SECTION 4 Directional Lights, 12V

DIRECTIONAL LIGHTS
DL-15SM-LEDP12V-BAR
4w LED Flat Panel
Cast Brass
12 volt/120 volt
RXD-08-LED-BRS
4w ARROW LED (20w max.)
Machined brass bullet
33
DIRECTIONAL LIGHTS
DL-03 SPECIFICATIONS:
CONSTRUCTION: Cast aluminum or cast brass Bullet; matching cast aluminum or brass
adjustable swivel
LAMP SUPPLIED: See ordering information below for PAR36 lamp model
4000 hours average rating (50w max.)
SOCKET: None, PAR36 lamp supplies connection via 1/4" quick connect or stud terminal
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only)
MOUNTING: FA-03 black 9" ABS stake threaded 1/2" NPS
FINISH: Aluminum-Black texture polyester powder coat. Optional finishes available
Brass-Unfinished brass. Optional finishes available
"
4.5mm
12 volt/120 volt
Putting Green Lights
114
DL-03-BAV
18w, 25w, or 36w PAR36 (50w max.)
Solid Brass
Catalog Number
Description
DL-03-BLT
DL-03-BRS
5" aluminum Bullet
5" brass Bullet 36w PAR36 (QWFL)
36w PAR36 (QWFL)
DL-03-4414-BLT
DL-03-4414-BRS
5" aluminum Bullet
5" brass Bullet
18w PAR36 (MFL)
18w PAR36 (MFL)
DL-03-VWFL-BLT
DL-03-VWFL-BRS
5" aluminum Bullet
5" brass Bullet 25w PAR36 (VWFL)
25w PAR36 (VWFL)
Lamp Supplied
DL-03
Recommended Enhancements FOR DL-03 SERIES:
12v Lamp Options: See pages 146-147 group L, PAR36
FA-113 Extra-Long Shield, 6" (optional powder coat finishes available, see page 8)
DL-04 SERIES SPECIFICATIONS:
CONSTRUCTION: Extruded aluminum; stamped brass, copper or stainless steel; matching
cast aluminum, brass or stainless steel adjustable swivel (copper has cast brass swivel)
REFLECTOR: Diamond embossed specular aluminum
LENS: Brass/Copper/SS - clear tempered glass; Aluminum - high impact clear acrylic
LAMP SUPPLIED: 18w S8 #1141; 1200 hours average rating (25w max.)
Note: 35w max with DC socket
LAMP OPTIONS:12v-We recommend 10,000 hours average rating Xenon (-X) or Halogen
(-H), 2.2w 50,000 hours average rating OMNI-3 LED (-LED3) or 4w 50,000 hours average rating
LED flat panel (-LEDP)
SOCKET: Single contact bayonet, brass nickel plated lamp socket screw shell (Ba15s);
double contact bayonet base (Ba15d) for 120v., both with 200°C silicone lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
120v 18 guage black, white, green
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only) 12v. only
MOUNTING: FA-03 black 9" ABS stake threaded 1/2" NPS
FINISH: Aluminum-Black texture polyester powder coat. Optional finishes available
Brass-Unfinished brass. Optional finishes available
Stainless Steel-Brushed
LEDS by
LED
LED
50,000 HOUR
3
DL-04-LEDP412V-SS
4w LED Panel
Stainless Steel
IP53
3
LED
3
LED
LEDS by
2.5"
64mm
4.5"
114mm
4.1"
104mm
DL-04
34
5"
127mm
3.5"
3.5"
89mm
89mm
3.7"
2.5"
94mm
64mm
6.3"
4.5"
160mm
114mm
3.5"
89mm
LEDS by
3
LED
3
READY
LED
LED FLAT PANEL
AVAILABLE
add -LEDP to part#
TERTEK
IN
L I ST E D
4.1"
104mm
DL-04-HE
DL-04-COP/-BRS/-SS
DL-04 series continued on next page
Catalog Number Description
DL-04-BLT
DL-04-HE-BLT
3.5" extruded aluminum floodlight with high-impact clear acrylic lens
3.5" extruded aluminum floodlight with high-impact clear acrylic lens & Hood Extension
DL-04-BRS
3.5" brass floodlight with glass lens and brass swivel
DL-04-COP
3.5" copper floodlight with glass lens and brass swivel
DL-04-SS
3.5" stainless steel floodlight with glass lens and stainless steel swivel
DL-04-HE-LEDP412V-WTX
4w LED Panel
Extruded Aluminum
Recommended Enhancements FOR DL-04 SERIES:
12v Lamp Options: See page 143 groups A, B, D
120v Lamp Options: See page 148 groups N, O
DIRECTIONAL LIGHTS
DL-04-LEDP412V-BLT
4w LED Panel
Extruded Aluminum
FA-07 Square 1/4" Hex Cell Louver
FA-10-BLUE Blue Plastic Gel
FA-10-GREEN Green Plastic Gel
12 volt/120 volt
DL-04-LEDP412V-COP
4w LED Panel
Solid Copper
35
Putting Green Lights
DIRECTIONAL LIGHTS
DL-07, DL-08 & DL-09 SPECIFICATIONS:
CONSTRUCTION: Cast aluminum or cast brass hat; matching extruded aluminum or brass
stanchion
LENS: High impact clear acrylic
LAMP SUPPLIED: 18w S8 #1141; 1200 hours average rating (25w max.)
LAMP OPTIONS: 12v-We recommend 10,000 hours average rating Xenon (-X) or Halogen
(-H), 2.2w 50,000 hours average rating OMNI-3 LED (-LED3) or 4w 50,000 hours average rating
LED flat panel (-LEDP-DL-07 only)
SOCKET: Single contact bayonet, brass nickel plated lamp socket screw shell (Ba15s);
double contact bayonet base (Ba15d) for 120v, both with 200°C silicone lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only)
MOUNTING: FA-03 black 9" ABS stake threaded 1/2" NPS
FINISH: Aluminum-Black texture polyester powder coat. Optional finishes available
Brass-Unfinished brass. Optional finishes available
Catalog Number Description
DL-07-LEDPBAV
4w LED Panel
Brass
DL-07-BLT
DL-07-BRS
DL-08-BLT
DL-08-BRS
DL-09-BLT
DL-09-BRS
5" Shell Floodlight
5" Shell Floodlight
5" China Floodlight
5" China Floodlight
5" Mushroom Floodlight
5" Mushroom Floodlight
5.25"
133mm
5.5"
5.125"
1.75"
130mm
44mm
140mm
2.125"
1.75"
44mm
54mm
5.75"
146mm
11.5"
12 volt/120 volt
3
LEDS by
50,000 HOUR
LED MODULE
AVAILABLE
add -LEDM to part#
DL-09-LEDPBAR
2.2w Omni LED
Brass
DL-08
LED
3
LED
3
LED
LEDS by
LEDS by
36
267mm
267mm
DL-07
DL-08-LEDPBAV
2.2w Omni LED
Brass
10.5"
10.5"
292mm
3
LED
3
LED
LED
READY
DL-09
IP53
TERTEK
IN
L I ST E D
CONSTRUCTION: Cast aluminum or cast brass mini directional flood light on matching cast
aluminum or brass stake
LENS: High impact acrylic lens
LAMP SUPPLIED: 5w G4 bi-pin Xenon; 10,000 hours average rating (5w Max)
LAMP OPTIONS: 3w 50,000 hours average rating LED Module (-LEDM)
SOCKET: High temperature ceramic G4 with 250°C silicone lead wires
No socket on -LEDM models
WIRING: Black 3 foot 18/2 zip cord from base of fixture
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only)
MOUNTING: FA-03-RX-BLT (Aluminum models) or FA-03-RX-BRS (Brass models)
FINISH: Aluminum - Black texture polyester powder coat.
