SULFATREAT XLP-EZ SULFATREAT XLP-EZ† or Extended Life Product is a high-capacity, iron oxide absorbent, especially formulated for improved change-outs, providing predictable and reliable results for the removal of Hydrogen Sulfide from water saturated gas. SULFATREAT XLP-EZ is a non-hazardous granular material engineered for the removal of hydrogen sulfide (H2S) from natural gas streams. During the absorption process, water saturated gas or vapor flows down through the SULFATREAT XLP-EZ in the vessel’s bed. Hydrogen sulfide chemically reacts to form a stable and safe byproduct. Product consumption is dependent only on the amount of hydrogen sulfide that actually passes through the bed. This economically matches the need for H2S removal with variations in system flow conditions and outlet specifications, regardless of the total volume or other common components of the gas. Upstream of the SULFATREAT XLP-EZ vessel(s), the installation requires water injection to assure 100% water saturated gas and an inlet separator to remove free liquids from the gas. The extended life and improved removal characteristics not only saves waste and disposal costs, but freight and change-out expenses as well. Typical Physical Properties Appearance.........................................................................................................................................................................................................Black, odorless Form...................................................................................................................................................................................................................................Granular Composition................................................................................................................................................................................................................ Proprietary Packing density, kg/l (lb/ft3)....................................................................................................................................................................1.44 - 1.54 (89.9 - 96.1) Features ■■ Reliable, predictable performance ■■ Operating flexibility ■■ Cost-effective hydrogen sulfide removal ■■ Predictable, consistent pressure drop ■■ Improved change-out characteristics ■■ Straightforward disposal of spent media Absorbent Bed Separator Sour SourGas Gas Inlet Inlet Free Liquids Water Injection Sweet Gas Outlet Drain Packaging SULFATREAT XLP-EZ is available in 2,000-lb (907-kg) bulk bags. Full truckload orders of 40,000 lb (18,144 kg) and 20-ft (6.0-m) overseas containers are shipped from the main warehouse near St. Louis, Missouri. Less-than-truckload orders may be shipped from conveniently located warehouses throughout the United States and Canada. Handling and Disposal SULFATREAT XLP-EZ is an iron oxide absorbent. Such materials can be handled safely provided that proper safety procedures, such as permit-to-work systems, and risk assessments, such as a Job Safety Analysis, chemical-handling assessments, lifting studies and applicable disposal regulations, are followed. It is recommended that an experienced contractor be engaged for product loading and discharge. SULFATREAT XLP-EZ is non-pyrophoric and safe in both its initial and ready for disposal forms. The most common route for disposal is to a non-hazardous Class II landfill. This is a very feasible and regularly practiced route for disposal. SULFATREAT XLP-EZ is non-hazardous in accordance with the guidelines established by the US Environmental Protection Authority (EPA). However, should any foreign contaminating materials be contained in the gas, or otherwise be introduced to the reactor, the resultant mixture may require special disposal considerations. Spent media should be analyzed by the operator and any regulatory or local approvals needed obtained. Please refer to the relevant Material Safety Data Sheet for further information. Questions? We’ll be glad to answer them. If you’d like to know more about SULFATREAT XLP-EZ, and how it’s performing for our other customers, please call the M-I SWACO office nearest you. U.S.A. 17998 Chesterfield Airport Road Suite 215, Chesterfield, MO 63005 Toll-Free: 1 800 726 7687 Europe Aberdeen, UK Tel: +44 1224 285500 Latin America Rio de Janeiro, Brazil Tel: + 55 21 3541 7170 This information is supplied solely for informational purposes and M-I SWACO makes no guarantees or warranties, either expressed or implied, with respect to the accuracy and use of this data. All product warranties and guarantees shall be governed by the Standard Terms of Sale. Nothing in this document is legal advice or is a substitute for competent legal advice. ©2014 M-I L.L.C. All rights reserved. †Mark of M-I L.L.C. TPB.1966.1403.R2 (E) Asia Pacific Kuala Lumpur, Malaysia Tel: + 603 2161 7655 www.miswaco.slb.com Email: [email protected]