Used-List - Flexo

Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 1 von 6
You will find a used-list in PDF format at: http://www.flexo-technic.de/pdf/used-list.pdf
Year
and
Location
List 1082016
Code P 1275
71 Made in Germany
132 x 203 cm - Du Pont Cyrel* Processor
incl. punch and 2 pin bars
Touch screen
Solvent heater
Barrel Kit on request
Constantly serviced by a Du Pont technician!
2006
Germany
132 x 203 cm - Du Pont Cyrel*
Dryer with Light-Finisher
Touch screen
Constantly serviced by a Du Pont technician
2012
Germany
Code D 1342
72 Made in Germany
Code D 1339
NEW in 2014! Demo unit
132 x 203 cm Dryer - REVLIS and UV-A
Dryer with 6 drawers.
51 Made for FlexoTechnic
2014
FTH
Optional with New Light-Finisher
or USED Code LF 1431
Code 1343
132 x 203 cm - Du Pont Cyrel*
Dryer
5 drying drawers with separate timers
Constantly serviced by Du Pont technician
73 Made in Germany
2005
FTH
Optional with USED Code LF 1431
Code E 1173
132 x 203 cm Exposure BASF F V
with new vacuum pump and vacuum
stripes on the glass plate
+ new set of tubes
63 Made in France
Seite 1 von 6
12/2002
FTH
The BASF F V exposure is a high quality, doubleside exposure
unit. The BASF F V exposure is capable of main exposure and back
exposing high quality photopolymer plates up to a maximum size
of 52 x 80 inches (132 cm x 203 cm)
WITHOUT MOVING THE PLATE from the exposure bed.
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 2 von 6
Code 1276
65 Made in Germany
92 x 120 cm - BASF Combi F III Processor
with ECDLF
incl. punch and 2 pin bars
Touch screen
Solvent heater
Barrel Kit on request
2001
FTH
SOLD
TO
IRAN
46 x 62 cm - BASF Combi F I Processor
with ECDLF
incl. punch and 2 pin bars
Touch screen
Solvent heater
Barrel Kit on request
1997
FTH
SOLD
TO
Scandinavia
Code 1273
66 Made in Italy
Code EDLF 1155
NEW in 2014! Demo unit
92 x 120 cm Exposure,
Dryer and Light-Finisher - REVLIS
32 Made for FlexoTechnic
Automatic Lid opening
80W tubes
3 dryer drawers
optional active cooling
optional graphic touch screen
2013
FTH
Code EDLF 1154
13 Made in Italy
76 x 101 cm Exposure,
Dryer and Light-Finisher
Solution Graphiques
Was in operation until June 2013
In best working order.
60W tubes
3 dryer drawers
2003
FTH
Code D 1339
NEW in 2014! Demo unit
132 x 203 cm Dryer - REVLIS and UV-A
Dryer with 6 drawers.
51 Made for FlexoTechnic
Optional with New Light-Finisher or Code LF 1431
Code LF 1431
132 x 203 cm Light-Finisher for flexo printing plates
MEKROM Concept 501 LF
67 Made in Italy
Seite 2 von 6
45 UVC 75 W tubes.
46 UV A 80W 10/R tubes.
Automatic defective lamp detection.
9 memory channels.
Electronic ballasts for UVC and UVA tubes.
Cooling system. 2 Exhaust blowers.
2014
FTH
2008
FTH
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 3 von 6
Code E 1160
76 x 101 cm - Exposure for flexo plate
processing
BASF F III
In very good condition. Ready to work for many more
years.
80W tubes. UVA output 12,8 Nm
1990
FTH
45 Made in France
Code 2026
Du Pont Cyrel* Microflex 1320 with
proofing. For sleeve and cylinder.
This high performance mounter can mount all photopolymer
plates onto cylinders or sleeves up to a maximum size of 52
inches wide (1320mm) and repeats up to 39.9 inches
(1016mm). The unit features computer-controlled cameras
with a magnification of 40X
70 Made in France
1997
FTH
SOLD
TO
MEXICO
In very good condition.
