Apeks 2015 - Aqua Master

2014 / 2015
www.aquamaster.net
GENERAL TERMS & CONDITIONS OF SALES
AQUA MASTER (Thailand) Co., Ltd.
43 / 30-32 Moo 5, T. Rawai,
A. Muang Phuket 83130
Telephone: Fax:
e-mail:
Web:
(+66) 076 281 227, 076 383 245
(+66) 076 281 073
[email protected]
www.aquamaster.net
PURCHASING AND SHIPPING OF ORDERS
• AQUA MASTER (Thailand) Co., Ltd. is the appointed sub-distributors for Apeks in the South of Thailand.
• Apeks products in Thailand can be purchased from local sub-distributors and their authorised dealers.
PRICING TERMS AND POLICY
• Prices are recommended retail prices including VAT.
• All prices are subject to change without notice.
OTHER TERMS
• Apeks products purchased by an Authorized Dealer and then resold to an unauthorized reseller are
considered “third party sales” and are not allowed.
• Apeks products sold to end users by an unauthorized reseller may forfeit the end user certain rights
and warranties to the products as allowed by law.
• The Authorized Dealer will provide warranty and non-warranty service for all Apeks products purchased
by any end user having legitimate proof of purchase from an
Authorized Apeks Dealer located anywhere in the world.
INDEX
Page 3-8
Standard Regulator Sets
Page 9-10
Nitrox, TEK3 & Sidemount Regulator Kit
Page 11-13
First Stages
Page 14-16
Second Stages
Page 16-18
Alternate Air Sources
Page 18-21
Accessories
Page 21-25
Stage 3 & 4 Sets
Page 26-27
Instruments
Page 28-35
BCDs
2 | APEKS
A peks re g ulat o rs
XTX Regulators
The Apeks XTX range of regulators has a reputation for quality, performance and features. From the high-end Tungsten models to the entry level XTX20, you will breathe
easy and with great confidence. Each XTX model has something unique and special to
offer but there are many features found throughout the entire line up.
• The pneumatically-balanced 2nd stages provide left / right reversibility so you can customize
your rig to suit your needs.
• Diver Changeable Exhaust (DCE) System allows for different length exhaust tees.
• Braided flexi hoses are now standard on all models. These hoses are lighter weight, more
flexible and more durable
• Following on the success of the anti-bacterial mouthpiece, anti-bacterial additive has now been
molded into most second stage components. This is especially useful with shared equipment
by providing added protection against bacteria.
• The purge buttons are now larger and easier to operate. A 2-stage progressive purge is used.
Press the purge on the side for a lower flow rate, useful where more control is required such as
filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator
clearing etc.
• A new larger venturi lever has been added with a soft touch rubber grip, which makes it easier
to locate and use
• Compatible to EAN40 when new, straight out of the box.•
REGULATORS | 3
A peks re g ulat o rs
Tungsten XTX
The XTX Tungsten is built upon the XTX200 platform but with a truly unique, added
feature: it is protected with a hard, durable PVD (Physical Vapor Deposition) finish. This
tough-as-nails finish is better than traditional chrome plating. The coating is made of
high quality grades of Titanium, Zirconium and Chromium. The result is not only rich,
but protects your investment from normal diving abuse.
• Features the innovative Diver Changeable Exhaust (DCE) System allowing the diver to change
from a large exhaust tee to a smaller exhaust tee. The larger exhaust tee provides the best
exhaust bubble dispersion while the smaller tee is lighter weight and compact, both are
included with the regulator.
• The XTX Tungsten can be converted from a right handed hose configuration to a left handed
one. The process of changing the regulator to a left handed configuration is both quick and
simple. However this procedure MUST only be performed by an Apeks Authorized Service
Technician
• The ergonomic venturi lever of the XTX range has been designed to reduce the amount of
grit ingress
• Available in yoke or din configuration
• The silicone exhaust valve used on the XTX demand regulator range improves the breathing
performance of the regulator.
• Compatible with EAN40 new, out of the box
Part #
Description
AP0335F
Tungsten XTX - Yoke
Retail
32,990.00
THB
AP0335F-1
Tungsten XTX - DIN
32,990.00
XTX200
The XTX 200 is the flagship of the Apeks Regulator range and the definitive blend of
style and high performance.
Every detail has been carefully designed to offer a high quality piece of equipment.
• Uses the proven “FSR” type first stage as found on the ATX200 and Tungsten models
• Features a bright chrome finish
• All medium pressure ports are now 3/8” so that the reversible XTX second stage can mount
to either side of the first stage
• The over-balancing feature allows the medium pressure air in the hose to increase at a rate
faster than ambient pressure resulting in superior performance
• Comes standard with an environmental dry kit which keeps water and contaminants out as
well as makes the model more resistant to freezing
• Compatible to EAN 40, new, out of the box
• Although shipped in a standard right-hand configuration, this second stage can be reversed
into a left-hand configuration by an Authorized Apeks Technician.
• Features new Diver Changeable Exhaust (DCE) System. This system gives the diver the ability
to change from a large exhaust tee to a smaller exhaust tee. The large tee provides the best
exhaust bubble dispersion; the smaller tee is lighter weight and compact. The regulator
comes with both sets of exhaust tees
• Improved exhalation performance and overall work of breathing
• This pneumatically balanced second stage has diver-adjustable controls for opening effort
and venturi control
• Suitable for coldwater use
Part #
Description
AP0334F
XTX200 - Yoke
28,990.00
AP0334F-1
XTX200 - DIN
28,990.00
4 | REGULATORS
Retail
THB
A peks re g ulat o rs
XTX100
Sharing the same technical features with the XTX 200, the XTX 100 offers exceptional performance.
• Molded environmental diaphragm
• Satin chrome finish
• All medium –pressure ports are now 3/8” so that the reversible XTX second stage can mount to either side
of the first stage
• The over-balancing feature allows the medium pressure air in the hose to increase at a rate faster than
ambient pressure resulting in superior performance
• Comes standard with an environmental dry kit which keeps water and contaminants out as well as makes
the model more resistant to freezing
• Compatible to EAN 40, new, out of the box
• Although shipped in a standard right-hand configuration, this second stage can be reversed into a left-hand
configuration by an authorized technician
• Features the innovative Diver Changeable Exhaust (DCE) System allowing the diver to change from a large
exhaust tee to a smaller exhaust tee. The larger exhaust tee provides the best exhaust bubble dispersion
while the smaller tee is lighter weight and compact, both are included with the regulator.
• Improved exhalation performance and overall work of breathing
• This pneumatically balanced second stage has diver-adjustable controls for opening effort and venturi
control.
• Suitable for coldwater use
Part #
Description
AP0333F
XTX100 - Yoke
Retail
27,990.00
THB
AP0333F-1
XTX100 - DIN
27,990.00
XTX50
The XTX50 Regulator is for the diver who wants the benefits of a feature-rich regulator
at a moderate price.
• This popular first stage has four medium-pressure ports all mounted on a rotating turret. This results in optimal hose routing while eliminating sharp bends in the hose
• The first stage is over-balanced resulting in a higher medium pressure at each depth. This
translates to a very responsive, easy breathing regulator.
• Since this pneumatically balanced second stage is part of the XTX family, it has left /right
reversibility providing multiple regulator configurations
• Features the innovative Diver Changeable Exhaust (DCE) System allowing the diver to change
from a large exhaust tee to a smaller exhaust tee. The larger exhaust tee provides the best
exhaust bubble dispersion while the smaller tee is lighter weight and compact, both are
included with the regulator.
• Using the venturi control lever, the diver can prevent unwanted free flow when the regulator
is out of the mouth and achieve a venturi boost while diving
• Easy-to-grip opening effort control knob
• Suitable for cold water use
• Compatible to EAN 40 new, out of the box
Part #
Description
AP0332F
XTX50 - Yoke
Retail
23,990.00
THB
AP0332F-1
XTX50 - DIN
23,990.00
REGULATORS | 5
A peks re g ulat o rs
XTX40
Although the XTX 40 is a mid-range Apeks regulator, it is still classed as a high
performance regulator in independent reviews. The XTX 40 comes with all the
features of our highly successful XTX 50 with the exception of diver adjustable
breathing resistance control.
