Datasheet FLASHLINK FlashCase II model 1 Rugged enclosure with 2x Neutrik opticalCON QUAD The Nevion FlashCase is a ruggedized housing for flashlink cards in live event production The FlashCase is a building block in Nevion’s awardwinning Flashlink Live Media Networking solution. It is a plug-and-play stagebox for transport of video, audio, data, sync and intercom from/to video and audio ingest positions. Applications • Live productions • Production truck fiber optic extension/connection • Media ingest • Camera interfacing • Studio/event relay box • Video/audio transport The FlashCase’s modular design is customizable to fit each application. It supports all Flashlink modules and covers a complete range of 3G-SDI video and audio processing as well as dark fiber video, data and Ethernet transport. The FlashCase also features an in-band management solution that enables control and monitoring of equipment in remote locations. • Video trunking • Data communication • Dark fiber transport Key features • Supports up to 5 Flashlink modules The FlashCase II model 1 features 2 Neutrik OpticalCON QUAD connectors which provide access to 4 or 8 fibers of video, audio and data transport. The models connector scheme has been carefully designed to fit a two camera ingest. The model can also be upgraded with an 8 channel CWDM filter to extend the number of signals transported. • Rugged connectors • Rugged water resistant housing for reliable performance in harsh environment • Compact and lightweight – fully populated weight is under 5 kilograms / 11 pounds • Optional CWDM support • Internal fans and power supply monitoring R1404 nevion.com • 2x Neutrik OpticalCon Quad Specifications • 6x female XLR connectors General specifications Dimensions (L x W x H) 42cm x 25.5cm x 11.5cm Number of fans 2 • 8x BNC connectors Flashlink module slots 5 dual card slots CWDM filter slots 1 • 4x RJ45 connectors — 1x ethernet — 2x GPI and data — 1x Intercom Power and monitoring slots 1 Weight <5kg AC power External power supply, SL-PWR-90-FlashCase • 2x XLR 4-pin power connector (Sony compatible) DC power input 2x 4pin XLR connector +12V to +16V Max load +5V, max 25W +15V, max 7.5W -15V, max 7.5W • 6x male XLR connectors AC power Connections External connector Cable and termination inside FlashCase Neutrik OpticalCon Quad 4x fiber pigtails with LC/UPC connectors XLR female 3 wires twisted with 3-pin Molex KK connector XLR male 3 wires twisted with 3-pin Molex KK connector BNC jack RG59 terminated with BNC plug RJ45 ethernet RJ45 and CAT-6 cable RJ45 GPI and data 4x 3 wires twisted with 3-pin Molex KK connector RJ45 intercom 4x 3 wires twisted with 3-pin Molex KK connector Order information 20248 FlashCase II MOD 1 Portable rugged frame for 5 Flashlink modules with two Neutrik OpticalCON QUAD, each connector with 4 x fibers. Also 8x BNC, 6x XLR male, 6x XLR female and 4x RJ45. Including 1x SL-PWR-90-FlashCase. 21932 SL-PWR-90-FlashCase 90W power supply for FlashCase II for redundant power. Contact information The Americas [email protected] +1 (805) 247-8560 Asia Pacific [email protected] +65 6872 9361 Europe and Africa [email protected] +47 33 48 99 99 Middle East [email protected] +971 (0)4 3901018 UK [email protected] +44 118 9735831 nevion.com Nevion reserves the right to make changes without notice to equipment specification or design. The information provided in this document is for guidance purposes only and shall not form part of any contract. © 2013 Nevion. All rights reserved.
© Copyright 2024 ExpyDoc