Code E 1168
90 x 120 cm - CTF FlexoLaser - Medio
59 Made in Germany
Standard resolution: 2540 dpi
200 lpi 80 lcm
Speed: 2 qm/hour (OPTICS 15)
NEW PRICE is: 117.000 Euro for the laser
SOFTWARE Xante Symphonie Flexoavailable for extra 5.000 Euro
2008
Germany
SOLD TO
INDIA
Code E 1169
106,7 x 152,4 cm - HELL CtP Flexo Laser,
Hell Gravure F 2000
60 Made in Germany
Code LF 1430
28 Made in France
fully functional CtP Flexo Laser for any kind of digital flexo plates
(LAMS)
2002
build in 2002 but fully refurbished and technically updated in
Germany
2004
reliable fibre laser system with 8 single laser units (only 6 in
operation)
6 laser units with only 3000 working hours, 2 units with only
1500 working hours 2540 dpi
92 x 120 cm Light-Finisher for flexo printing plates
Du Pont Cyrel* 1002 LF
The unit is designed with an exposure bank fitted with 27 UV
A exposure lamps, a control panel, one drawer, fitted with an
electronically timer.
SOLD TO
BULGARIA
1997
FTH
Cutter 45° + 90°
ON REQUEST
Flexo Plate Cutter 45° + 90°
in different sizes available:
98 cm
118 cm
157 cm
2015
FTH
MORE THEN 100
CUTTERS WERE
SOLD WORLD
WIDE
218 cm
Made in U.K.
Code 12149
Seite 3 von 6
Solvent recovery with or without
vacuum - IST 202 Eco, stainless steel
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
64 Made in Italy
The working cycle is completely automatic and driven by a
digital microprocessor, which enables several operational
functions. This model ECO 202 is not standard, with
separate heating tank for the oil and oil circulation pump.
It has also a bottom discharging valve and not a lateral
one, so a better drainage of the residuals. At last but not
least this unit is equipped with the last version of our plc,
with touch screen panel and display.
Seite 4 von 6
2009
FTH
SOLD to
JORDANIA
Code 12204
POLYMOUNT PLATE CLEANER 800
Plate Cleaner after printing
There is one aspect of plate cleaning that remains somewhat
inconsistent that has a tremendous effect on plate life and
performance, and that is a consistent deep cleaning into the
screen areas of the plate.
48 Made in the Netherlands
2008
FTH
SOLD to
GEORGIA
800 Plate Cleaner (800 x 1200mm),
OTHER SIZES AVAILABLE. Please ask.
LETTERPRESS
Code 1175
90 x 120 cm HOUTSTRA POLYMERO HP 400 exposure
Hydraulik lid opening
N/A
FTH
69 Made in NL
NEW HIGH QUALITY
EQUIPMENT ON REQUEST
NEW!
66 x 86 cm - REVLIS Pro II
Flexo plate processor Code P 1272
SINGLE processor incl. prewash for digital plates
incl. punch and 3 pin bars
Touch screen
Solvent heater
or alternatively with EDLF or 4UP EDLF 2015
on order
47 Made for FlexoTechnic
OR
Code ECDLF 1155
separate EDLF 66 x 86 cm
Code 4 UP ECDLF can be
placed under the predryer
NEW!
Code P 1267
92 x 120 cm - REVLIS Pro II
Flexo plate processor SINGLE processor incl. prewash for digital plates
incl. punch and 3 pin bars
Touch screen Solvent heater
or alternatively with ECDLF or 4UP EDLF 2015
on order
46 Made for FlexoTechnic
OR Code 4 UP ECDLF
Code E 1155
separate ECDLF 92 x 120 cm
Seite 4 von 6
can be
placed under the
pre-dryer
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 5 von 6
Code P 1275
NEW!
132 x 203 cm - REVLIS Pro IV
Flexo plate processor SINGLE processor incl. prewash for digital plates
incl. punch and 3 pin bars
Touch screen Solvent heater
2015
on order
74 Made for FlexoTechnic
Code DLF 1339
NEW!