Brass - Unfinished brass.
Optional finishes available.
Catalog Number Description
DL-09SM-X-BLT 3.75" Mushroom Floodlight
DL-09SM-X-BRS 3.75" Mushroom Floodlight
3.75"
95mm
IP53
TERTEK
IN
L I ST E D
1.50"
38mm
6.00"
152mm
50,000 HOUR
LED MODULE
AVAILABLE
add -LEDM to part#
90°
Rotation
7.50"
191mm
DL-09-SM
12 volt/120 volt
DL-09SM-LEDMBLT
3w LED Module (25w max.)
Aluminum
DIRECTIONAL LIGHTS
DL-09-SM SPECIFICATIONS
37
Putting Green Lights
DIRECTIONAL LIGHTS
DL-10, DL-10-HE SPECIFICATIONS:
CONSTRUCTION: Extruded aluminum floodlight with cast aluminum adjustable swivel.
Heavy-duty stamped aluminum Hood Extension available (add -HE to part number)
REFLECTOR: Highly polished specular aluminum
LENS: High impact clear acrylic
LAMP SUPPLIED: 3
5 watt T4 D.C. Halogen; 10,000 hours average rating (50w max.)
LAMP OPTIONS: We recommend 10,000 hours average rating Xenon (-X) or 2.2w 50,000
hours average rating OMNI-3 LED (-LED3) or 4w 50,000 hours average rating
LED flat panel (-LEDP)
SOCKET: Double contact bayonet, brass nickel plated lamp socket screw shell (Ba15d)
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
120v 18 guage black, white, green
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only) 12v only
MOUNTING: FA-03 black 9" ABS stake threaded 1/2" NPS
FINISH: Black texture polyester powder coat. Optional finishes available
Catalog Number Description
DL-10-LEDP412V-CAM
4w LED Panel
Extruded Aluminum
DL-10-H-BLT
DL-10-HHE-BLT
50,000 HOUR
LED FLAT PANEL
AVAILABLE
IP53
LED
12 volt/120 volt
READY
LED
LED
3
LED
LED
3
LED
LEDS by
TERTEK
IN
LEDS by
Recommended Enhancements FOR DL-10 SERIES:
12v Lamp Options: See page 143 groups A, B, C, D
120v. Lamp Options: See page 148 groups N, O
3
3
add -LEDP to part#
LEDS by
FA-07-26
Square 1/4" Hex Cell Louver
FA-10-26-BLUE Blue Plastic Gel
FA-10-26-GREEN Green Plastic Gel
3
L I ST E D
DL-10-HE-LEDP412V-RST
4w LED Panel
Extruded Aluminum
4.5"
5.1"
114mm
130mm
76mm
5"
6.3"
127mm
160mm
4.1"
4.1"
104mm
104mm
8.75"
222mm
DL-10-HE
38
5.1"
3"
130mm
8.75"
222mm
DL-10-H
Extruded Floodlight
Extruded Floodlight with Hood Extension
CONSTRUCTION: Cast aluminum or cast brass Bullet; matching cast aluminum or brass
adjustable swivel
LENS: High impact clear tempered convex glass
LAMP SUPPLIED: 20w MR16 FL(BAB) 5000 hours average rating (50w max)
LAMP OPTIONS: We recommend 20w MR16 ULTRA10, 000 hours average rating;
20w MR16 TITAN 18, 000 hours average rating; 4w or 6w 50,000 hrs ARROW LED or 4w ARROW
Saver LED 40,000 hours average rating
SOCKET: High temperature ceramic bi-pin GU5.3 with 250°C silicone lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only)
MOUNTING: FA-03 black 9" ABS stake threaded 1/2" NPS
FINISH: Aluminum-Black texture polyester powder coat. Optional finishes available
Brass-Unfinished brass. Optional finishes available
Catalog Number Description
2.6" Bullet (MR16)
2.6" Bullet (MR16)
IP54
LED
FOCUS
rrow
FA-08-21
FA-11-AMBER
FA-11-BLUE
FA-11-GREEN
FA-11-RED
FA-98
FA-104
2.6"
66mm
Round 1/8"Hex Cell Louver
Amber Tempered Glass Lens
Blue Tempered Glass Lens
Green Tempered Glass Lens
Red Tempered Glass Lens
Linear Spread Tempered Glass Lens
Wide Spread Tempered Glass Lens Softener
LEDS by
DL-13
12 volt/120 volt
DL-13-LEDBLT
4w ARROW MR16 LED (50w max.)
Cast Aluminum
16
Recommended Enhancements FOR DL-13 SERIES:
12v Lamp Options: See pages 143-144 groups A, B, D, E
5"
6. 5mm
DL-13-BLT
DL-13-BRS
DIRECTIONAL LIGHTS
DL-13 SERIES SPECIFICATIONS:
READY
TERTEK
IN
L I ST E D
DL-14 SERIES SPECIFICATIONS:
CONSTRUCTION: Cast aluminum, or cast brass Bullet; mounted on 7" black PVC angle cut spike
LENS: High impact clear tempered convex glass
O-RING: High temperature red silicone
LAMP SUPPLIED: 20w MR16 FL(BAB) 5000 hours average rating (50w max)
LAMP OPTIONS: We recommend 20w MR16 ULTRA10,000 hours average rating;
20w MR16 TITAN 18,000 hours average rating; 4w or 6w 50,000 hrs ARROW LED or
4w ARROW Saver LED 40,000 hours average rating
SOCKET: High temperature ceramic GU5.3 bi-pin with 250°C silicone lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only)
MOUNTING: 7" x 1.25" diameter black PVC angle cut spike
FINISH: Aluminum-Black texture polyester powder coat. Optional finishes available.
Brass-Unfinished brass. Optional finishes available.
DL-14-LED-BAV
4w Arrow MR16 LED (50w max.)
Solid Brass
IP54
LED
FOCUS
rrow
LEDS by
READY
TERTEK
IN
L I ST E D
Catalog Number Description
DL-14-BLT
DL-14-BRS
2.6" Bullet (MR16)
2.6" Bullet (MR16)
Recommended Enhancements FOR DL-14 SERIES:
12v Lamp Options: See pages 143-144 group E
FA-08-21
FA-11-AMBER
FA-11-BLUE
FA-11-GREEN
FA-11-RED
FA-98
FA-104
Round 1/8" Hex Cell Louver
Amber Tempered Glass Lens
Blue Tempered Glass Lens
Green Tempered Glass Lens
Red Tempered Glass Lens
Linear Spread Tempered Glass Lens
Wide Spread Tempered Glass Lens Softener
2.6"
5"
66mm
127mm
7"
178mm
DL-14
39
DIRECTIONAL LIGHTS
DL-15 SERIES SPECIFICATIONS:
CONSTRUCTION: Cast aluminum, cast brass or composite flood; matching cast aluminum, brass
or composite adjustable swivel
REFLECTOR: Diamond embossed specular aluminum
LENS: High impact clear acrylic
LAMP SUPPLIED DL-15-H: 35 watt Halogen D.C. - 10,000 hours average rating (75w max.)
LAMP SUPPLIED DL-15-SC: 18 watt S8 #1141 S.C. - 1200 hours average rating (25w max.)
LAMP OPTIONS: We recommend 10,000 hours average rating Xenon (-X) or Halogen (-H), 2.2w
50,000 hours average rating OMNI-3 LED (-LED3) or 4w 50,000 hours average rating
LED flat panel (-LEDP)
SOCKET DL-15-H/-SC: Double contact bayonet base (Ba15d) or Single contact bayonet base
(Ba15s). Both with brass nickel plated lamp socket screw shell and 200°C silicone lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only) 12v only
MOUNTING: FA-03 black 9" ABS stake threaded 1/2" NPS
FINISH: Aluminum-Black texture polyester powder coat.