• Same first stage as found on the XTX50
• XTX pneumatically balanced second stage has left/right reversibility and a Diver Changeable Exhaust (DCE) system. Only the compact exhaust tee is supplied
• Integrated venturi control
• Suitable for coldwater use
• Compatible to EAN40 new, out of the box
Part #
Description
AP0331F
XTX40 - Yoke
Retail
21,990.00
THB
AP0331F-1
XTX40 - DIN
21,990.00
XTX20
This regulator has the performance of the XTX 40 without the cold water features.
Well suited for warm water conditions and an exceptional value.
• First stage is a balanced diaphragm type that has four 3/8” medium-pressure ports and
one 7/16” high-pressure port
• Designed for water above 50º F (10º C)
• New XTX pneumatically balanced second stage has left/right reversibility and a Diver Changeable Exhaust (DCE) system. Only the compact exhaust tee is supplied
• Integrated venturi control
• Compatible to EAN 40, new, out of the box
Part #
Description
AP0330F
XTX20 - Yoke
15,990.00
AP0330F-1
XTX20 - DIN
15,990.00
6 | REGULATORS
Retail
THB
A peks re g ulat o rs
ATX40 with DS4 1st stage
A fully balanced regulator, first and second stage, at an entry level price.
• High performance regulator that boasts an over-balanced first stage with a
pneumatically balanced second stage
• Four medium pressure ports and one high pressure port
• The first stage is dry sealed keeping all internal components protected from
the environment
• The 2nd stage uses a pneumatically balanced valve system for excellent
breathing
• Due to the ATX 40’s high efficiency heat exchanger system, it can cope with
even the coldest conditions without freezing, making it the perfect all around
regulator
• The ATX40 has an ergonomically designed control for the venturi that enables
you to control the airflow within the second stage at the turn of a lever
• Comes standard with the Comfo-bite mouthpiece for increased comfort
• Compatible to EAN 40, new, out of the box
Part #
Description
AP0540/DS4
ATX40 - Yoke
Retail
15,490.00
THB
AP0540/DS4-1
ATX40 - DIN
15,490.00
AT20
The AT20 is the predecessor to the XTX20. We brought it back to the Apeks line-up
because it represents an excellent value. This is an ideal entry-level regulator that
can spoil sport divers in a hurry.
•
•
•
•
•
The first stage is a balanced diaphragm design
The first stage has 1 high pressure port and 4 medium pressure ports
The 2nd stage uses a pneumatically balanced valve system for excellent breathing
It is designed for water temperatures above 50°F (10°C)
The AT20 has an ergonomically designed control for the venturi that enables you to
control the airflow within the second stage at the turn of a lever
• Comes standard with the Comfo-bite mouthpiece for increased comfort
• Compatible to EAN 40, new, out of the box
Part #
Description
AP0545C/US4
AT20/US4 - Yoke
Retail
12,790.00
THB
AP0545C-1/US4
AT20/US4 - DIN
12,790.00
REGULATORS | 7
A peks re g ulat o rs
Flight
When we first decided to make the world’s lightest regulator, we
started with a blank canvas and looked at every aspect including
materials, shape, form and function. We have combined our expertise and the vast archive of knowledge we have built up over the
years, making the finest regulators, to produce the Flight.
Apeks is known throughout the world for dive equipment of quality,
craftsmanship and durability. Due to innovative design and the use
of advanced materials, Flight regulators meet our high standards.
They are tough, reliable and strong enough to cope with the demands and rigors of traveling. Flight is suitable for diving in water
with a temperature above 50°F / 10°C. This is perfect for those warmer, exotic travel destinations, but we confirm it is equally suitable for
waters as cold as 50°F / 10°C. They are the most compact Apeks
regulators ever made – small yet fully loaded with high performance
and comfort. Flight is ideal for every dive journey from a visit to your
local dive site to an exotic trip overseas.
Twilight
• High strength forged, lightweight, brass skeletal body
• The components utilize new engineering grade composite materials to
create an extremely light weight but tough and hard wearing regulator
• Total weight of Flight - 25oz./708 grams (yoke) & 21oz./589 grams (DIN
300 bar)
• Balanced diaphragm first stage
• Nitrox compatible to 40% O2 (EAN40) when new, out of the box
• 4 MP ports & 2 HP ports
• Compatible with hose-less computer transmitters
• Optimum hose positions
• Tool-free second stage swivel fitting - avoids any damage that could
occur to the second stage from over-torqueing the hose
• Pneumatically-balanced second stage
• Large controlled purge button for ease of use
• Venturi control to prevent free flows when out of the mouth
• Lightweight, flexible, braided hose
• The unique yoke knob is designed to minimize entanglements by not
extending outward as it is unscrewed. This also keeps the regulator
compact
Pewter
Pink
Part #
Description
AP0370TL
Flight - Yoke
Twilight
22,390.00
AP0370-1TL
Flight - DIN
Twilight
22,390.00
AP0370
Flight - Yoke
Pewter
22,390.00
AP0370-1
Flight - DIN
Pewter
22,390.00
AP0370P
Flight - Yoke
Pink
22,390.00
AP0370-1P
Flight - DIN
Pink
22,390.00
8 | REGULATORS
Retail
THB
A peks re g ulat o rs
XTX40 OXYGEN DIN
Now you can get XTX technology in an oxygen model. This regulator is built for oxygen percentages
between 40 – 100%. This compatibility coupled with its excellent reliability make it the choice for
technical divers doing high O2 percentage deco stops.
• This first stage with swivel turret has two high-pressure ports and four medium-pressure ports
• Green and yellow cosmetic pieces clearly identify that this regulator is dedicated for high-percentage
oxygen use
• The first stage is dry-sealed preventing the entry of contaminants as well as ice formation on the main
spring
• The XTX40 second stage is pneumatically balanced for very easy breathing
• Due to its innovative Reversible Venturi System (RVS), the second stage can be configured into a right
hand or left hand orientation
• The venturi lever is easy to use even with the thickest of gloves
• Suitable for cold water use
WARNING
Do not attempt to use this product with enriched air until you have obtained training in nitrox use
with mixtures containing over 40% O2 by volume, from a nationally recognized training agency.
Part #
Description
NP0331F-1
XTX40 NITROX - DIN
Retail
THB
22,390.00
Tek 3 Regulator Set
Apeks has developed unique first stages specifically for use on a twinset. The benefits of this award winning
system are: minimized risk of accidental snagging, no hose kinking and easier access to the manifold valves.
Each first stage has three medium pressure ports and one high pressure port. They are over-balanced, cold
water compatible and extremely robust. TEK 3 looks great too. Not only is the TEK 3 suitable for twinset use
but it is equally suitable for single cylinder or stage cylinder configurations offering perfect, snag-free hose
positioning.
For those that already own two Apeks regulators and would like to take advantage of the Tek 3 first stages,
AP0367-1, TEK 3 SET, FIRST STAGES, includes: a LH Tek 3 first stage and a RH Tek 3 first stage in one box.
• The TEK3 utilizes all of the proven technology contained within the Apeks range of first stage regulators
• The 1st stages have three medium pressure 3/8” UNF ports and one high pressure 7/16” UNF port. The ports are arranged so as to give a neat streamlined hose configuration as desired by the technical diver
• Allows maximum unrestricted accessibility to the cylinder valves when using a twin cylinder set up
• The set includes 1 ea. standard regulator hose, 1 ea. 2m regulator hose and a regulator necklace
• The TEK3 is available only in DIN versions. Both models use the all metal hand wheel. The metal hand wheel provides
both an improved grip and nice aesthetic look to the regulator
• Compatible with EAN40 when new, out of the box
• Outstanding cold water performance
• The 2nd stages in the set are the popular XTX50 2nd stages
Part #
Description
AP0332F-1-SET
TEK 3 Set DIN Complete
Retail
49,990.00
THB
AP0367-1
TEK 3 Set of 1 Left Hand and 1 Right Hand First Stage
27,300.00
REGULATORS | 9
A peks re g ulat o rs
Sidemount Regulator Kit
As sidemount diving continues to grow, Apeks answers the need to deliver a kit that
contains all of the necessary hardware and accessories, along with two of their awardwinning
XTX50 regulators, that will be convenient for the sidemount diver and save him
money along the way. Everything a diver needs for a sidemount breathing system is
found in this kit.