132 x 203 cm - REVLIS Dryer and
Light-Finisher/Post-Exposure UV-C and UV-A
2015
on order
Dryer with 6 drawers.
51 Made for FlexoTechnic
EACH unit is also available as single unit.
NEW!
Code D 1166
55 Made for FlexoTechnic
132 x 203 cm - REVLIS Top Lift Exposure
- UV-A and UV-C
Pre and Main exposure without turning the plate.
YERKELESS up and down movement of the TOP LIFT
THIS IS UNIQUE: You position the control bord
were and when you want it.
THIS IS UNIQUE, too:
For easy maintenance the glass plate lifts up with the TOP LIFT
2015
on order
OPTION: One side exposure with cooled bed. Code 1170
This information was sent to [email protected].
If you no longer wish to receive these emails, please reply to this message with
"unsubscribe" in the subject line or simply click on the following link:
Unsubscribe: Your email address
Come and visit us in our show room and ware house!
Seite 5 von 6
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 6 von 6
The shown prices are net prices. You need to add your commission,
crating, transportation and installation costs.
ONLY the prices shown in our quotation or pro-forma invoice are binding
and valid.
ALL USED machinery is offered on an as is, ex site basis unless
otherwise stated in writing, subject to prior sale and/or availability.
All used machines are offered subject to remaining unsold.
Please note our payment terms for USED machine
100% deposit with official order
On NEW articles your warranty is 12 month on all parts besides
brushes, tubes and vacuum foil.
The parts will be shipped on your account.
All specifications are correct to the best of our knowledge but it is the
customer's responsibility to ensure him self that the equipment meets
his requirements.
Please note our payment terms for NEW machinery
30% deposit with official order
70% before crating resp. when ready for shipment.
If this is of interest for you, please come back with any further question
you might have
Flexo-Technic Handels GmbH
Mr. Reiner Roosen
Von-Eiff-Strasse 23
63456 Hanau
www.flexo-technic.de
www.pile-turner.biz
Phone 0049-6181-6709055
Fax 0049-6181-6709056
http://www.flexo-technic.de/contact.html
Seite 6 von 6
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 1 von 6
You will find a used-list in PDF format at: http://www.flexo-technic.de/pdf/used-list.pdf
Year
and
Location
List 1082016
Code P 1275
71 Made in Germany
132 x 203 cm - Du Pont Cyrel* Processor
incl. punch and 2 pin bars
Touch screen
Solvent heater
Barrel Kit on request
Constantly serviced by a Du Pont technician!
2006
Germany
132 x 203 cm - Du Pont Cyrel*
Dryer with Light-Finisher
Touch screen
Constantly serviced by a Du Pont technician
2012
Germany
Code D 1342
72 Made in Germany
Code D 1339
NEW in 2014! Demo unit
132 x 203 cm Dryer - REVLIS and UV-A
Dryer with 6 drawers.
51 Made for FlexoTechnic
2014
FTH
Optional with New Light-Finisher
or USED Code LF 1431
Code 1343
132 x 203 cm - Du Pont Cyrel*
Dryer
5 drying drawers with separate timers
Constantly serviced by Du Pont technician
73 Made in Germany
2005
FTH
Optional with USED Code LF 1431
Code E 1173
132 x 203 cm Exposure BASF F V
with new vacuum pump and vacuum
stripes on the glass plate
+ new set of tubes
63 Made in France
Seite 1 von 6
12/2002
FTH
The BASF F V exposure is a high quality, doubleside exposure
unit. The BASF F V exposure is capable of main exposure and back
exposing high quality photopolymer plates up to a maximum size
of 52 x 80 inches (132 cm x 203 cm)
WITHOUT MOVING THE PLATE from the exposure bed.
