Catalog Number Project TECHLIGHT Type FEATURES & SPECIFICATIONS P U RO DLY MA D E CONSTRUCTION ─ The housing is made of compression molded fiber reinforced polyester composite. The color impregnated SR2 composite will not flake or peal. Multiple ring/guard assemblies are available for a customizable trim finish. USA Medium HID/Incandescent Burial Light TDB3W SERIES IN T HE USA OPTICAL SYSTEM ─ Flood and spot reflectors are available for HID E17 lamps. The fixture can accomodate reflector shaped lamps for specific beam patterns. Convex and walk over lenses are both available. ELECTRICAL SYSTEM ─ The fixture can be used with up to 70W E17 and Par38 Metal Halide lamp/ballast systems. All ballast trays are thermally protected and come pre-wired to specific line voltages via quick connects. Preinstalled 15’ and 30’ power cords are available from the factory. MOUNTING ─ The TDB3W Well Light is an in-ground fixture and should be installed with back fill according to the Techlight TDB installation instructions. A ¾” conduit entry is supplied into the anti-siphon chamber of the housing. Shown with TDB3-RG-SS Stainless Steel Ring Ø7.8" Ø9.7" 12.8" Choose the bold face options for the appropriate luminaire configuration for your application and enter on the line above each fixture attribute. Accessories may be factory installed, depending on the particular accessory chosen, but still be ordered as a separate line item. Series TDB3W Ring/Guard 1 2 3 4 Composite Ring (TDB3-RG-COM) Composite Rock Guard (TDB3-GRD-COM) Stainless Steel Ring (TDB3-RG-SS) Brass Ring (TDB3-RG-BRASS) 1 2 3 4 5 6 7 8 9 0 - Ballast 35W MH MT 50W MH MT 70W MH MT 50W MV MT 75W MV MT 100W MV MT 50W HPS MT 70W HPS MT 100W HPS MT None - for use with incandescent options Optics 1 2 3 4 Housing Height Outside Diameter TDB3W 12.8” 7.8” Example: TDB3W-4-2-1-2-1-4-0 ORDERING INFORMATION TDB3W - Series - - Lens Flood Reflector (TDB3W-FFR) Spot Reflector (TDB3W-FSR) Wall Wash (TDB3W-WWA) Wiring Harness1 (TDB3WH) 1 2 3 Flat Lens (TDB3-GK-WO) Convex Lens (TDB3-GK-CON) Slip Resistant Lens (TDB3W-GK-EG) Lamp 2 3 4 5 6 7 8 9 10 11 13 14 15 16 MH35PAR30FLMED MH35PAR30SPMED MH50MED MH70MED MH70PAR30FLMED MH70PAR30SPMED CMH70PAR38/FL25 CMH70PAR38/WFL CMH70PAR38SP15 MV50MED MV75MED MV100MED MV100R30MED MV100PAR38MED 17 18 19 20 21 24 25 26 27 28 29 30 Voltage HPS50MED HPS70MED Q50PNF130 Q50P30NS130 GE48P30H120F Q90P38F130 Q60P38S120 MV50R30CMEDE MV50R30MEDE MV100R30MEDE MV100R30CMEDE HPS100MED 1 2 3 4 120V 208V 240V 277V Cord 0 1 2 None 15’ Cord (TDBCORD-15) 30’ Cord (TDBCORD-30) Accessories (Order as separate line items) PK3 TDB3AFD S38 TDB3GG TDB3IL Concrete Pour Kit Anti-floatation Device Small Glare Shield Internal Louver Directional Louver NOTES 1 Wiring harness must be ordered for incandescent lamping options. Incandescent lamps will be reflectorized and do not need an additional reflector. www.techlightusa.com **All dimensions and specifications are subject to change without notice.** REV: 20150203-02 TDB3W Medium HID/Incandescent Burial Light FIXTURE OPTIONS TDB3-RG-COM Composite Ring TDB3-GRD-COM Composite Rock Guard TDB3-RG-SS Stainless Steel Ring TDB3-GK-WO Flat Lens TDB3-GK-CON Convex Lens TDB3W-GK-EG Slip Resistant Lens TDB3-RG-BRASS Brass Ring ADDITIONAL FIXTURE ACCESSORIES PK3 Concrete Pour Kit TDB3AFD Anti-floatation Device TDB3GG Internal Louver TDB3IL Directional Louver TECHLIGHT S38 Glare Shield Techlight, Inc. 2707 Satsuma Drive Dallas, TX, 75229 Phone: 214-350-0591, 800-225-0727, Fax: 214-350-9137 www.techlight.com
© Copyright 2024 ExpyDoc