Kit contents:
• 2 ea. XTX50 DIN regulators with 5 port swivel turrets
One XTX50 has a 83” / 210cm hose
One XTX50 has a 24” / 60cm hose
• 2 ea. custom length MP inflation hoses (one for buoyancy system, one for drysuit)
• 2 ea. brass pressure gauges with 6 inch hoses (units in BAR)
• 1 ea. 90° elbow fitting
• 1 ea. bungee necklace
• 1 ea. stainless steel clip
• 2 sets of short exhaust ports
• Regulator bag to hold all
• Setup illustration, CD manual and quick start guide
Part #
Description
AP0100F
Sidemount Regulator Kit
10 | REGULATORS
Retail
THB
59,990.00
A peks re g ulat o rs
FSR First Stage
Standard first stage of XTX200
•
•
•
•
•
Over-balanced diaphragm design
Environmentally dry sealed system
2 high pressure port and 4 medium pressure ports
Compact without swivel turret design
Suitable for cold water use
Part #
Description
AP0363F
FSR XTX200 First Stage A-clamp
15,850.00
AP0363F-1
FSR XTX200 First Stage DIN
15,850.00
WARNING
Retail
THB
FST First Stage
Standard first stage of XTX100
•
•
•
•
•
Over-balanced diaphragm design
Environmentally dry sealed system
2 high pressure port and 4 medium pressure ports
Compact without swivel turret design
Suitable for cold water use
Part #
Description
AP0362F
FST XTX100 First Stage A-clamp
Retail
15,460.00
THB
AP0362F-1
FST XTX100 First Stage DIN
15,460.00
DST4 First Stage
Standard first stage of XTX40 and XTX50
•
•
•
•
•
Over-balanced diaphragm design
Environmentally dry sealed system
2 high pressure port and 4 medium pressure ports
Swivel Turret
Suitable for cold water use
Part #
Description
AP0361F
DST4 First Stage A-clamp
Retail
14,260.00
THB
AP0361F-1
DST4 First Stage DIN
14,260.00
REGULATORS | 11
A peks re g ulat o rs
5 Port Upgrade Kits
Upgrades DST4, UST4 , FST & FSR First Stages
• For p/n AP02741, it may only be used on the current
“face-lifted” models that debuted in 2013.
Part #
Description
AP0274
for DST / UST 1st stages
Retail
1,590.00
THB
AP0274/1
for FST & FSR 1st stages
1,720.00
TEK3 First Stages
Standard first stages of TEK3 Set
•
•
•
•
•
•
Over-balanced diaphragm design
Environmentally dry sealed system
Left Hand & Right Hand design
1 high pressure port and 3 medium pressure ports
Compact without swivel turret design
Outstanding cold water performance
Part #
Description
AP0367-1
TEK3 Left Hand & Right Hand First Stages Set DIN
Retail
27,300.00
THB
AP0366-1-L
TEK3 Left Hand First Stage DIN
15,170.00
AP0366-1-R
TEK3 Right Hand First Stage DIN
15,170.00
DS4 First Stage
Standard first stage of XTX50/DS4
•
•
•
•
Over-balanced diaphragm design
Environmentally dry sealed system
1 high pressure port and 4 medium pressure ports
Suitable for cold water use
Part #
Description
AP0527
DS4 First Stage A-clamp
9,090.00
AP0528
DS4 First Stage DIN
9,090.00
12 | REGULATORS
Retail
THB
A peks re g ulat o rs
UST4 First Stage
Standard first stage of XTX20
•
•
•
•
Balanced diaphragm design
2 high pressure port and 4 medium pressure ports
Swivel Turret
It is designed for water temperatures above 50°F (10°C)
Part #
Description
AP0360F
UST4 First Stage A-clamp
Retail
12,590.00
THB
AP0360F-1
UST4 First Stage DIN
12,590.00
US4 First Stage
Standard first stage of AT20
•
•
•
•
Balanced diaphragm design
1 high pressure port and 4 medium pressure ports
Compact without swivel turret
It is designed for water temperatures above 50°F (10°C)
Part #
Description
AP0517
US4 First Stage A-clamp
Retail
6,940.00
THB
AP0518
US4 First Stage DIN
6,940.00
Flight First Stage
Standard first stage of Flight
•
•
•
•
•
•
Balanced diaphragm design
High strength forged, lightweight, brass skeletal body
4 MP ports & 2 HP ports
Compatible with hose-less computer transmitters
Optimum hose positions
It is designed for water temperatures above 50°F (10°C)
Part #
Description
AP0810
Flight First Stage A-clamp
Retail
12,420.00
THB
AP0810-1
Flight First Stage DIN
12,420.00
REGULATORS | 13
A peks re g ulat o rs
XTX200/100 Second Stage
•
•
•
•
•
•
•
•
•
•
•
Adjustable cracking control
Integrated venturi control
Pneumatically balanced valve design
Micro Adjuster
Bright Chrome Finish
Right or Left hand hose configuration
Metal Inserted front cover
New Optional Extra Hose Swivel connection
Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied)
Identical to the XTX100 except for model number decal
Suitable for cold water use
Part #
Description
AP0353F/2
XTX200 Second Stage Without Hose
Retail
13,790.00
THB
AP0353F/1
XTX100 Second Stage Without Hose
13,790.00
XTX50 Second Stage
•
•
•
•
•
•
•
•
•
Adjustable cracking control
Integrated venturi control
Pneumatically balanced valve design
Micro Adjuster
Bright Chrome Finish
Right or Left hand hose configuration
Two shot plastic front cover
Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied)
Suitable for cold water use
Part #
Description
AP0352F
XTX50 Second Stage Without Hose
Retail
THB
10,390.00
XTX40 Second Stage
•
•
•
•
•
•
•
•
•
Integrated venturi control
Pneumatically balanced valve design
Bright Chrome Finish
Right or Left hand hose configuration
Two shot plastic front cover
Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (only one set supplied)
New Optional Extra Hose Swivel connection
Nitrox and Octopus versions available
Suitable for cold water use
Part #
Description
AP0351F
XTX40 Second Stage Without Hose
14 | REGULATORS
Retail
THB
8,690.00
A peks re g ulat o rs
ATX40 Second Stage
•
•
•
•
•
•
•
Pneumatically balanced system - reduces breathing effort
Integrated Venturi Control
Extremely efficient exhaust valve
Compact integrated exhaust
25% lighter than TX models
Comfo Bite mouthpiece - for comfort and to reduce jaw fatigue
Suitable for cold water use
Part #
Description
AP0541C
ATX40 Second Stage Without Hose
Retail
THB
8,690.00
XTX20 Second Stage
•
•
•
•
•
•
•
•
Integrated venturi control
Pneumatically balanced valve design
Bright Chrome Finish
Two-shot plastic front cover
Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (only one set supplied)
New Optional Extra Hose Swivel connection
Octopus version available
Designed for water temperatures above 50°F (10°C)
Part #
Description
AP0350F
XTX20 Second Stage Without Hose
Retail
THB
6,490.00
AT20 Second Stage
•
•
•
•
•
•
•
Pneumatically balanced system - reduces breathing effort
Integrated Venturi Control
Extremely efficient exhaust valve
Compact integrated exhaust
25% lighter than TX models
Comfo Bite mouthpiece - for comfort and to reduce jaw fatigue
Designed for water temperatures above 50°F (10°C)
Part #
Description
AP0507 Bk
AT20 Second Stage Without Hose
Retail
THB
6,490.00
REGULATORS | 15
A peks re g ulat o rs
Flight Second Stage
•
•
•
•
•
•
•
•
•
•
Integrated Venturi System (IVS)
Pneumatically balanced valve design
Large tough purge
Purge operation unaffected by temperature change
Excellent bubble diversion
Neutrally buoyant
Colour selection ( pewter, green, pink )
Male and female versions
Weight - 127g (4.5oz)
Designed for water temperatures above 50°F (10°C)
Part #
Description
AP0811
Flight Second Stage Without Hose
Retail
THB
7,590.00
Flight Octopus
This is the perfect compliment to the Flight regulator. It doesn’t make sense to have
the world’s smallest, lightest regulator and a big, bulky octopus.