Brass-Unfinished brass.
Optional finishes available;
12 volt/120 volt
Putting Green Lights
DL-15-LEDP412V-BAR
4w LED Flat Panel
Cast Brass
DL-15SM SERIES SPECIFICATIONS:
DL-15-SM-LEDPR412V-CPR
4w Round LED Flat Panel
Cast Aluminum
50,000 HOUR
LED FLAT PANEL
AVAILABLE
TERTEK
IN
IP56
3
L I ST E D
LEDS by
3.75"
3
LED
133mm
3.5"
3
LED
3
LED
LED
5.25"
LEDS by
95mm
add -LEDP to part#
3
LEDS by
CONSTRUCTION: Cast aluminum, cast brass flood; matching cast aluminum or brass
adjustable swivel
REFLECTOR: Diamond embossed specular aluminum
LENS: Tempered flat glass
LAMP SUPPLIED DL-15-SM 20w T4 Bi-Pin Halogen (-H) - 5,000 hours average rating (20w max.)
LAMP OPTIONS: We recommend 10,000 hours average rating Xenon (-X) or Halogen (-H), or
4w 50,000 hours average rating LED flat panel (-LEDP)
SOCKET DL-15-SM: High temperature ceramic GU5.3 bi-pin with 250°C silicone lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only) 12v only
MOUNTING: FA-03 black 9" ABS stake threaded 1/2" NPS
FINISH: Aluminum-Black texture polyester powder coat.
Brass-Unfinished brass.
Optional finishes available;
LED
READY
LED
3.25"
3.75"
83mm
95mm
Catalog No.
Description Lamp
DL-15-H-BLT
DL-15-H-BRS
CDL-15-H
DL-15-SC-BLT
DL-15-SC-BRS
CDL-15-SC
Aluminum floodlight
Brass floodlight
Composite floodlight
Aluminum floodlight
Brass floodlight
Composite floodlight
35w T4 D.C. Halogen
35w T4 D.C. Halogen
35w T4 D.C. Halogen
18w S8 #1141
18w S8 #1141
18w S8 #1141
DL-15-SMHBP-BLT
DL-15-SMHBP-BRS
Small Aluminum floodlight
Small Brass floodlight
20w T4 BP Halogen
20w T4 BP Halogen
2.25"
57mm
89mm
4.1"
104mm
9"
9"
Recommended Enhancements FOR DL-15 SERIES:
12v Lamp Options: See page 143 groups A, B, C, D
120v. Lamp Options: See page 148 groups N, O, P
229mm
229mm
DL-15
40
DL-15-SM
FA-07-15
Rectangular 1/4" Hex Cell Louver
FA-10-15-BLUE Blue Tempered Glass Lens
FA-10-15-GREEN Green Tempered Glass Lens
DL-17-LED-BAR
2w MR11 LED (35w max.)
Cast Brass
Catalog Number Description
5"
2"
m
4.
Recommended Enhancements FOR DL-17 SERIES:
12v Lamp Options: See pages 144, 145 groups F, J
DL-17
4m
2" MR11 Aluminum Mini Bullet
2" MR11 Brass Mini Bullet
2" MR11 Stainless Steel Mini Bullet
51mm
11
DL-17-BLT
DL-17-BRS
DL-17-RB-SS
FA-08-17
Round 1/8" Hex Cell Louver
FA-10-17-BLUE Blue Tempered Glass Lens
FA-10-17-GREEN Green Tempered Glass Lens
FA-98-17
Linear Spread Tempered Glass Lens
FA-104-17Wide Spread Tempered Glass Lens Softener
DL-17RB-SS
FOCUS
IP54
rrow LED
READY
LEDS by
DL-17-RB-LED-SS
2w MR11 LED (35w max.)
Cast Stainless Steel
TERTEK
IN
L I ST E D
DIRECTIONAL LIGHTS
DL-17-LED-CAM
2w MR11 LED (35w max.)
Cast Aluminum
CONSTRUCTION-DL-17-BRS: Cast brass Bullet; adjustable cast brass swivel
DL-17-RB-SS: Cast stainless steel Bullet; adjustable cast stainless steel swivel
DL-17-BLT: Cast aluminum Bullet; adjustable cast aluminum swivel
Lens: High impact clear tempered convex glass
LAMP SUPPLIED: 20w MR11 FL (FTD); 2000 hours average rating (35w max.)
LAMP OPTIONS: We recommend 20w 10,000 hrs. average rating MR11 ULTRA
or 2w ARROW MR11 LED; 50,000 hours average rating
SOCKET: High temperature ceramic (GZ4) bi-pin, 250°C silicone lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only) 12v only
51 2"
MOUNT: FA-03 9" ABS stake threaded 1/2" NPS
m
m
2
FINISHES: Optional finishes available.
64 .5"
2"
m
m
51mm
DL-17-BRS: Unfinished brass
DL-17-RB-SS: Machined Stainless Steel
DL-17-BLT: Black texture
12 volt/120 volt
DL-17 SERIES SPECIFICATIONS:
DL-20 SERIES SPECIFICATIONS:
CONSTRUCTION: Cast aluminum, cast brass or composite bullet; matching heavy
duty cast aluminum, brass or composite adjustable swivel; matching extension
collar with lens
DL-20-MR16LEDBRT
4w ARROW MR16 LED (75w max.)
Cast Aluminum
3.5"
5.8"
147mm
89mm
DL-20
5.8"
147mm
3.5"
89mm
CDL-20AC-MR16LEDBRT
4w ARROW MR16 LED (75w max.)
Composite DL-20
5.25"
133mm
3.5"
89mm
DL-20-AC
3.5"
89mm
LENS: High impact clear tempered convex glass
O-RING: High temperature red silicone
LAMP SUPPLIED: 75 watt MR16 FL(EYC) 5000 hours average rating (75w max)
LAMP OPTIONS: We recommend 20w MR16 ULTRA10, 000 hours average rating;
20w MR16 TITAN 18, 000 hours average rating; 4w or 6w 50,000 hrs ARROW LED or
4w ARROW Saver LED 40,000 hours average rating
SOCKET: High temperature ceramic GU5.3 bi-pin with 250°C silicone lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only)
MOUNTING: FA-03 black 9" ABS stake threaded 1/2" NPS
3.5"
3.5"
FINISH:
Aluminum-Black
texture polyester powder coat.
89mm
5.25" 89mm
133mm
Brass-Unfinished
brass.
Optional finishes available See pg. 8
LEDS by
FOCUS
CATALOG NO.
DESCRIPTION
DL-20-MR16-BLT
DL-20-MR16-BRS
CDL-20-MR16-BLT
DL-20-AC-MR16-BLT
DL-20-AC
DL-20-AC-MR16-BRS
CDL-20-AC-MR16-BLT
Cast Aluminum Bullet
Cast Brass Bullet
Composite Bullet
Cast Aluminum Bullet, angle collar
Cast Brass Bullet, angle collar
Composite Bullet, angle collar
rrow
LED
READY
120 VOLT models WITH integrated electronic 75 watt TRANSFORMER available. add -t to part number
note: LED light bulbs are not compatible with -T models (50w max.)
