cable , 2 m, for Connection RTT-I/O Unit with
Processing Unit (PU)
1 Data cable RS232, 2m, for Connection RTT-I/O Unit to
RTT-Cooling unit with Comfortcontroller
Max. 10
230V
Master Unit
Additional required : transceiver cable DK 7200.221
Slot for SIM Card
and Antenna
connection
RJ45*
CMC-TC-ISDN Unit: DK 7320.830
Installation of a redundancy way of
transmission if no network is
available
Optional
24 Vdie
DC,
80Unit
mAhier
Power
Optional kann
ISDN
mit 24 V
DC, 80mA
werden.
Supply
forversorgt
the ISDN
unit. Dies
Thisist
is nicht
not
erforderlich, ifwenn
Einheit andirectly
die PU
necessary
it is die
connected
Unit angeschlossen
with
the PU unit. ist.
Stand: Juli 2007 R.B. PMSK