•
•
•
•
•
•
Extremely compact and lightweight at 4.5oz / 127g yet remains neutrally buoyant
Pneumatically balanced for excellent performance
Uses a large, soft-touch purge
Integrated Venturi System (IVS) with an ergonomic control lever
Lightweight, flexible, braided hose in high visibility yellow
Designed for water temperatures above 50°F (10°C)
Part #
Description
AP0385/M
Flight Octopus Male With Yellow Hose
Retail
8,890.00
THB
AP0385/F
Flight Octopus Female With Yellow Hose
8,890.00
Egress Octopus
Innovative, low profile design minimizes drag. The pneumatically balanced valve
provides superior performance for an alternate air source, making it a perfect
complement to the high performing Apeks regulators.
• Unique 120˚ angle between the mouthpiece and the hose, which is ideal for sharing air with your buddy
• Breathes smoothly when positioned right side up or upside down
• High visibility 36” lightweight, flexible, braided yellow hose distinguishes your Egress hose from your
primary hose and is easily spotted in the event of an out-of-air emergency
• Suitable for cold water use
Part #
Description
AP0756
Egress Octopus With Yellow Hose
16 | REGULATORS
Retail
THB
8,890.00
A peks re g ulat o rs
XTX50 Octopus
• This octopus is based upon the XTX50 second stage mentioned previously
• It includes left / right reversibility and the performance you would expect from an Apeks
pneumatically balanced valve
• Diver-adjustable controls for opening effort and venturi control
• The unit has a high visibility yellow front cover, yellow accent pieces and a 36” high visibility,
lightweight, flexible, braided yellow hose
• Comes standard with small exhaust tee
• Suitable for cold water use
Part #
Description
AP0342F/Y
XTX50 Octopus With Yellow Hose
Retail
THB
10,890.00
XTX40 Octopus
• This octopus is based upon the XTX40 second stage mentioned previously
• It includes left / right reversibility and the performance you would expect from an Apeks
pneumatically balanced valve
• Diver-adjustable venturi control
• The unit has a high visibility yellow front cover, yellow accent pieces and a 36” high visibility,
lightweight, flexible, braided yellow hose
• Comes standard with small exhaust tee
• Suitable for cold water use
Part #
Description
AP0341F/Y
XTX40 Octopus With Yellow Hose
Retail
THB
8,890.00
ATX40 Octopus
• The ATX40 octopus is smaller and 25% lighter than its TX predecessor. This results
in less jaw fatigue and less drag.
• This pneumatically balanced octopus is ideally suited for an over-balanced Apeks
first stage.
• The diver has full control of the venturi by means of a lever so as to prevent accidental
freeflow when the octopus is not being used.
• The excellent cold water performance of this octopus is due to the highly efficient
heat exchanger on the second stage.
• High visibility 36” yellow hose and high visibility yellow cover
Part #
Description
AP0506C/Y
ATX40 Octopus With Yellow Hose
Retail
THB
7,290.00
REGULATORS | 17
A peks re g ulat o rs
XTX20 Octopus
• This octopus is based upon the XTX20 second stage mentioned previously
• It includes left / right reversibility and the performance you would expect from an Apeks
pneumatically balanced valve
• Diver-adjustable venturi control
• The unit has a high visibility yellow front cover, yellow accent pieces and a 36” high visibility,
lightweight, flexible, braided yellow hose
• Comes standard with small exhaust tee
• Designed for water temperatures above 50º F (10º C)
Part #
Description
AP0340F/Y
XTX20 Octopus With Yellow Hose
Retail
THB
6,990.00
AT20 Octopus
•
•
•
•
•
•
This is the predecessor to the XTX20 Octopus
Represents an excellent value
This pneumatically balanced octopus is ideally suited for an over-balanced Apeks first stage
Diver-adjustable venturi control
The unit has a high visibility yellow front cover, yellow accent pieces and a 36” yellow hose
Designed for water temperatures above 50º F (10º C)
Part #
Description
AP0507C/Y
AT20 Octopus With Yellow Hose
Retail
THB
6,190.00
Regulator Necklace Kit
• Durable silicone
• Secures the second stage in front of you
Part #
Description
AP0480/K
Regulator Necklace Kit
18 | REGULATORS
Retail
THB
1,190.00
A peks re g ulat o rs
Freeflow Control Device
•
•
•
•
•
Isolates freeflowing 2nd stages
Guards against unexpected air loss
Improves diver safety
Gives total control of a frozen 2nd stage
Fits any 2nd stage with standard hose fitting
Part #
Description
AP0233
Freeflow Control Device
Retail
THB
2,390.00
1/2” TO 3/8” Adaptor
• Converts the 1/2” port of previous TX and ATX regulators to 3/8”
Part #
Description
AP3020/2/K
1/2” TO 3/8” Adaptor Pack
Retail
THB
680.00
DIN to YOKE Converter
• Allows you to quickly and easily convert your existing DIN connector to yoke without the
need for tools
Part #
Description
AP0195
Din to Yoke Converter
Retail
THB
3,460.00
DIN & A-Clamp Kits
• Allows you to replace your existing yoke connector
• Available in co-molded, bright chrome or satin finish
AP0620
AP0211
AP0211/S
AP0211-A
Retail
THB
Part #
AP0620-A
Desscription
AP0211/S-A
Part #
Description
AP0371
DIN Kit - Flight
4,420.00 AP0372
A-Clamp Kit - Flight
4,420.00
AP0620
DIN Kit - Co-molded
2,690.00 AP0620-A
A-Clamp Kit - Co-molded
2,690.00
AP0211
DIN Kit - Chrome
2,990.00 AP0211-A
A-Clamp Kit - Chrome
2,990.00
AP0211/S
DIN Kit - Satin
2,990.00 AP0211/S-A
A-Clamp Kit - Satin
2,990.00
AP0211/PVD-A A-Clamp Kit - PVD
Retail
THB
3,460.00
REGULATORS | 19
A peks re g ulat o rs
Anti-Bacterial Mouthpiece
With Non-Toxic silver ion additive, which reduces viruses and other bacteria by 99 %
• Kills Staphylococcus Aureus commonly known as MRSA
• Protective against Escherichia Coli and 23 other strains of bacteria and 4 types of fungi
• Effective against viruses, mould, yeast, algea
• Comes in display pack with cable tie
Part #
Description
AP5324/K
Anti-Bacterial Comfo Mouthpiece Pack
Retail
THB
580.00
Coloured Mouthpiece Kit
Mouthpiece kit with 4 different colours
• Helps to identify your second stages
• Comes in display pack with cable ties
Part #
Description
AP1434/K
Coloured Mouthpiece Kit
Retail
THB
1,780.00
Dust Caps
• Protect the first stage from dust and water
• A-clamp style with flexible rubber
• DIN protector with thread
Part #
Description
AP6202/K
DIN Protector Pack
Retail
440.00
THB
AP1404/K
Dust Cap Pack
280.00
Hose Protectors
• Protect the weakest area of the hose
• Internal draining channels
Part #
Description
AP1461
Hose Protector Black
180.00
AP1461/Y
Hose Protector Yellow
180.00
20 | REGULATORS
Retail
THB
A peks re g ulat o rs
Lighweight Flexible & Traditional Hoses
• All hoses are manufactured at the Apeks factory
• Lightweight flexible hoses withstand a burst pressure
more than twice that of traditional hoses
• 3/8 standard size or 1/2 available at the same price
• Seatec inflator hose fits all Aqualung BCs
Part #
Description
AP0203/1
Regulator Hose
Retail
THB Part #
2,820.00 AP0198
Desscription