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 2 von 6
Code 1276
65 Made in Germany
92 x 120 cm - BASF Combi F III Processor
with ECDLF
incl. punch and 2 pin bars
Touch screen
Solvent heater
Barrel Kit on request
2001
FTH
SOLD
TO
IRAN
46 x 62 cm - BASF Combi F I Processor
with ECDLF
incl. punch and 2 pin bars
Touch screen
Solvent heater
Barrel Kit on request
1997
FTH
SOLD
TO
Scandinavia
Code 1273
66 Made in Italy
Code EDLF 1155
NEW in 2014! Demo unit
92 x 120 cm Exposure,
Dryer and Light-Finisher - REVLIS
32 Made for FlexoTechnic
Automatic Lid opening
80W tubes
3 dryer drawers
optional active cooling
optional graphic touch screen
2013
FTH
Code EDLF 1154
13 Made in Italy
76 x 101 cm Exposure,
Dryer and Light-Finisher
Solution Graphiques
Was in operation until June 2013
In best working order.
60W tubes
3 dryer drawers
2003
FTH
Code D 1339
NEW in 2014! Demo unit
132 x 203 cm Dryer - REVLIS and UV-A
Dryer with 6 drawers.
51 Made for FlexoTechnic
Optional with New Light-Finisher or Code LF 1431
Code LF 1431
132 x 203 cm Light-Finisher for flexo printing plates
MEKROM Concept 501 LF
67 Made in Italy
Seite 2 von 6
45 UVC 75 W tubes.
46 UV A 80W 10/R tubes.
Automatic defective lamp detection.
9 memory channels.
Electronic ballasts for UVC and UVA tubes.
Cooling system. 2 Exhaust blowers.
2014
FTH
2008
FTH
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 3 von 6
Code E 1160
76 x 101 cm - Exposure for flexo plate
processing
BASF F III
In very good condition. Ready to work for many more
years.
80W tubes. UVA output 12,8 Nm
1990
FTH
45 Made in France
Code 2026
Du Pont Cyrel* Microflex 1320 with
proofing. For sleeve and cylinder.
This high performance mounter can mount all photopolymer
plates onto cylinders or sleeves up to a maximum size of 52
inches wide (1320mm) and repeats up to 39.9 inches
(1016mm). The unit features computer-controlled cameras
with a magnification of 40X
70 Made in France
1997
FTH
SOLD
TO
MEXICO
In very good condition.
Code E 1168
90 x 120 cm - CTF FlexoLaser - Medio
59 Made in Germany
Standard resolution: 2540 dpi
200 lpi 80 lcm
Speed: 2 qm/hour (OPTICS 15)
NEW PRICE is: 117.000 Euro for the laser
SOFTWARE Xante Symphonie Flexoavailable for extra 5.000 Euro
2008
Germany
SOLD TO
INDIA
Code E 1169
106,7 x 152,4 cm - HELL CtP Flexo Laser,
Hell Gravure F 2000
60 Made in Germany
Code LF 1430
28 Made in France
fully functional CtP Flexo Laser for any kind of digital flexo plates
(LAMS)
2002
build in 2002 but fully refurbished and technically updated in
Germany
2004
reliable fibre laser system with 8 single laser units (only 6 in
operation)
6 laser units with only 3000 working hours, 2 units with only
1500 working hours 2540 dpi
92 x 120 cm Light-Finisher for flexo printing plates
Du Pont Cyrel* 1002 LF
The unit is designed with an exposure bank fitted with 27 UV
A exposure lamps, a control panel, one drawer, fitted with an
electronically timer.
SOLD TO
BULGARIA
1997
FTH
Cutter 45° + 90°
ON REQUEST
Flexo Plate Cutter 45° + 90°
in different sizes available:
98 cm
118 cm
157 cm
2015
FTH
MORE THEN 100
CUTTERS WERE
SOLD WORLD
WIDE
218 cm
Made in U.K.
Code 12149
Seite 3 von 6
Solvent recovery with or without
vacuum - IST 202 Eco, stainless steel
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
64 Made in Italy
The working cycle is completely automatic and driven by a
digital microprocessor, which enables several operational
functions. This model ECO 202 is not standard, with
separate heating tank for the oil and oil circulation pump.
