M10362 – FIGHTER 1330 with additional heat, hot water accumulators and exhaust air unit.
Application
Apartment buildings, industrial premises or
similar with a large hot water demands.
Oil boiler alt. electrical boiler
with shunt valve
Small electrical boiler with several
steps
District heating
Function
FIGHTER 1330 prioritises charging of hot
water at full power (heat pump module A
+ B) via a 3-way valve (19). When the hot
water accumulators (90) are fully charged,
the shuttle valve (19) switches to the
heating circuit.
When there is a heat demand, one
compressor starts first. For greater
demands, the next compressor starts.
FIGHTER 1330 connects the additional heat
when the power demand exceeds the heat
pump’s capacity. Flow line sensor (89) and
return sensor (94) must be placed on the
main line to and from the radiators.
A by-pass contactor (31) is recommended.
Additional heating
HWC
Note! This is an outline diagram.
Actual installations must be planned
according to applicable standards.
See the appropriate “Installation and
Maintenance Instructions” for more
information.
TIF GB 0925-3
PAGE 1 (2)
NIBE AB Sweden- Box 14, Järnvägsgatan 40, SE-285 21 Markaryd
Tel: +46-(0)433 - 73 000 Fax: +46-(0)433 - 73 190 E-mail: [email protected] www.nibe.com
M10362 – FIGHTER 1330 with additional heat, hot water accumulators and exhaust air unit.
List of Components
Pos
VP1
4
5
6
15
19
20
31
34
35
36
37
38
39
43
44
49
52
63
81
85
88
89
90
94
96
98
99
103
104
106
108
109
114
116
121
Name
Heat pump
Rock/Ground collector
Pressure gauge
Venting
Outside temperature sensor (UG)
Reversing valve (RV)
Boiler sensor (PG)
Auxiliary relay/Contactor with bypass
Control box
Circulation pump
HWC-pump (VVC)
Exchanger, hot water
Charge pump, hot water (VVL)
Control valve, hot water
Shunt valve (SV-P)
Shut-off valve
Non-return valve
Safety valve
Particle filter
Control valve
Expansion vessel
Hot water sensor (HWS)
Flow line sensor (FG)
Hot water accumulator
Return sensor (RG)
Water heater
Oil boiler
Electric boiler
Heating medium pump (VBP3)
Expansion card 11
Mixing vessel
Hot water charge sensor, regulator (VVLG)
Circulation pump, boiler
Exhaust air unit
Remote heat exchanger
HWC valve
TIF GB 0925-3
PAGE 2 (2)
Specification
FIGHTER 1330
Manufacturer
NIBE
HR 10
A60DA, 230/24V
NIBE
NIBE
NIBE
NIBE
Siemens HVAC Products
PLEX 322 -60
UPS 32-80B
VVG41.25-10, SQX62
NIBE
Grundfos
Siemens HVAC Products
VST 20
Part No.
089388
Hot water circulation
Max 40 kW charge power
Included in FIGHTER 1330
With req. safety equipment
Included in FIGHTER 1330
Included in FIGHTER 1330
NIBE
NIBE
NIBE
NIBE
NIBE
EXP 11 (for HWC)
NIBE
RLE 162
Siemens
Included in FIGHTER 1330
VST 20 max 40 kW charge power
Included in FIGHTER 1330
089423
NIBE
AKIL 500
Remarks
Master
Included in FIGHTER 1330
067042
NIBE AB Sweden- Box 14, Järnvägsgatan 40, SE-285 21 Markaryd
Tel: +46-(0)433 - 73 000 Fax: +46-(0)433 - 73 190 E-mail: [email protected] www.nibe.com
Accessories FIGHTER 1330