Retail
THB
2,980.00
Flexi Hose
AP0203/1-1.5MTR Regulator Hose 1,5 MTR
3,870.00 AP0198/1.5MTR Flexi Hose 1,5 MTR
3,870.00
AP0203/1-2.1MTR Regulator Hose 2,1 MTR
4,570.00 AP0198/2.1MTR Flexi Hose 2,1 MTR
4,570.00
AP0203/1/J/K
Swivel Reg Hose (boxed)
4,080.00 AP0198/J/K
Flex Swivel Reg Hose (boxed)
4,080.00
AP0206
Octopus Hose
2,980.00 AP0199
Flexi Octopus Hose
2,980.00
AP0153
Inflator Hose Seatec
2,790.00 AP0137
Flexi Inflator Hose Seatec
2,790.00
AP0901
High Pressure Hose
2,560.00 AP0904
APEKS “STAGE 3” SETS
Flexi High Pressure Hose
3,010.00
AP0200
Flight Regulator Hose
3,070.00
AP0201
Flight Octopus Hose
3,280.00
LOWEST PRICE ON
“STAGE” SETS
“STAGE 4” SETS
US4 / AT20 with AT20 Octopus
US4 1st Stage
• Balanced diaphragm design
• Designed for water above 50º F (10º C)
AT20 2nd Stage
• Pneumatically balanced
• Diver-adjustable venturi control
• Designed for water above 50º F (10º C)
AT20 Octopus
• Pneumatically balanced
• Diver-adjustable venturi control
• Designed for water above 50º F (10º C)
Part #
Description
AP0588C/US4
US4/AT20 Stage 3 A-clamp
Retail
18,220.00 AP0588C/US4/4-1
THB Part #
Stage 4 - Pressure
21,320.00
AP0588C-1/US4
US4/AT20 Stage 3 DIN
18,220.00 AP0588C/US4/4-2
Stage 4 - Pressure / Depth
24,420.00
Stage 4 - Triple Console
26,390.00
AP0588C/US4/4-3
Desscription
Retail
THB
REGULATORS | 21
A peks re g ulat o rs
LOWEST PRICE ON
“STAGE” SETS
APEKS "STAGE 3” SETS
"STAGE 4” SETS
DS4 / ATX40 with ATX40 Octopus
DS4 1st Stage
• Over-balanced diaphragm design
• Compact design
• Dry-sealed, over-balanced
• Suitable for cold water use
ATX40 2nd Stage
• Pneumatically balanced
• Diver-adjustable venturi control
• Suitable for cold water use
ATX40 Octopus
• Pneumatically balanced
• Diver-adjustable venturi control
• Suitable for cold water use
Part #
Description
AP0589C/DS4
ATX40 Stage 3 A-clamp
Retail
20,590.00 AP0589C/DS4/4-1
THB
Part #
Stage 4 - Pressure
Desscription
23,690.00
AP0589C-1/DS4
ATX40 Stage 3 DIN
20,590.00 AP0589C/DS4/4-2
Stage 4 - Pressure / Depth
26,790.00
Stage 4 - Triple Console
28,760.00
AP0589C/DS4/4-3
Retail
THB
XTX20 with XTX20 Octopus
UST4 1st Stage
• Balanced diaphragm design
• Swivel turret
• Designed for water above 50º F (10º C)
XTX20 2nd Stage
• Pneumatically balanced
• Diver-adjustable venturi control
• Left/right reversibility
• Designed for water above 50º F (10º C)
XTX20 Octopus
• Pneumatically balanced
• Diver-adjustable venturi control
• Left/right reversibility
• Designed for water above 50º F (10º C)
Part #
Description
AP0311F
XTX20 Stage 3 A-clamp
Retail
22,190.00 AP0311F/4-1
THB Part #
Stage 4 - Pressure
25,290.00
AP0311F-1
XTX20 Stage 3 DIN
22,190.00 AP0311F/4-2
Stage 4 - Pressure / Depth
28,390.00
Stage 4 - Triple Console
30,360.00
AP0311F/4-3
22 | REGULATORS
Desscription
Retail
THB
A peks re g ulat o rs
Flight with Flight Octopus
Flight 1st Stage
• Forged, lightweight body
• Balanced diaphragm design
• Compatible with hose-less computer transmitters
• Designed for water above 50º F (10º C)
Flight 2nd Stage
• Pneumatically balanced
• Diver-adjustable venturi control
• Lightweight, flexible, braided hose
• Designed for water above 50º F (10º C)
free
travel
regulator
bag
Flight Octopus
• Pneumatically balanced
• Diver-adjustable venturi control
• Designed for water above 50º F (10º C)
Part #
Description
AP0379
Flight Stage 3 A-clamp
Retail
28,290.00 AP0379/4-1
THB Part #
Stage 4 - Pressure
31,390.00
AP0379-1
Flight Stage 3 DIN
28,290.00 AP0379/4-2
Stage 4 - Pressure / Depth
34,490.00
Stage 4 - Triple Console
36,460.00
AP0379/4-3
Desscription
Retail
THB
XTX40 with XTX40 Octopus*
DST4 1st Stage
• Over-balanced diaphragm design
• Swivel turret
• Dry-sealed, over-balanced
• Suitable for cold water use
XTX40 2nd Stage
• Pneumatically balanced
• Diver-adjustable venturi control
• Left/right reversibility
• Suitable for cold water use
XTX40 Octopus
• Pneumatically balanced
• Diver-adjustable venturi control
• Suitable for cold water use
*or Egress Octopus
Egress Octopus
• Pneumatically balanced
• Suitable for cold water use
Part #
Description
AP0314F
XTX40 Stage 3 A-clamp
Retail
29,450.00 AP0314F/4-1
THB Part #
AP0314F-1
XTX40 Stage 3 DIN
29,450.00 AP0314F/4-2
AP0314F/4-3
Desscription
Retail
THB
Stage 4 - Pressure
32,550.00
Stage 4 - Pressure / Depth
35,650.00
Stage 4 - Triple Console
37,620.00
REGULATORS | 23
A peks re g ulat o rs
XTX50 with XTX40 Octopus*
DST4 1st Stage
• Over-balanced diaphragm design
• Swivel turret
• Dry-sealed, over-balanced
• Suitable for cold water use
XTX50 2nd Stage
• Pneumatically balanced
• Diver-adjustable venturi control
• Diver-adjustable breathing
effort control
• Left/right reversibility
• Suitable for cold water use
XTX40 Octopus
• Pneumatically balanced
• Diver-adjustable venturi control
• Suitable for cold water use
*or Egress Octopus
Egress Octopus
• Pneumatically balanced
• Suitable for cold water use
Part #
Description
AP0317F
XTX50 Stage 3 A-clamp
Retail
31,650.00 AP0317F/4-1
THB Part #
Stage 4 - Pressure
34,750.00
AP0317F-1
XTX50 Stage 3 DIN
31,650.00 AP0317F/4-2
Stage 4 - Pressure / Depth
37,850.00
Stage 4 - Triple Console
39,820.00
AP0317F/4-3
Desscription
Retail
THB
XTX100 with XTX40 Octopus*
FST 1st Stage
• Over-balanced diaphragm design
• Compact forged body
• Dry-sealed, over-balanced
• Suitable for cold water use
XTX100 2nd Stage
• Pneumatically balanced
• Diver-adjustable venturi control
• Diver-adjustable breathing
effort control
• Left/right reversibility
• Suitable for cold water use
*or Egress Octopus
Egress Octopus
• Pneumatically balanced
• Suitable for cold water use
free
regulator
bag
XTX40 Octopus
• Pneumatically balanced
• Diver-adjustable venturi control
• Suitable for cold water use
Part #
Description
AP0321F
XTX100 Stage 3 A-clamp
Retail
35,290.00 AP0321F/4-1
THB Part #
Stage 4 - Pressure
38,390.00
AP0321F-1
XTX100 Stage 3 DIN
35,290.00 AP0321F/4-2
Stage 4 - Pressure / Depth
41,490.00
Stage 4 - Triple Console
43,460.00
AP0321F/4-3
24 | REGULATORS
Desscription
Retail
THB
A peks re g ulat o rs
XTX200 with XTX40 Octopus
*or Egress Octopus
FSR 1st Stage
• Over-balanced diaphragm design
• Compact forged body
• Dry-sealed, over-balanced
• Suitable for cold water use
Egress Octopus
• Pneumatically balanced
• Suitable for cold water use
XTX200 2nd Stage
• Pneumatically balanced
• Diver-adjustable venturi control
• Diver-adjustable breathing
effort control
• Left/right reversibility
• Suitable for cold water use
free
regulator
bag
XTX40 Octopus
• Pneumatically balanced
• Diver-adjustable venturi control
• Suitable for cold water use
Part #
Description
AP0325F
XTX200 Stage 3 A-clamp
Retail
36,350.00 AP0325F/4-1
THB Part #
Desscription
Stage 4 - Pressure
39,450.00
AP0325F-1
XTX200 Stage 3 DIN
36,350.00 AP0325F/4-2
Stage 4 - Pressure / Depth
42,550.00
Stage 4 - Triple Console
44,520.00
AP0325F/4-3
Retail
THB
XTX200 Tungsten with XTX40 Octopus*
FSR Tungsten 1st Stage
• Over-balanced diaphragm design