Recommended Enhancements FOR DL-20 SERIES:
12v Lamp Options: See pages 143-144, 145 groups E, I
FA-08-06
Round 1/4" Hex Cell Louver
FA-10-20-BLUE Blue Tempered Glass Lens
FA-10-20-GREEN Green Tempered Glass Lens
FA-98-20
Linear Spread Tempered Glass Lens
FA-104-20
Wide Spread Tempered Glass Lens Softener
IP54
TERTEK
IN
L I ST E D
41
Putting Green Lights
DIRECTIONAL LIGHTS
12 volt/120 volt
DL-21 SERIES SPECIFICATIONS:
CONSTRUCTION: Cast aluminum, brass or composite Bullet; matching cast aluminum, brass
or composite adjustable swivel
LENS: Convex high impact clear tempered glass
LAMP SUPPLIED: 20w MR16 FL (BAB) 50w max. (20w max. on CDL-21) 5000 hours average rating
LAMP OPTIONS: 12v-We recommend 20w 10,000 hrs MR16 ULTRA, 20w 18,000 hrs TITAN or
4w or 6w 50,000 hrs ARROW LED or 4w ARROW Saver LED 40,000 hours average rating
SOCKET: High temperature ceramic GU5.3 bi-pin with 250° C silicone lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable (12/2, 10/2 or 8/2
only) 12v only
MOUNT: FA-03 9" ABS stake threaded 1/2" NPS
FINISH: Aluminum-Black texture polyester powder coat.
Brass-Unfinished brass.
Optional finishes available.
"
4.5
mm
114
3"
76mm
Catalog Number Description
DL-21-BLT
DL-21-BRS
CDL-21
Aluminum 3" MR16 Bullet
Brass 3" MR16 Bullet
Composite 3" MR16 Bullet
Recommended Enhancements FOR DL-21 SERIES:
12v Lamp Options: See pages 143-144, 145 groups E, I
FA-08-21
Round 1/8" Hex Cell Louver
FA-11-BLUE Blue Tempered Glass Lens
FA-11-GREEN Green Tempered Glass Lens
FA-98
Linear Spread Tempered Glass Lens
FA-104Wide Spread Tempered Glass
Lens Softener
TERTEK
IN
L I ST E D
IP54
LED
READY
DL-21
FOCUS
CDL-21-LEDBLT
4w ARROW MR16 LED (20w max.)
Aluminum
rrow
LEDS by
DL-21-LEDCAM
4w ARROW MR16 LED (20w max.)
Cast Aluminum
DL-21-LEDBAV
4w ARROW MR16 LED (20w max.)
Solid Brass
42
DL-21-LEDBAR
4w ARROW MR16 LED (20w max.)
Solid Brass
LENS: High impact clear tempered convex glass
Lamp Supplied: 20w MR16 FL (BAB) 5000 hours average rating
Lamp Options: 12v-We recommend 20w 10,000 hrs MR16 ULTRA, 20w 18,000 hrs TITAN or
4w or 6w 50,000 hrs ARROW LED or 4w ARROW Saver LED 40,000 hours average rating
Socket: High temperature ceramic GU5.3 bi-pin with 250°C silicone lead wires
Wiring: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
120v 18 guage black, white, green
Connection: FA-05 Quick Connector (not supplied) from fixture to main cable (12/2, 10/2 or
8/2 only) 12v only
Mount: FA-03 9" ABS stake threaded 1/2" NPS
FINISH: Aluminum-Black texture polyester powder coat
Brass-Unfinished brass
Stainless Steel - machined finish
Optional finishes available
DL-22-LED-SS
4w ARROW MR16 LED (20w max.)
Stainless Steel
Recommended Enhancements FOR DL-22 SERIES:
12v Lamp Options: See pages 143-144, 145 groups E, I
FA-08-21
Round 1/8" Hex Cell Louver
FA-11-BLUE Blue Tempered Glass Lens
FA-11-GREEN Green Tempered Glass Lens
FA-98
Linear Spread Tempered Glass Lens
FA-104Wide Spread Tempered Glass
Lens Softener
Catalog Number Description
Max.
DL-22-BLT
DL-22-BRS
DL-22-SS
DL-22-XEC-BLT
DL-22-XEC-BRS
Cast aluminum Bullet
Cast brass Bullet
Cast stainless steel Bullet
Cast aluminum Bullet with extra-long collar
Cast brass Bullet with extra-long collar
50w
35w
50w
50w
35w
LED
16
5"
32 mm
6.
1
m
0m
5"
14
5.
2.6"
READY
2.6"
66mm
66mm
DL-22-LEDBAV
4w ARROW MR16 LED (50w max.)
Solid Brass
FOCUS
IP54
rrow
TERTEK
IN
LEDS by
DL-22
DL-22-BRS
DL-22-SS
DIRECTIONAL LIGHTS
CONSTRUCTION: Cast aluminum, brass or 316 Stainless Steel Bullet; matching heavy duty cast
aluminum, brass or 316 Stainless Steel adjustable swivel
12 volt/120 volt
DL-22 SERIES SPECIFICATIONS:
DL-22-XEC
L I ST E D
DL-23 SERIES SPECIFICATIONS:
CONSTRUCTION: Cast aluminum or cast brass Bullet; matching cast aluminum or brass adjustable swivel
LENS: High impact clear tempered convex glass
Lamp supplied: 20w MR8 FL; 2000 hours average rating
Lamp Options: We recommend 1.5w 25,000 hrs wide flood MR8 LED
Socket: High temperature ceramic GZ4 bi-pin with 250°C silicone lead wires
Wiring: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
DL-23-LED-BRS
1.5w MR8 LED (20w max.)
Solid Brass
"
"
33m
m
m
1.5"
38mm
2.2
56m
"
m
Connection: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only) 12v only
Mount: FA-03 9" ABS stake threaded 1/2" NPS
FINISH: Aluminum - Black texture polyester powder coat
Brass - Unfinished brass.
Optional finishes available
DL-23
Catalog Number Description
Max.
Standard Finish
DL-23-BLT
DL-23-BRS
DL-23-CSM-BLT
DL-23-CSM-BRS
20w
20w
20w
20w
Black texture
Unfinished brass
Black texture
Unfinished brass
MR8 Aluminum Bullet
MR8 Brass Bullet with
MR8 Aluminum Bullet
MR8 Brass Bullet
LED
READY
Recommended Enhancements FOR DL-23 SERIES:
12v Lamp Options: See page 145 group G
DL-23-LED-CSM-BAV
1.5w MR8 LED (20w max.)
Solid Brass
1.3
3.5
89m
FA-08-23
Round 1/8" Hex Cell Louver
FA-11-23-BLUE
Blue Tempered Glass Lens
FA-11-23-GREEN Green Tempered Glass Lens
FA-98-23
Linear Spread Tempered Glass Lens
FA-104-23Wide Spread Tempered Glass Lens
Softener
FOCUS
rrow
IP54
TERTEK
IN
LEDS by
L I ST E D
43
Putting Green Lights
DIRECTIONAL LIGHTS
12 volt
DL-40-2H SERIES LIGHT SPECIFICATIONS:
CONSTRUCTION: Die cast aluminum or die cast brass floodlight with heavy duty adjustable die cast aluminum
or die cast brass swivel
LENS: High impact clear tempered flat glass
GASKET: High temperature red silicone
REFLECTOR: Highly polished diamond embossed aluminum
LAMP SUPPLIED: 2 x 20w S.C. halogen 10,000 hour; 2 x 35w D.C. halogen 10,000 hour;
or 2 x 50w D.C. halogen 2,000 hour (Single Contact 40w max; Double Contact 100w max)
LAMP OPTIONS: We recommend 10,000 hours average rating Xenon (-2X),
or 8w 50,000 hours average rating LED flat panel (-LEDP)
SOCKET: Single contact bayonet, brass nickel plated lamp socket screw shell (Ba15s);
double contact bayonet base (Ba15d) for 120v, both with 200°C silicone lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
MOUNTING: Aluminum: FA-03 black 9" ABS stake, tapped 1/2"NPS
Brass: FA-03-LG black 9" oversize ABS stake, tapped 1/2"NPS
FINISH: Aluminum - Black texture polyester powder coat.