It has also a bottom discharging valve and not a lateral
one, so a better drainage of the residuals. At last but not
least this unit is equipped with the last version of our plc,
with touch screen panel and display.
Seite 4 von 6
2009
FTH
SOLD to
JORDANIA
Code 12204
POLYMOUNT PLATE CLEANER 800
Plate Cleaner after printing
There is one aspect of plate cleaning that remains somewhat
inconsistent that has a tremendous effect on plate life and
performance, and that is a consistent deep cleaning into the
screen areas of the plate.
48 Made in the Netherlands
2008
FTH
SOLD to
GEORGIA
800 Plate Cleaner (800 x 1200mm),
OTHER SIZES AVAILABLE. Please ask.
LETTERPRESS
Code 1175
90 x 120 cm HOUTSTRA POLYMERO HP 400 exposure
Hydraulik lid opening
N/A
FTH
69 Made in NL
NEW HIGH QUALITY
EQUIPMENT ON REQUEST
NEW!
66 x 86 cm - REVLIS Pro II
Flexo plate processor Code P 1272
SINGLE processor incl. prewash for digital plates
incl. punch and 3 pin bars
Touch screen
Solvent heater
or alternatively with EDLF or 4UP EDLF 2015
on order
47 Made for FlexoTechnic
OR
Code ECDLF 1155
separate EDLF 66 x 86 cm
Code 4 UP ECDLF can be
placed under the predryer
NEW!
Code P 1267
92 x 120 cm - REVLIS Pro II
Flexo plate processor SINGLE processor incl. prewash for digital plates
incl. punch and 3 pin bars
Touch screen Solvent heater
or alternatively with ECDLF or 4UP EDLF 2015
on order
46 Made for FlexoTechnic
OR Code 4 UP ECDLF
Code E 1155
separate ECDLF 92 x 120 cm
Seite 4 von 6
can be
placed under the
pre-dryer
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 5 von 6
Code P 1275
NEW!
132 x 203 cm - REVLIS Pro IV
Flexo plate processor SINGLE processor incl. prewash for digital plates
incl. punch and 3 pin bars
Touch screen Solvent heater
2015
on order
74 Made for FlexoTechnic
Code DLF 1339
NEW!
132 x 203 cm - REVLIS Dryer and
Light-Finisher/Post-Exposure UV-C and UV-A
2015
on order
Dryer with 6 drawers.
51 Made for FlexoTechnic
EACH unit is also available as single unit.
NEW!
Code D 1166
55 Made for FlexoTechnic
132 x 203 cm - REVLIS Top Lift Exposure
- UV-A and UV-C
Pre and Main exposure without turning the plate.
YERKELESS up and down movement of the TOP LIFT
THIS IS UNIQUE: You position the control bord
were and when you want it.
THIS IS UNIQUE, too:
For easy maintenance the glass plate lifts up with the TOP LIFT
2015
on order
OPTION: One side exposure with cooled bed. Code 1170
This information was sent to [email protected].
If you no longer wish to receive these emails, please reply to this message with
"unsubscribe" in the subject line or simply click on the following link:
Unsubscribe: Your email address
Come and visit us in our show room and ware house!
Seite 5 von 6
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 6 von 6
The shown prices are net prices. You need to add your commission,
crating, transportation and installation costs.
ONLY the prices shown in our quotation or pro-forma invoice are binding
and valid.
ALL USED machinery is offered on an as is, ex site basis unless
otherwise stated in writing, subject to prior sale and/or availability.
All used machines are offered subject to remaining unsold.
Please note our payment terms for USED machine
100% deposit with official order
On NEW articles your warranty is 12 month on all parts besides
brushes, tubes and vacuum foil.
The parts will be shipped on your account.
All specifications are correct to the best of our knowledge but it is the
customer's responsibility to ensure him self that the equipment meets
his requirements.
Please note our payment terms for NEW machinery
30% deposit with official order
70% before crating resp. when ready for shipment.