• PVD (Physical Vapor Deposition) finish
• Dry-sealed, over-balanced
• Suitable for cold water use
*or Egress Octopus
Egress Octopus
• Pneumatically balanced
• Suitable for cold water use
XTX200 Tungsten 2nd Stage
• Pneumatically balanced
• Diver-adjustable venturi control
• Diver-adjustable breathing
effort control
• Left/right reversibility
• Suitable for cold water use
free
regulator
bag
XTX40 Octopus
• Pneumatically balanced
• Diver-adjustable venturi control
• Suitable for cold water use
Part #
Description
AP0327F
Tungsten Stage 3 A-clamp
Retail
39,990.00 AP0327F/4-1
THB Part #
Stage 4 - Pressure
43,090.00
AP0327F-1
Tungsten Stage 3 DIN
39,990.00 AP0327F/4-2
Stage 4 - Pressure / Depth
46,190.00
Stage 4 - Triple Console
48,160.00
AP0327F/4-3
Desscription
Retail
THB
REGULATORS | 25
A peks G A U G E s
Analog Instruments
Apeks instruments supply clear and accurate information on your dive status. Our instruments are tested beyond normal dive limits to ensure they provide this
precise information for all your dive experiences. Strong, easy to maintain housings provide years of trouble free service. You can be assured of the quality/finish
of all your Apeks equipment. Our gauges and gauge consoles are designed and finished at our UK factory ensuring that every aspect reflects our commitment
to quality. The gauges are stylish and fit perfectly with other products in the Apeks range, such as our world famous regulators.
Submersible Pressure Gauge (SPG)
•
•
•
•
•
•
The slim-line gauge case is made from nickel plated brass
Large loop area designed into the housing for ease of attachment
The dial range is from 0 to 360 bar
Uncluttered, with large black figures on a luminous background giving a long phosphorescent effect
Made with O2 compatible materials but be sure to O2 clean before use with high percentage oxygen
The dial window is made of highly shock resistant material (anti-splinter Polycarbonate) to protect your
quality gauge
• Over pressure relief fitted in the back
Apeks SPG, Brass,
300 Bar
Submersible Pressure Gauge (SPG) + Depth Gauge
•
•
•
•
See SPG details above
Dials have a long phosphorescent effect for better reading in poor visibility conditions
There are 2 attachment areas integrated into the design for position flexibility
This may be a compact design but the displays are vivid and clear - perfect for diving. For example the
depth gauge spreads the first half of the scale and in total shows a range down to 70 meter
• Depth gauge has resettable max depth indicator
• Made with high shock-resistant windows, which is a must for divers
Console, 2 Gauge,
300 Bar, 70 Meter
Submersible Pressure Gauge (SPG) + Depth Gauge + Compass
• See specifics on each individual instrument above
• All instruments give accurate, clear readings and are made from the best quality build materials. As such
they offer perfect functionality and excellent robustness
Console, 3 Gauge, 300 Bar,
70 Meter, Compass
Colour range
Optional HP Flex Hose
Backside view
Part #
Description
AP0633
Pressure Gauge & Standard HP Hose : Pewter, Green, Pink
AP0635
Pressure & Depth Gauge with Standard HP Hose: Pewter, Green, Pink
AP0636
Pressure / Depth Gauge & Compass Console with Standard HP Hose: Pewter, Green, Pink
AP0633M
Pressure Gauge & Hose with HP Flex Hose: Pewter, Green, Pink
AP0635M
Pressure & Depth Gauge with HP Flex Hose: Pewter, Green, Pink
AP0636M
Pressure / Depth Gauge & Compass Console with HP Flex Hose: Pewter, Green, Pink
26 | GAUGES
Retail
THB
3,990.00
7,490.00
11,250.00
4,390.00
7,890.00
11,650.00
A peks G A U G E s
Nitrox Pressure Gauge
• O2 clean
• Can be used for up to 100 % Oxygen
• Bright green colour indicates its use for nitrox exclusively
Part #
Description
NP0633
Nitrox Pressure Gauge & Hose
Retail
THB
4,790.00
Pony Indicator
• A miniature yet accurate and robust 350 bar pressure gauge
• Fits directly into the HP port of a pony regulator
• No need for a trailing hose
Part #
Description
AP6101
23mm Pressure Indicator
Retail
THB
3,390.00
Professional Dive Watches
•
•
•
•
Reliable Seiko VX42 Quartz movement
Large uni-directional bezel and day/date display
Tough stainless steel case with screw-in crown
Tested to 200 metres
Part #
Description
AP0406
Professional Dive Watch Gents
Retail
7,250.00
THB
AP0406-2
Professional Dive Watch Ladies
7,250.00
GAUGES | 27
A peks B C S
Black Ice
The Apeks Black Ice is a rugged, weight-integrated, back inflation BC designed with
the advanced diver in mind. Despite its heavy duty construction, it provides amazing
comfort, fit and stability thanks to its Wrapture Harness System (pat. pend.). Due to the
modular nature of this BC, a custom fit can be achieved through any of the three sizes.
The Black Ice is offered in one color only, you guessed it, black.
Pictured here with
optional knife
• Wrapture™ harness system – Using patented swivel shoulder buckles and a proprietary, ultra-thin
back plate, the Wrapture™ provides unsurpassed comfort and stability. Wrapture™ prevents the
BC from “riding-up” on the surface. Out of the water, the Wrapture keeps the cylinder close to
your center of gravity and transfers the weight to your hips. The result is the ability to stand up
straight with a cylinder that is perfectly vertical.
• Because of the multiple size settings at the top of the shoulders as well as either side of the
waistband, a custom fit can be achieved through any one of 3 sizes.
• SureLock II Mechanical Weight Release System (patented) – provides a safe, single-pull release.
Inserting weight is as simple as insert and “click”. With SureLock, your weights are secure in the
BC. Once engaged, the only way to release the weight is to pull on the handle.
• Dual channel weight pockets in front along with non-ditchable weight pockets in back mean
that all sizes can hold up to 42 lbs. (19kg)
• The Black Ice can be rigged for twin cylinders using the optional twin cylinder kit (p/n 427106).
• There are 4 dump valves in all, one in each corner. 3 are proprietary flat valves (patented) that
are very streamlined and effective. The dump valve on the upper left is the rapid exhaust valve
found at the top of the Powerline inflator.
• The Powerline inflator assembly boasts one of the fastest inflation rates in the industry. This
environmentally sealed unit has integrated clips to keep the l.p. inflator hose tucked in tight.
• The air cell has several pass-throughs that allow easy air transfer from left to right
• A triple bladder retraction system is used to pull in the sides of the bladder during deflation. This
keeps the unit streamlined and reduces drag.
• The left pocket is a fold down design with deep capacity, perfect for an extra mask.
• The right pocket is a large utility pocket secured with a robust zipper
• Knife attachment points are found on the left pocket flap which will accommodate many of the
Squeeze Lock knives. This location provides easy access to the knife.