Brass - Unfinished brass.
Optional finishes available.
9.33"
237mm
DL-40-LEDP8W12V-WBR
8w LED Flat Panel
Cast Aluminum
TERTEK
IN
50,000 HOUR
LED FLAT PANEL
AVAILABLE
IP54
7.25"
L I ST E D
add -LEDP to part#
Catalog Number
Description Max. Lamp Supplied
DL-40-2H20-BLT
DL-40-2H35-BLT
DL-40-2H50-BLT
DL-40-2X20-BLT
Cast aluminum flood light
Cast aluminum flood light
Cast aluminum flood light
Cast aluminum flood light
40w
100w
100w
40w
2 x 20w 10k T3 Halogen
2 x 35w 10k T4 Halogen
2 x 50w 2k T4 Halogen
2 x 20w 10k T3 Xenon
DL-40-2H20-BRS
DL-40-2H35-BRS
DL-40-2H50-BRS
DL-40-2X20-BRS Cast brass flood light
Cast brass flood light
Cast brass flood light
Cast brass flood light
40w
100w
100w
40w
2 x 20w 10k T3 Halogen
2 x 35w 10k T4 Halogen
2 x 50w 2k T4 Halogen
2 x 20w 10k T3 Xenon
184mm
7.25"
9.33"
184mm
237mm
7.75"
4.2"
197mm
107mm
DL-40
DL-41 SERIES LIGHT SPECIFICATIONS:
Construction: Extruded aluminum or extruded brass mini
directional flood with 360° swivel
Lens: Tempered sandblasted (diffused) glass
Lamp Supplied: 10w G4 bi-pin Xenon; 10,000 hours average rating (10w Max)
LAMP OPTIONS: We recommend 3w 50,000 LED module
Socket: High temperature ceramic G4 with 250°C silicone lead wires
Wiring: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
Connection: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only) 12v only
Mount: FA-03 9" ABS stake threaded 1/2" NPS
50,000 HOUR
Finish: Aluminum – Black texture polyester powder coat
LED MODULE
Brass – Unfinished, optional finishes available
AVAILABLE
add
-LEDM to part#
Optional finishes available
DL-41-LEDM-BRS
3w LED Module
Extruded brass
Catalog Number
Description
DL-41-XBP10-BLT
DL-41-XBP10-BRS
DL-41HORXBP10-BLT
DL-41HORXBP10-BRS
DL-41VERTXBP10-BLT
DL-41VERTXBP10-BRS
Aluminum mini directional flood
Brass mini directional flood
Horizontal alum mini directional flood
Horizontal brass mini directional flood
Vertical alum. mini directional flood
Vertical brass mini directional flood
4.25"
1.00"
108mm
25mm
2.00"
1.00"
51mm
25mm
2.00"
51mm
8.00"
203mm
7.00"
178mm
DL-41-HOR
2.00"
51mm
IP54
3.875"
121mm
44
DL-41-VERT
DL-41VERTLEDM-WIR
3w LED Module
Extruded aluminum
TERTEK
IN
L I ST E D
DL-41
with optional FA-24 canopy
DL-41HOR-LEDM-CAM
3w LED Module
Extruded aluminum
CONSTRUCTION: Cast aluminum, Cast brass integrated heat sink base; matching cast adjustable
swivel with 240° rotation; Extruded aluminum, brass or copper housing (copper housing has brass base)
LENS: High impact clear tempered convex glass
O-RING: 2x High temperature red silicone
LIGHT SOURCE DL-42: Integrated 7w LED module (equivalent to 35w halogen) with 6 high power
Cree XPE LEDs; 50, 000 hours average rating
LIGHT SOURCE DL-43: Integrated 11w LED module (equivalent to 50w halogen) with 6 high power
Cree XPE LEDs; 50, 000 hours average rating
LIGHT SOURCE DL-45: Integrated 15w LED module (equivalent to 75w halogen) with 6 high power
Cree XPE LEDs; 50, 000 hours average rating
OPTICS: Interchangeable spot (15°), flood (40°), wide floof (60˚) and very wide flood (no optics)
DRIVER: Integrated on-board, no external driver required. 12v AC/DC input.
Voltage range 9-18v; Optimum operating range 12v-15v
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only)
MOUNTING:
Aluminum model: FA-03 black 9" ABS stake, tapped 1/2" NPS
Brass & Copper models: FA-03-LG large black 9" ABS stake, tapped 1/2" NPS
FINISH: Aluminum - Black texture polyester powder coat. Optional finishes available.
DL-42-LEDM740-BRS
7w LED Module
Brass
Brass & Copper - Unfinished.
Optional finishes available
DIRECTIONAL LIGHTS
DL-42, DL-43 & DL-45 SERIES LIGHT SPECIFICATIONS:
12 volt
LED Modules
7w, 11w &15w
LED Module Optics
15˚| 40˚| 60˚
Optics
FA-DL42OPTIC60 (60˚ Wide Flood)
FA-DL42OPTIC40 (40˚ Flood)
FA-DL42OPTIC15(15˚ Spot)
DL-43-LEDM1140-BAR
11w LED Module
Brass
TERTEK
IN
L I ST E D
IP54
DL-43-LEDM1115-BAR w/ FA-24MD-BAR
11w LED Module
Brass
45
DL-42/43/45 Information continued ON next page
DIRECTIONAL LIGHTS
CATALOG NO.
DESCRIPTION DL-42-LEDM760-BLT
DL-42-LEDM740-BLT
DL-42-LEDM715-BLT
DL-42-LEDM7WF-BLT
DL-42-LEDM760-BRS
DL-42-LEDM740-BRS
DL-42-LEDM715-BRS
DL-42-LEDM7WF-BRS
DL-42-LEDM760-COP
DL-42-LEDM740-COP
DL-42-LEDM715-COP
DL-42-LEDM7WF-COP
Aluminum Bullet, 60° Optics
Aluminum Bullet, 40° Optics
Aluminum Bullet, 15° Optics
Aluminum Bullet, No Optics
Brass Bullet, 60° Optics
Brass Bullet, 40° Optics
Brass Bullet, 15° Optics
Brass Bullet, No Optics
Copper Bullet, 60° Optics
Copper Bullet, 40° Optics
Copper Bullet, 15° Optics
Copper Bullet, No Optics
LAMP
7w LED Module
7w LED Module
7w LED Module
7w LED Module
7w LED Module
7w LED Module
7w LED Module
7w LED Module
7w LED Module
7w LED Module
7w LED Module
7w LED Module
Recommended Enhancements FOR DL-42/43 SERIES:
FA-08-DL-42-21
Round 1/4" Hex Cell Louver
FA-11-DL-42-BLUE
Blue Tempered Glass Lens
FA-11-DL-42-GREEN Green Tempered Glass Lens
FA-11-DL-42-AMBER Amber Tempered Glass Lens
FA-11-DL-42-RED
Red Tempered Glass Lens
FA-104-DL-42-SB
Wide Spread Sandblasted Glass Lens Softener
4.5”
DESCRIPTION DL-43-LEDM1160-BLT
DL-43-LEDM1140-BLT
DL-43-LEDM1115-BLT
DL-43-LEDM11WF-BLT
DL-43-LEDM1160-BRS
DL-43-LEDM1140-BRS
DL-43-LEDM1115-BRS
DL-43-LEDM11WF-BRS
DL-43-LEDM1160-COP
DL-43-LEDM1140-COP
DL-43-LEDM1115-COP
DL-43-LEDM11WF-COP
Aluminum Bullet, 60° Optics
Aluminum Bullet, 40° Optics
Aluminum Bullet, 15° Optics
Aluminum Bullet, No Optics
Brass Bullet, 60° Optics
Brass Bullet, 40° Optics
Brass Bullet, 15° Optics
Brass Bullet, No Optics
Copper Bullet, 60° Optics
Copper Bullet, 40° Optics
Copper Bullet, 15° Optics
Copper Bullet, No Optics
CATALOG NO.