If this is of interest for you, please come back with any further question
you might have
Flexo-Technic Handels GmbH
Mr. Reiner Roosen
Von-Eiff-Strasse 23
63456 Hanau
www.flexo-technic.de
www.pile-turner.biz
Phone 0049-6181-6709055
Fax 0049-6181-6709056
http://www.flexo-technic.de/contact.html
Seite 6 von 6
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 1 von 6
You will find a used-list in PDF format at: http://www.flexo-technic.de/pdf/used-list.pdf
Year
and
Location
List 1082016
Code P 1275
71 Made in Germany
132 x 203 cm - Du Pont Cyrel* Processor
incl. punch and 2 pin bars
Touch screen
Solvent heater
Barrel Kit on request
Constantly serviced by a Du Pont technician!
2006
Germany
132 x 203 cm - Du Pont Cyrel*
Dryer with Light-Finisher
Touch screen
Constantly serviced by a Du Pont technician
2012
Germany
Code D 1342
72 Made in Germany
Code D 1339
NEW in 2014! Demo unit
132 x 203 cm Dryer - REVLIS and UV-A
Dryer with 6 drawers.
51 Made for FlexoTechnic
2014
FTH
Optional with New Light-Finisher
or USED Code LF 1431
Code 1343
132 x 203 cm - Du Pont Cyrel*
Dryer
5 drying drawers with separate timers
Constantly serviced by Du Pont technician
73 Made in Germany
2005
FTH
Optional with USED Code LF 1431
Code E 1173
132 x 203 cm Exposure BASF F V
with new vacuum pump and vacuum
stripes on the glass plate
+ new set of tubes
63 Made in France
Seite 1 von 6
12/2002
FTH
The BASF F V exposure is a high quality, doubleside exposure
unit. The BASF F V exposure is capable of main exposure and back
exposing high quality photopolymer plates up to a maximum size
of 52 x 80 inches (132 cm x 203 cm)
WITHOUT MOVING THE PLATE from the exposure bed.
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 2 von 6
Code 1276
65 Made in Germany
92 x 120 cm - BASF Combi F III Processor
with ECDLF
incl. punch and 2 pin bars
Touch screen
Solvent heater
Barrel Kit on request
2001
FTH
SOLD
TO
IRAN
46 x 62 cm - BASF Combi F I Processor
with ECDLF
incl. punch and 2 pin bars
Touch screen
Solvent heater
Barrel Kit on request
1997
FTH
SOLD
TO
Scandinavia
Code 1273
66 Made in Italy
Code EDLF 1155
NEW in 2014! Demo unit
92 x 120 cm Exposure,
Dryer and Light-Finisher - REVLIS
32 Made for FlexoTechnic
Automatic Lid opening
80W tubes
3 dryer drawers
optional active cooling
optional graphic touch screen
2013
FTH
Code EDLF 1154
13 Made in Italy
76 x 101 cm Exposure,
Dryer and Light-Finisher
Solution Graphiques
Was in operation until June 2013
In best working order.
60W tubes
3 dryer drawers
2003
FTH
Code D 1339
NEW in 2014! Demo unit
132 x 203 cm Dryer - REVLIS and UV-A
Dryer with 6 drawers.
51 Made for FlexoTechnic
Optional with New Light-Finisher or Code LF 1431
Code LF 1431
132 x 203 cm Light-Finisher for flexo printing plates
MEKROM Concept 501 LF
67 Made in Italy
Seite 2 von 6
45 UVC 75 W tubes.
46 UV A 80W 10/R tubes.
Automatic defective lamp detection.
9 memory channels.
Electronic ballasts for UVC and UVA tubes.
Cooling system. 2 Exhaust blowers.
2014
FTH
2008
FTH
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 3 von 6
Code E 1160
76 x 101 cm - Exposure for flexo plate
processing
BASF F III
In very good condition. Ready to work for many more
years.
80W tubes. UVA output 12,8 Nm
1990
FTH
45 Made in France
Code 2026
Du Pont Cyrel* Microflex 1320 with
proofing. For sleeve and cylinder.