• Features 5 large, angled, stainless steel D-rings for all of your accessories.
• Rolled neck collar for comfort
Black Ice Specifications
Type of BC:
Fabrics:
Ditchable weights:
Non-ditchable weights:
Lift Capacity (lbs/N):
Color:
Sizes:
Weight-integrated Back Inflation
Air cell is rugged 840 D nylon, Armor X, V-Diamond rubber,
ballistic nylon
All sizes hold 32lb/14.5kg
All sizes hold up to 10 lb/4.5kg
SM/MD - 52/230, ML/LG - 52/230, XL/XXL - 52/230
Black
3 – SM/MD, ML/LG, XL/XXL
Valve Retention Twin Cylinder
Strap
Compatible
Innovative
Swivel Buckle
SOLAS Reflector Flat Valve
Hold Down
Technology
Wrapture™ Harness System
Knife Attachment SureLock™ II
Points
Weight System
GripLock™ Tank
Band
Part #
Description
397092
Apeks Black Ice
SM/MD
32,490.00
397094
Apeks Black Ice
ML/LG
32,490.00
397096
Apeks Black Ice
XL/XXL
32,490.00
28 | BCS
Retail
THB
A peks B C S
Apeks WTX Series
Apeks, the company that produces the premiere line of technical regulators, offers you a premiere line of
technical BCs. Presenting the WTX Series – a selection of harnesses, buoyancy cells and accessories that
will certainly appeal to today’s technical divers. These fine products offer unparalleled versatility through
their modularity. The components can be assembled into a highly technical rig for those trained to push
the limits or scaled down to make a travel friendly rig that any diver would want to use.
Each product has been carefully designed by the Apeks’ engineering team in conjunction with some of the
most accomplished technical divers of our time. Each component has undergone extensive field-testing
to make sure the design is right the first time. All materials and components were selected for strength
and durability. The result is a product selection that technical divers can have confidence in.
WTX Harness
This is our most versatile harness. Solid construction coupled with
durable materials make this harness a cornerstone for many applications.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Can mount directly to a single cylinder using dual nylon cylinder bands or a single tank adapter
Can accept an Apeks back plate for heavy loads such as twin steel cylinders
Multiple grommet settings on the waistband allow the attachment of the SureLock™ weight system
Open shoulder design allows diver to add or remove hardware for total customization
Made from rugged 1050D Ballistic Nylon
Removable crotch strap made of 2” (5cm) soft web
6-two inch stainless steel D-rings (2, angled, on shoulders, 2 on the hips and 2 on the crotch strap)
6-one inch stainless steel D-rings along the sides accommodate light canisters, argon bottles or other accessories
2-one inch stainless steel D-rings along the lower back are for marker buoys, reels or other accessories
Removable back pad
Heavy duty waist buckle made of stainless steel
Stainless steel triloaders distribute the load between the back, waist and shoulders for a great fit
SOLAS reflector airway hold-downs can be removed or repositioned
Chest strap comes standard
Includes 2ea. tank bands
Part #
Description
AP0465
Apeks WTX Harness
S
Retail
16,990.00
THB
AP0468
Apeks WTX Harness
M
16,990.00
AP0469
Apeks WTX Harness
L
16,990.00
AP0470
Apeks WTX Harness
XL
16,990.00
Deluxe One-piece Webbed Harness
This simple, yet strong, harness can take the load of a fully rigged technical diver. It can
be easily customized with the hardware of your choice.
•
•
•
•
•
•
•
•
12’ of solid 2” (5cm) webbing with center grommet
2” (5cm) wide crotch strap
6 stainless 2” (5cm) D-rings
Includes neoprene shoulder protectors
2 elastic retaining loops on shoulders and one on crotch strap
Heavy duty stainless waist buckle
6 stainless serrated retainers
Tank bands not included
Part #
Description
AP0474
Deluxe Webbed Harness
*Back Plate NOT included
with Deluxe Webbed Harness
Retail
THB
4,540.00
BCS | 29
A peks B C S
Ultralight Travel Plate
•
•
°
°
The Ultralight Travel Plate is ideal for those that like to travel with plate and wings
Paired with the WTX-D18 donut wing, it makes a very lightweight, streamlined kit
Uses Deluxe One-Piece Webbed Harness (p/n 388040)
Can accept SureLock Weight System (p/n 388020) directly or by using SureLock
Attachment plates (p/n 388045)
Front
Part #
Description
AL388210
WTX-D Ultralight Plate
Back
Retail
THB
3,090.00
WTX Backplate - Steel or Aluminum
The backbone of any system - this cleverly designed back plate can be used with the webbed harness or inserted into the WTX Harness.
•
•
•
•
•
•
•
•
Offered in either 304 stainless steel or 6061 anodized aluminum alloy
The stainless steel weighs approx 5 lbs (2.2 kg)
The aluminum weighs approx 1 lb 11oz (753g)
4 each upper and lower slots accommodate nylon cylinder bands so a single cylinder can be strapped
directly to the plate. Having a series of 4 slots provides lateral stability of the cylinder that traditional 2
slot plates cannot
3 holes at the top of the plate offer a range of height adjustments for the buoyancy cells and the cylinders.
In addition, a corresponding lower center slot allows for lower band bolts that are misaligned
2” wide crotch strap slot
Upper and lower perimeter holes along either side and holes along the bottom allow for the mounting
of accessories
Both offer an electro-plate finish and a laser-etched Apeks logo to enhance the look of the plate
Part #
Description
Retail
THB
AP0475
Apeks Backplate, Stainless
8,980.00
AP0475A
Apeks Backplate, Aluminum
6,190.00
WTX Single Tank Adapter
The single tank adapter is a great way to quickly attach a single
cylinder to a back plate or the WTX harness.
•
•
•
•
•
•
Made of 316 stainless steel
Weighs 1 lb. 1 oz. (490g) without hardware
Comes with 2 sets of bolts and one pair of washers and wing nuts
1” bolts for directly mounting to back plate
1.5” bolts for mounting to back plate inside WTX harness
Nylon tank bands are not included and may be purchased separately Part #
Description
AP0478
Single Tank Adaptor
30 | BCS
STA Mounted on Cylinder
Retail
THB
2,780.00
A peks B C S
Single Cylinder Wings (Donuts)
Single cylinder wings, often referred to as donuts, are
oval shaped air cells or bladders that are not permanently
attached to a harness. While single cylinder wings have
their origins in the realm of technical diving, they are
becoming very popular in the recreational community.
Not only are these single cylinder wings streamlined, but
due to their shape being a continuous loop, they are very
stable underwater. There is no dramatic shift of air from
left to right.
Apeks single cylinder wings are a smart design that allows a cylinder to nest deep inside them. These wings
mate up nicely to the rest of the Apeks WTX collection of
high quality harnesses, plates and accessories. They can
be configured in multiple ways to match the type of
diving that you do.
As with the rest of the WTX collection, these single
cylinder wings are built from the finest quality materials.
They are designed by Apeks and built in our own factory.
WTX-D18 Front
WTX-D18 Side
WTX-D18 Back
WTX-D30 Front
WTX-D30 Side
WTX-D30 Back
WTX-D40 Front
WTX-D40 Side
WTX-D40 Back
Features:
• Inflator:
° K style with brass buttons
° Low profile 16” oval-shaped hose
° Safety cable to prevent hyper-extension
° Positioned off-center so as not to interfere with regulator 1st
stage
• Dump Valve
° Low profile flat valve
° Positioned in front, lower-left side
• Tank Stabilizer Bars
• Drains
° 2 large drain grommets
° Center mesh drain panel
• The 30lb and 40lb wings are able to accept an optional Retractor
Kit, P/N: 388300
• Materials:
° Exterior: 1000D Armorshield Cordura
° Inner air cell: 22mil (.022) thick black urethane
Zipper: heavy duty YKK #10 plastic zip and slide
Part #
Description
Retail
THB
388118
WTX-D18
Single Cylinder Wing
15,490.00
388130
WTX-D30
Single Cylinder Wing
16,420.00
388140
WTX-D40
Single Cylinder Wing
16,880.00
BCS | 31
A peks B C S
WTX3 Buoyancy Cell
This single cylinder buoyancy cell can mate to the WTX Harness or directly to the back plate.