DESCRIPTION DL-43-LEDM1560-BLT
DL-43-LEDM1540-BLT
DL-43-LEDM1515-BLT
DL-43-LEDM15WF-BLT
DL-43-LEDM1560-BRS
DL-43-LEDM1540-BRS
DL-43-LEDM1515-BRS
DL-43-LEDM15WF-BRS
DL-43-LEDM1560-COP
DL-43-LEDM1540-COP
DL-43-LEDM1515-COP
DL-43-LEDM15WF-COP
Aluminum Bullet, 60° Optics
Aluminum Bullet, 40° Optics
Aluminum Bullet, 15° Optics
Aluminum Bullet, No Optics
Brass Bullet, 60° Optics
Brass Bullet, 40° Optics
Brass Bullet, 15° Optics
Brass Bullet, No Optics
Copper Bullet, 60° Optics
Copper Bullet, 40° Optics
Copper Bullet, 15° Optics
Copper Bullet, No Optics
LAMP
11w LED Module
11w LED Module
11w LED Module
11w LED Module
11w LED Module
11w LED Module
11w LED Module
11w LED Module
11w LED Module
11w LED Module
11w LED Module
11w LED Module
LAMP
15w LED Module
15w LED Module
15w LED Module
15w LED Module
15w LED Module
15w LED Module
15w LED Module
15w LED Module
15w LED Module
15w LED Module
15w LED Module
15w LED Module
3.125”
78mm
Photometrics
114mm
CATALOG NO.
DL-45LEDM1560-BAR
15w LED Module
Brass
DL-42 | DL-43 | DL-45
DL-45-LEDM1540-BAR
15w LED Module
Brass
DL-44 SERIES LIGHT SPECIFICATIONS:
CONSTRUCTION: Extruded 2.25" square aluminum or brass bullet; matching die cast
adjustable swivel with 240° rotation
LENS: High impact clear tempered convex glass
GASKET: High temperature black silicone
LAMP SUPPLIED: 20w MR16 FL(BAB) 5000 hours average rating (50w max)
LAMP OPTIONS: We recommend 20w MR16 ULTRA10, 000 hours average rating;
20w MR16 TITAN 18, 000 hours average rating; 4w or 6w 50,000 hrs ARROW LED or 4w ARROW
Saver LED 40,000 hours average rating
SOCKET: High temperature ceramic GU5.3 bi-pin with 250°C silicone lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
(12/2, 10/2 or 8/2 only)
MOUNTING: FA-03 black 9" ABS stake threaded 1/2" NPS
FINISH: Aluminum - Black texture polyester powder coat. Optional finishes available.
Brass - Unfinished brass. Optional finishes available.
CATALOG NO. DESCRIPTION
DL-44-BLT
DL-44-BRS
DL-44TS-BLT
DL-44TS-BRS
DL-44-LED-CAM
4w ARROW MR16 LED (50w max.)
Aluminum
TERTEK
IN
46
L I ST E D
IP54
FOCUS
rrow
LEDS by
Square Aluminum Bullet
Square Brass Bullet
Tube Shield Square Aluminum Bullet
Tube Shield Square Brass Bullet
2.25"
5.5"
57mm
140mm
Recommended Enhancements FOR DL-42/43 SERIES:
FA-08-21
Round 1/4" Hex Cell Louver
FA-11-BLUE
Blue Tempered Glass Lens
FA-11-GREEN
Green Tempered Glass Lens
FA-11-AMBER
Amber Tempered Glass Lens
FA-11-RED
Red Tempered Glass Lens
FA-98
Linear Spread Tempered Glass Lens
FA-104-SB
Wide Spread Sandblasted Glass Lens Softener
DL-44
RXD-01-BAR SERIES SPECIFICATIONS:
Construction: Cast brass bullet, adjustable cast brass swivel with 240˚ rotation
Lens: High impact clear tempered convex glass
Lamp Supplied: 20w MR16 FL (BAB) 5000 hours average rating (50 w. max)
Lamp Options: 12v-We recommend 20w 10,000 hrs MR16 ULTRA, 20w 18,000 hrs TITAN
or 4w or 6w 50,000 hrs ARROW LED or 4w ARROW Saver LED 40,000 hours average rating
Socket: High temperature ceramic GU5.3 bi-pin with 250°C silicone lead wires
Wiring: Black 3 foot 18/2 SPT-1W from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
Connection: We recommend FA-05 Quick Connector (not supplied) from fixture to main
cable (12/2, 10/2 or 8/2 only) 12v only
Mount: FA-03 9" ABS stake threaded 1/2" NPS
Finish: Brass acid rust (-BAR) only
Catalog Number
Description
RXD-01-BAR
20w MR16 Cast Brass Bullet
5"
2.4"
127mm
9"
229mm
Recommended Enhancements FOR RXD-01 SERIES:
12v Lamp Options: See pages 143-144, 145 group E
FA-08-21
FA-11-BLUE
FA-11-GREEN
FA-11-AMBER
FA-11-RED
FA-98
FA-104-SB
61mm
12 volt
RXD-01-LED-BAR
4w ARROW MR16 LED (50w max.)
Cast brass bullet
Round 1/8" Hex Cell Louver
Blue Tempered Flat Glass Lens
Green Tempered Flat Glass Lens
Amber Tempered Flat Glass Lens
Red Tempered Flat Glass Lens
Linear Spread Tempered Glass Lens
Wide Spread Sand Blasted Glass Lens Softener
DIRECTIONAL LIGHTS
Same great FOCUS quality with a reduced price
RXD-01
LED
READY
FOCUS
rrow
TERTEK
IN
IP54
LEDS by
L I ST E D
RXD-02 series Specifications:
Construction: Unfinished copper bullet, adjustable cast brass swivel with 240˚rotation
or extruded aluminum bullet, adjustable cast aluminum swivel with 240˚ rotation
Lens: High impact clear tempered convex glass
Lamp Supplied: 20 w MR16 FL (BAB) 5000 hours average rating (35w max)
Lamp Options: 12v-We recommend 20w 10,000 hrs MR16 ULTRA, 20w 18,000 hrs TITAN or
4w or 6w 50,000 hrs ARROW LED or 4w ARROW Saver LED 40,000 hours average rating
Socket: High temperature ceramic GU5.3 bi-pin with 250°C silicone lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
Mount: FA-03 Black 8.5" ABS stake threaded 1/2" NPS
Finish: Copper: Unfinished copper
Aluminum – Black texture polyester powder coat, Optional finishes available
Catalog Number
Description
RXD-02-COP
RXD-02-BLT
20w MR16 Copper Bullet
20w MR16 Aluminum Bullet
5.25"
134mm
Recommended Enhancements FOR RXD-02 SERIES:
12v Lamp Options: See pages 143-144, 145 group E
FA-08-21
FA-11-33-BLUE
FA-11-33-GREEN
FA-11-33-AMBER
FA-11-33-RED
FA-98-33
FA-104-33-SB
LED
READY
Round 1/8" Hex Cell Louver
Blue Tempered Flat Glass Lens
Green Tempered Flat Glass Lens
Amber Tempered Flat Glass Lens
Red Tempered Flat Glass Lens
Linear Spread Tempered Glass Lens
Wide Spread Sand Blasted Glass Lens Softener
FOCUS
rrow
LEDS by
IP54
4.75"
2.125"
121mm
54mm
3.5"
1.77"
89mm
46mm
9"
9"
9"
229mm
229mm
229mm
RXD-02
TERTEK
IN
L I ST E D
5.25"
2.125"
RXD-03
RXD-02-LED-COP
4w ARROW MR16 LED (35w max.)
