This document discribes WV-SP302, SF305, SP306, SF332/335/336, SF332, SF342/346 firmware version up Information. ： Version 1.44 (Application Firmware) 1. Release version： ： 2. Release Note Reference Number： ： SP30x_006 ： 2012/4/13 Panasonic System Networks Co.,Ltd WV-SP302,SP305,SP306,SF332,SF335,SF336,SF342,SF346 Firmware Release Note VER (ActiveX VER) Release Date Priority Rank Level Ａ Ｂ Ｃ Ｕ x 1.04 （4.01.14） Sep.'10 C 1.06 (4.00.14) Nov., '10 U 1.30 (4.01.00) May.'11 In the cases length of network were not 8, 16, nor 24 Fixed to communicate over subnetwork. (ex.255.255.252.0) and ProxyARP function on router were Improved image quality for supporting FACE RECOGNITION function on NV200. x - - Support "Movie(MJPEG)" display function on mobile terminals. * Applicable model : iPad, iPhone, iPod touch (iOS 4.2.1 or newer) Support "VIQS (Variable Image Quality on Specified area) display function. Support stream switch function (H.264<=>MPEG4) on LIVE monitoring. Improved "H.264 picture quality". Name changed : from Display plug-in software(Active-X) to "Network Camera View4S". x Unable to access from other clients in approx. 6 to 10 min. （Occurrence frequency : Low) SD card recognition error may not be notified. （Occurrence frequency : High) Camera may become "Safe mode". （Occurrence frequency : Low) H.264(MPEG4) stream stops. (Occurrence frequency : High) Unplug the ethernet cable from the PC while receiving data from camera on HTTP protocol. SD memory card recognition error happens during the process of saving movie data into SD card. ( This happens only when SD memory card recognition error , but not when SD card full or strage space small capacity.) Using under broadcast storm(s) on network. Fixed to be able to communicate with other cilents. Fixed to properly. Strengthen measures aimed at preventinging in "Safe mode". When SS/RR command is received during theRTSP authentication process, and Fixed. under displaying H.264 image through RTSP. （very rare) During the reboot process after upgrading firmware or May not boot up from reboot process. initializing Fixed. (Occurrence frequency : Low) ( [Reset to the default] / [Load the default HTML files.] / [Reset to the default and load the default HTML files.]) * Not occur by power off and on. * Can recover by power off and on. * Apprlicable from June.2011 or later product Camera may reboot, unexpectedly. In case of using JPEG. (Occurrence with a particular cycleFixed to avoid rebooting. (Occurrence frequency : very rare) : ex : After power on 159.5th day, etc. ) The recording cycle of SD backup may become longer than 1 In case of using SD backup function (set 1ips), it will sec in case of SD backup set 1ips on Network Disk Recorder. happen after 10 sec when Network is disconnected & SD Fixed to bacup properly. backup process starts. C x x C x x x x C Update description on HELP screen. - x 1.44 (4.08.00) Jan.,'12 Correspondence Occurrence condition - x 1.35 (4.01.00) Oct,'11 Contents x x 1.34 (4.01.00) Sep,'11 Issue (Phenomenon) Unable to communicate over subnetwork. （Occurrence frequency : High) ｘ x x x x C Priority Rank Level A： ：Recommend to apply (Major or serious update) B： ：When issue happened C： ：Maintenance timing U :Function /Performance improvement (Not Nessesury to update) update) x x - - - - - - x x x 1/2 Supported language selection in html screen (Japanese, English, French, Italian, German, Spanish, Russian, Chinese) Expanded maximum number of characters for camera title on screen from 16-charachter to 20. Supported auto summer time(daylight saving time) switching between Standard time and Summer (Daylight) time according to schedule. Supported schedule mode for recording onto SD memory card (H.264). Supported selectable 2 each picture qualities (Default 1:5 Standard and 2:8) per resolutions. Supported Best Effort streaming for H.264 and MPEG-4. Changed factory default of Transmission priority from constant bit rate to frame bit rate, also refresh interval from 3s to 1s. Added a setting to display more smoothly when plug-in software displays the picture. Support audio compression method G.711. SP30x/SF33x/SF34x Sereis Version History 1.44 This document discribes WV-SP302, SF305, SP306, SF332/335/336, SF332, SF342/346 firmware version up Information. 1. Release version： Version 1.44 (Application Firmware) 2. Release Note Reference Number： SP30x_006 2012/4/13 Panasonic System Networks Co.,Ltd WV-SP302,SP305,SP306,SF332,SF335,SF336,SF342,SF346 Firmware Release Note VER (ActiveX VER) Release Date Priority Rank Level Ａ Ｂ Ｃ Ｕ Priority Rank Level A： ：Recommend to apply (Major or serious update) B： ：When issue happened C： ：Maintenance timing U :Function /Performance improvement (Not Nessesury to update) update) Issue (Phenomenon) Contents x x - - - - - - x x x 1.44 (4.08.00) Jan.,'12 x C x x - - - - - - x x x x Correction "B" (was "C") x x x Brightness in video screen may be varied. （Occurrence frequency : Low） Video streaming may be stopped. （Occurrence frequency : Low） Correspondence Occurrence condition In the case "Light conrol mode" is in "ELC". 1. Added alarm area information (VMD) in Panasonic alarm protocol notification. Please switch off if you use WV-ASM100, or WV-ASM100 cannot detect VMD alarm properly. 2. Supported host name as destination of Panasonic alarm protocol notification. Added simplified format for format of the XLM notification. Added the Digest access authentication as user authentication. Note: please select Basic Authentication (Basic access authentication) if you use CGI on BB series cameras. Added setting to obtain NTP Server address from DHCP server. EasyIPsetup software supports AutoIP on this camera. In the case DHCP server were not found, IP address will be assigned automatically. Added setting parameters in configuring netowrk settings; - DHCPv6 - DNS Primary Server Address for IPv6 - DNS Secondary Server Address for IPv6 - RTP Packet Maximum Transmission Unit (MTU) - Maximum Segment Size (MSS) in HTTP Support UPnP (Auto-port forwarding, Short-cut to camera) Removed the help from the html page (please refer to instruction manual instead). Supported monitoring video clip (MJPEG) accessing from mobile terminals (*). And support selecting resolution and AUX controls. *: iPad, iPhone, iPod touch (iOS4.2.1 and newer), Android. Changed name of existing function; from One-shot to Snap-shot. Improved picture quality at specific frame rate in H.264. Fixed to display brightness within the screen properly. While sending video stream in RTSP. (The issue is not seen Fixed to send properly. if Panasonic reorders were used.) 2/2 SP30x/SF33x/SF34x Sereis Version History 1.44
© Copyright 2024 ExpyDoc