• Gussets along each side allow for a full 34 lbs of lift without compromising the overall size of the
WTX3
• 4 slots allow it to be mounted to a WTX harness or back plate using upper and lower nylon cylinder
bands
• 2 pairs of grommets allow the WTX3 to be bolted on if a single cylinder mounting kit is used
• A 2” (5cm) wide restriction band at the bottom of the WTX3 allows the cylinder to nestle into the
inflated buoyancy cell so it doesn’t get pushed away from your body
• A 2” (5cm) D-ring on the restrictor band is a convenient place to add accessories like a surface marker
buoy
• The airway comes off the top back center of the cell. A safety cable inside the elliptical hose prevents
hyperextension of the corrugated hose
• Features the Apeks technical inflator with brass buttons
• Includes front, lower left pull dump
• Constructed from durable 840-denier nylon
Part #
Description
AP0471
WTX3 34lb Buoyancy Cell
Retail
THB
14,340.00
WTX4 Buoyancy Cell
The WTX4 is a smaller version of the WTX6 & WTX8 but it can accept single cylinders too!
• The WTX4 provides 45lbs. of lift
• The WTX4 can mate directly to the WTX harness or the stainless steel back plate using twin tank
bands or using center bolts
• Highly efficient drains allow water to empty quickly after a dive
• Outer bag constructed out of 1000D Armorshield™ Cordura® to resist abraision and fading
• Inner bag constructed from mil-spec welded fabric. This is the same fabric used in survival vests
worn by US fighter pilots
• The airway comes off of the back top center of the cell. A safety cable inside the elliptical hose
prevents hyperextension of the corrugated hose
• Features the Apeks technical inflator with brass buttons
• Pull dump on inside lower left
• Optional pull dump may be added to the inside lower right
• Accepts WTX Internal Retractor Kit part number: 388300
Part #
Description
388345
WTX4 45lb Buoyancy Cell
32 | BCS
Retail
THB
16,670.00
A peks B C S
WTX6 & WTX8 Buoyancy Cells
• These twin cylinder buoyancy cells provide 60 lbs and 85 lbs of lift respectively
• Outer bag constructed out of 1000D Armorshield™ Cordura to resist abrasion and fading
• Inner bag constructed from mil-spec welded fabric. This is the same fabric used in survival vests
worn by US fighter pilots
• Inner bladder protected from zipper with V-diamond rubber
• Pull dump on inside lower left
• Optional pull dump may be added to inside lower right
• Highly efficient drains empty water quickly after the dive
• 3 upper grommets allow various height settings coupled with a lower slot that compensates for
misaligned band bolts
• The airway comes off the top back center of the cell. A safety cable inside the elliptical hose prevents
hyperextension of the corrugated hose
• Features the Apeks technical inflator with brass buttons
Part #
Description
AP0472
WTX6 60lb Buoyancy Cell
Retail
15,120.00
THB
AP0473
WTX8 85lb Buoyancy Cell
15,120.00
WTX6R Buoyancy Cell
The first of it’s kind. This clever, redundant buoyancy cell has both airways coming off the
back top of the cell. This is the ideal location for a diver in the swimming position.
• This redundant system contains two inner cells in one outer bag. Either cell is capable of generating
60 lbs of lift when it is full. Dive with peace of mind knowing that you’re carrying a redundant system
• The WTX6R can mate directly to the WTX harness or the stainless steel back plate using twin tank
bands or using center bolts
• Highly efficient drains allow water to empty quickly after a dive
• Outer bag constructed out of Armorshield™ Cordura® to resist abraision and fading
• Inner bags constructed from mil-spec welded fabric
• A safety cable inside the elliptical hoses prevents hyperextension of the corrugated hoses
• Features the Apeks technical inflator with brass buttons
• The air cell closest to the diver has a pull dump on inside lower left with a capped-off port on the
inside lower right for an optional right dump
• The air cell furthest from the diver has a pull dump on outside lower right with a capped-off port
on the outside lower left for an optional left dump
• Accepts WTX Internal Retractor Kit part number: 388300
Part #
Description
388460
WTX6R 60lb Redundant Buoyancy Cell
Retail
THB
25,970.00
BCS | 33
A peks B C S
WTX Internal Retractor Kit
• Can be installed on WTX4, WTX6, 6R and 8 (above)
• Comes with full instructions
• Consists of two retractor bands in a bag
Part #
Description
388300
WTX Retractor Kit
Retail
THB
1,230.00
WTX Tek Pockets
A full range of Tek pockets have been designed to complement the WTX
range. They can be attached to your WTX system or any other BC/Wing and/
or drysuit.
• The system is modular so you can attach one pocket to the other if space is at a
premium. A separate stainless steel hardware kit is available for this.
• The large pockets are available in heavy duty hook and loop and zipper versions,
allowing for easy open / close even when wearing thick gloves.
• The pockets contain internal bungee attachment points to clip your gear to.
• Models:
o THIGH POCKET - with large volume capacity and extra security of leg band
to carry reels, spools, torches or knives.
o LARGE CARGO POCKET- with Zip Closure and capability to fix directly to
Waistband grommets, or straight over the side Lobe even after Diver is
kitted up.
o SMALL POCKET - fits to the front of the Large Cargo if desired. For carrying,
slate, floats, line markers or extra weights.
o MESH POCKET – For carrying SMBs, or a redundant mask
Part #
Description
388000
WTX BC POCKET MESH
1,770.00
388005
WTX BC POCKET SMALL CARGO
2,070.00
388010
WTX BC POCKET LARGE CARGO
2,330.00
388015
WTX BC POCKET TIGH
2,660.00
388018
KIT BOLT/NUT 5 PACK FOR WTX BC POCKETS
34 | BCS
Retail
THB
690.00
A peks B C S
SureLock™ Weight System
This popular accessory is ideal when it becomes necessary to add additional weight to your rig.
•
•
•
•
•
Bolts directly to the WTX Harness
Able to mount to the back plate with use of SureLock™ attachments
Includes necessary attachment hardware plus spares
2” stainless adjustable D-rings on the outside of each pocket
Features the SureLock™ (patented) mechanical weight release buckles which prevent weights from
releasing until you want them to
• Each pocket holds up to 10 lbs (4.5kg) of lead
• Includes attachment grommets to mount your choice of Deep See knives
Part #
Description
AP0476
Apeks Surelock Weight System, 10Lb
Retail
THB
7,370.00
SureLock™ Attachments
This unique accessory allows you to mount the SureLock™ Weight System(Patented) directly to
the back plate.
• Includes necessary attachment hardware plus spares
• May be used without the SureLock™ Weight System to spread the weight of the cylinders over the hips
• 3 different grommet settings allow for proper positioning of the SureLock™ weight pockets
Part #
Description
AP0477
Apeks Surelock Weight System Attachments
Retail
THB
3,490.00
Airway Complete
•
•
•
•
•
•
High performance inflator with excellent flow rates
Simple design makes for easy serviceability and dependability
Rugged housing with solid brass buttons
Elliptical hose for lower profile and less drag
An internal safety cable prevents hose from being hyperextended
Simple 90° elbow at the top
Part #
Description
42772
Apeks Airway Complete
Retail
THB
4,990.00
Stainless Steel Book Screws
Book screws can be used to attach a wing to a back plate or to anchor an accessory
to a back plate. Each kit comes with two complete sets of mating book screws with
friction o-rings. Two different lengths are available, 3/8” or 3/4” depending upon
your application.
Part #
Description
388112
Kit Book Screw, 3/8, 2 Pack
Retail
1,770.00
THB
388113
Kit Book Screw, 3/4, 2 Pack
1,770.00
BCS | 35
AQUA MASTER (Thailand) Co., Ltd.
43 / 30-32 Moo 5, T. Rawai,
A. Muang Phuket 83130
Telephone: (+66) 076 281 227, 076 383 245
Fax:
(+66) 076 281 073
e-mail: [email protected]
Web:www.aquamaster.net