Copper bullet
4.75"
3.5"
1.4"
35mm
RXD-04
47
RXD-02 TUBE SHIELD series Specifications:
Construction: Unfinished copper tube shield bullet, adjustable cast brass swivel
with 240˚rotation or extruded aluminum tube shield bullet, adjustable cast
aluminum swivel
5.25"
2.125"
134mm
54mm
with 240˚ rotation
Lens: High impact clear tempered convex glass
Lamp Supplied: 20 w MR16 FL (BAB) 5000 hours average rating
(35w max copper/50w max aluminum)
Lamp Options: 12v-We recommend 20w 10,000 hrs MR16 ULTRA, 20w 18,000 hrs TITAN or
4w or 6w 50,000 hrs ARROW LED or 4w ARROW Saver LED 40,000 hours average rating
9"
229mm
Socket: High temperature ceramic GU5.3 bi-pin with 250°C silicone
lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
Mount: FA-03 Black 8.5" ABS stake threaded 1/2" NPS
RXD-02
Finish: Copper: Unfinished copper
Aluminum – Black texture polyester powder coat, optional finishes available page 8
Putting Green Lights
DIRECTIONAL LIGHTS
Same great FOCUS quality with a reduced price
Catalog Number
Description
RXD-02TS-COP
RXD-02TS-BLT
20w MR16 Copper Tube Shield Bullet
20w MR16 Aluminum Tube Shield Bullet
5.25"
134mm
4.75"
121mm
9"
229mm
RX
4.75"
2.125"
121mm
54mm
12 volt
Recommended Enhancements FOR RXD-02 SERIES:
12v Lamp Options: See pages 143-144, 145 group E
RXD-02TS-LED-COP
4w ARROW MR16 LED (35w max.)
Copper bullet
FA-08-21
FA-11-33-BLUE
FA-11-33-GREEN
FA-11-33-AMBER
FA-11-33-RED
FA-98-33
FA-104-33-SB
LED
READY
Round 1/8" Hex Cell Louver
Blue Tempered Flat Glass Lens
Green Tempered Flat Glass Lens
Amber Tempered Flat Glass Lens
Red Tempered Flat Glass Lens
Linear Spread Tempered Glass Lens
Wide Spread Sand Blasted Glass Lens Softener
rrow
FOCUS
LEDS by
9"
9"
229mm
229mm
RXD-02-TS
RXD
TERTEK
IN
IP54
L I ST E D
RXD-03 series Specifications:
Construction: Unfinished copper bullet, adjustable cast brass swivel with 240˚rotation
Lens: High impact clear tempered convex glass
Lamp Supplied: 20 wMR11 FL (FTD) 2000 hours average rating (35 w. max)
Lamp Options: We recommend 20w 10,000 hrs MR11 ULTRA, or 2w 50,000 hrs
ARROW MR11 LED
Socket: High temperature ceramic GU5.3 bi-pin with 250°C silicone lead wires
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
Mount: FA-03 Black 8.5" ABS stake threaded 1/2" NPS
Finish: Unfinished copper
5.25"
4.75"
2.125"
134mm
121mm
54mm
Catalog Number
Description
RXD-03-COP
20w MR11 Unfinished Copper Bullet
Recommended Enhancements FOR RXD-03 SERIES:
12v Lamp Options: See pages 143-144, 145 group F
9"
FA-08-17
Round 1/8" Hex Cell
Louver
229mm
FA-10-17-BLUE Blue Tempered Flat Glass Lens
FA-10-17-GREEN Green Tempered Flat Glass Lens
FA-98-17
Linear Spread Tempered Glass Lens
FA-104-17
Wide Spread Sand Blasted Glass Lens Softener
RXD-03-LED-COP
2w MR11 LED (35w max.)
Copper bullet
LED
READY
FOCUS
rrow
LEDS by
5.25"
134mm
IP54
2.125"
54mm
89mm
46mm
9"
9"
229mm
229mm
RXD-02
48
3.5"
1.77"
RXD-03
TERTEK
IN
L I ST E D
4.75"
121mm
1.77"
46mm
R
3.5"
89mm
4.75"
2.125"
3.5"
1.77"
121mm
54mm
89mm
46mm
Same great FOCUS quality with a reduced price
9"
RXD-03 TUBE SHIELD series Specifications:
229mm
9"
9"
229mm
229mm
Construction: Unfinished copper tube shield bullet, adjustable cast brass swivel with 240˚rotation
Lens: High impact clear tempered convex glass
Lamp Supplied RXD-03-TS: 20w MR11 FL(FTD) 2000 hours average rating (35 w. max)
Lamp Options RXD-03-TS: We recommend 20w 10,000
hrs MR11 ULTRA,
RXD-02
RXD-03
or 2w 50,000 hrs ARROW MR11 LED
Socket: High temperature ceramic GU5.3 bi-pin with 250°C silicone lead wires
Wiring: Black 3 foot 18/2 zip cord
Mount: FA-03 Black 8.5" ABS stake threaded 5.25"
1/2" NPS
4.75"
2.125"
1.77"
134mm
121mm
Finish: Unfinished copper
54mm
46mm
Description
RXD-03TS-COP
20w MR8 Unfinished Copper Bullet
Recommended Enhancements FOR RXD-03 SERIES:
9"
FA-08-17
Round 1/8" Hex Cell Louver
229mm
FA-10-17-BLUE Blue Tempered Flat Glass Lens
FA-10-17-GREEN Green Tempered Flat Glass Lens
FA-99-17
Clear Tempered Convex Glass Lens
FA-98-17
Linear Spread Tempered Glass Lens
RXD-02-TS
FA-104-17
Wide Spread Sand Blasted Glass Lens
Softener
LED
FOCUS
READY
rrow
9"
9"
229mm
L I ST E D
RXD-04 serieS specifications:
Construction: Unfinished copper bullet, adjustable cast brass swivel with 240˚rotation
Lens: High impact clear tempered convex glass
Lamp Supplied: 20 wMR8 NFL (23°) 2000 hours average rating (20 w. max)
Lamp Options: We recommend 1.5w 25,000 hrs ARROW MR8 LED
Socket: High temperature ceramic GU5.3 bi-pin with 250°C silicone lead wires
Wiring: Black 3 foot 18/2 zip cord
Mount: FA-03 Black 8.5" ABS stake threaded 1/2" NPS
Finish: Unfinished copper
Catalog Number
Description
RXD-04-COP
20w MR8 Unfinished Copper Bullet
RXD-04 TUBE SHIELD series Specifications:
RXD-04-LED-COP
1.5w MR8 LED (20w max.)
Copper bullet
Construction: Unfinished copper tube shield bullet, adjustable cast brass swivel with 240˚rotation
Lens: High impact clear tempered convex glass
Lamp Supplied RXD-04-TS: 20w MR8 NFL (23°) 2000 hours average rating (20 w. max)
Lamp Options RXD-04-TS: We recommend 1.5w 25,000 hrs wide flood MR8 LED
Socket: High temperature ceramic GU5.3 bi-pin with 250°C silicone lead wires
Wiring: Black 3 foot 18/2 zip cord
5.25"8.5" ABS2.125"
4.75"
3.5"
1.77"
Mount: FA-03 Black
stake threaded 1/2"
NPS
1.4"
134mm
121mm
89mm
54mm
46mm
35mm
Finish:5.25"
Unfinished copper
4.75"
3.5"
2.125"
1.77"
1.4"
134mm
121mm
89mm
54mm
46mm
Catalog Number
Description
RXD-04TS-COP
20w MR8 Unfinished Copper Bullet
Recommended Enhancements
FOR RXD-04/-TS SERIES:
9"
9"
FA-08-23 229mm
Round 1/8"Hex Cell Louver
229mm
FA-11-23-BLUE
Blue Tempered Glass Lens
FA-11-23-GREEN
Green Tempered9"
Glass Lens
9"
229mm
229mm
FA-98-23
Linear Spread Tempered
Glass Lens
FA-104-23
Wide Spread Tempered Glass Lens
Softener
RXD-02
RXD-03
35mm
9"
229mm
9"
229mm
RXD-04
RXD-04
RXD-02
5.25"
134mm
5.25"
RXD-04TS-LED-COP
1.5w MR8 LED (20w max.)
Copper bullet
READY
9"
229mm
121mm
54mm
4.75"
2.125"
134mm
LED
RXD-03
4.75"
2.125"
121mm
54mm
9"
IP54
RXD-02-TS
89mm
46mm
1.4"
35mm
9"
49
229mm
L I ST E D
229mm
1.4"
35mm
89mm
46mm
229mm
TEK
TER
IN
9"
RXD-04
3.5"
1.77"
9"
229mm
3.5"
1.77"
RXD-03-TS
RXD-04-TS
9"
229mm
RXD-04-TS
1
3
RXD-04-
TERTEK
IN
IP54
LEDS by
3.5"
89mm
229mm
RXD-03-TS
1
3
RXD-04
12 volt
RXD-03TS-LED-COP
2w ARROW MR11 LED (35w max.)
Copper bullet
Catalog Number
DIRECTIONAL LIGHTS
5.25"
134mm
RXD-08 series Specifications:
CONSTRUCTION: Machined brass cylinder with threaded cap & cast brass adjustable swivel
Lamp recessed 1" for extra glare protection
LENS: Clear tempered stepped glass
O-RING: High temperature red silicone
LAMP SUPPLIED: 20w MR16 FL(BAB) 5000 hours average rating (20w max)
LAMP OPTIONS: We recommend 20w MR16 ULTRA10, 000 hours average rating;
20 watt MR16 TITAN 18, 000 hours average rating; 4w or 6w 50,000 hrs ARROW LED or 4w ARROW
Saver LED 40,000 hours average rating
2.25" 2.25"
1.70" 1.70"
1.20 " 1.20 "
4.25" 4.25"
57mm
43mm temperature
31mmGU5.3
2.75"ceramic
2.875" 2.875"
57mm
43mm
31mmbi-pin with 250°C silicone lead wires
2.75"
SOCKET:
High
108mm 108mm
70mm
73mm
70mm
73mm
WIRING: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
CONNECTION: FA-05 Quick Connector (not supplied) from fixture to main cable
9"
9"
9"
9"
9"
229mm (12/2,
229mm 229mm
229mm
229mm 10/2 or 8/2 only)
MOUNTING: FA-03 black 9” ABS stake, tapped 1/2” NPS
FINISH:
Brass-Unfinished
brass.
Optional finishes available
RXD-08
RXD-09
RXD-10
RXD-08
RXD-09
RXD-10
RXD-08-LED-BRS
4w ARROW LED (20w max.)
Machined brass bullet
3.00"
2.25"
57mm6.125" 6.125"
4.25"
156mm
108mm
9"
9"
229mm
229mm
RXD-08
RXD-08
76mm
156mm
9"
9"
229mm
229mm
Catalog Number
3.00"
3.00"
76mm
2.875"
1.70"
76mm
7"
43mm
178mm
73mm
9"
229mm
RXD-08TS
RXD-08TS
RXD-09
RXD-08TS
9"
RXD-08-BRS
RXD-08TS-BRS
RXD-08AC-BRS
3.00"
Description
20w MR16 Cast Brass Bullet
20w MR16 Cast Brass Bullet w/Brass Tube Shield
20w MR16 Cast Brass Bullet w/Brass Angle Collar
76mm
7" 2.75"
178mm 70mm
1.20 "
FOCUS
Recommended Enhancements FOR RXD-03 SERIES:
FA-08-21
Round 1/8" Black Hex Cell Louver
FA-11-BLUE
Blue Tempered Flat Glass Lens
FA-11-GREEN
Green Tempered Flat Glass Lens
FA-11-AMBER
Amber Tempered Flat Glass Lens
FA-11-RED
Red Tempered Flat Glass Lens
FA-98-36C16
Linear Spread Tempered Glass Lens
FA-104-SB
Wide Spread Sand Blasted Glass Lens
31mm
9"
229mm229mm
RXD-08AC
RXD-08AC
RXD-10
RXD-08AC
LED
READY
rrow
LEDS by
TERTEK
IN
IP54
12 volt
9"
229mm
DIRECTIONAL LIGHTS
Same great FOCUS quality with a reduced price
L I ST E D
RXD-09 & RXD-10 series Specifications:
3.00"
3.00"
76mm
76mm
7"
6.125"
178mm
156mm
9"
9"
229mm
mm
RXD-08TS
RXD-08AC
RXD-09-LED-BAR
2w ARROW MR11 LED (35w max.)
Brass bullet on FA-24MDT Mount
Construction: Brass bullet, adjustable cast brass swivel with 240˚rotation
Lens: High impact clear tempered convex glass
Lamp Supplied RXD-09: 20w MR11 FL(FTD) 2000 hours average rating (35 w. max)
Lamp Supplied RXD-10: 20w MR8 NFL (23°) 2000 hours average rating (20 w. max)
Lamp Options: RXD-09:-We recommend 20w 10,000 hrs MR11 ULTRA, or 2w 50,000 hrs ARROW MR11 LED
Lamp Options: RXD-10:-We recommend 1.5w 25,000 hrs wide flood MR8 LED
Socket: High temperature ceramic GU5.3 bi-pin with 250°C silicone lead wires
Wiring: Black 3 foot 18/2 zip cord from base of fixture (12v only)
For 25 foot 16/2 fixture lead wire add -25F to catalog number.
Mount: FA-03 Black 8.5" ABS stake threaded 1/2" NPS
FINISH: Brass-Unfinished brass. Optional finishes available
Catalog Number
Description
RXD-09-BRS
RXD-10-BRS
20w MR11 Cast Brass Bullet
20w MR8 Cast Brass Bullet
Recommended Enhancements FOR RXD-09 SERIES:
FA-08-17
Round 1/8" Hex Cell Louver
FA-10-17-BLUE Blue Tempered Flat Glass Lens
FA-10-17-GREEN Green Tempered Flat Glass Lens
FA-99-17
Clear Tempered Convex Glass Lens
FA-98-17
Linear Spread Tempered Glass Lens
FA-104-17
Wide Spread Sand Blasted Glass Lens Softener
Recommended Enhancements FOR RXD-10 SERIES:
FA-08-23
Round 1/8"Hex Cell Louver
FA-11-23-BLUE
Blue Tempered Glass Lens
FA-11-23-GREEN
Green Tempered Glass Lens
FA-98-23
Linear Spread Tempered Glass Lens
FA-104-23
Wide Spread
Tempered2.25"
Glass Lens Softener
3.50"
RXD-10-LED-BAR
1.5w MR8 LED (20w max.)
Brass bullet
FOCUS
LED
READY
89mm
57mm
2.875"
1.70"
2.75"
43mm
1.20 "
31mm
70mm
73mm
rrow
LEDS by
IP54
TERTEK
IN
L I ST E D
9"
9"
9"
229mm
229mm
229mm
RXD-08
RXD-09
RXD-09
50
RXD-10
RXD-10

Download Report