This high performance mounter can mount all photopolymer
plates onto cylinders or sleeves up to a maximum size of 52
inches wide (1320mm) and repeats up to 39.9 inches
(1016mm). The unit features computer-controlled cameras
with a magnification of 40X
70 Made in France
1997
FTH
SOLD
TO
MEXICO
In very good condition.
Code E 1168
90 x 120 cm - CTF FlexoLaser - Medio
59 Made in Germany
Standard resolution: 2540 dpi
200 lpi 80 lcm
Speed: 2 qm/hour (OPTICS 15)
NEW PRICE is: 117.000 Euro for the laser
SOFTWARE Xante Symphonie Flexoavailable for extra 5.000 Euro
2008
Germany
SOLD TO
INDIA
Code E 1169
106,7 x 152,4 cm - HELL CtP Flexo Laser,
Hell Gravure F 2000
60 Made in Germany
Code LF 1430
28 Made in France
fully functional CtP Flexo Laser for any kind of digital flexo plates
(LAMS)
2002
build in 2002 but fully refurbished and technically updated in
Germany
2004
reliable fibre laser system with 8 single laser units (only 6 in
operation)
6 laser units with only 3000 working hours, 2 units with only
1500 working hours 2540 dpi
92 x 120 cm Light-Finisher for flexo printing plates
Du Pont Cyrel* 1002 LF
The unit is designed with an exposure bank fitted with 27 UV
A exposure lamps, a control panel, one drawer, fitted with an
electronically timer.
SOLD TO
BULGARIA
1997
FTH
Cutter 45° + 90°
ON REQUEST
Flexo Plate Cutter 45° + 90°
in different sizes available:
98 cm
118 cm
157 cm
2015
FTH
MORE THEN 100
CUTTERS WERE
SOLD WORLD
WIDE
218 cm
Made in U.K.
Code 12149
Seite 3 von 6
Solvent recovery with or without
vacuum - IST 202 Eco, stainless steel
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
64 Made in Italy
The working cycle is completely automatic and driven by a
digital microprocessor, which enables several operational
functions. This model ECO 202 is not standard, with
separate heating tank for the oil and oil circulation pump.
It has also a bottom discharging valve and not a lateral
one, so a better drainage of the residuals. At last but not
least this unit is equipped with the last version of our plc,
with touch screen panel and display.
Seite 4 von 6
2009
FTH
SOLD to
JORDANIA
Code 12204
POLYMOUNT PLATE CLEANER 800
Plate Cleaner after printing
There is one aspect of plate cleaning that remains somewhat
inconsistent that has a tremendous effect on plate life and
performance, and that is a consistent deep cleaning into the
screen areas of the plate.
48 Made in the Netherlands
2008
FTH
SOLD to
GEORGIA
800 Plate Cleaner (800 x 1200mm),
OTHER SIZES AVAILABLE. Please ask.
LETTERPRESS
Code 1175
90 x 120 cm HOUTSTRA POLYMERO HP 400 exposure
Hydraulik lid opening
N/A
FTH
69 Made in NL
NEW HIGH QUALITY
EQUIPMENT ON REQUEST
NEW!
66 x 86 cm - REVLIS Pro II
Flexo plate processor Code P 1272
SINGLE processor incl. prewash for digital plates
incl. punch and 3 pin bars
Touch screen
Solvent heater
or alternatively with EDLF or 4UP EDLF 2015
on order
47 Made for FlexoTechnic
OR
Code ECDLF 1155
separate EDLF 66 x 86 cm
Code 4 UP ECDLF can be
placed under the predryer
NEW!
Code P 1267
92 x 120 cm - REVLIS Pro II
Flexo plate processor SINGLE processor incl. prewash for digital plates
incl. punch and 3 pin bars
Touch screen Solvent heater
or alternatively with ECDLF or 4UP EDLF 2015
on order
46 Made for FlexoTechnic
OR Code 4 UP ECDLF
Code E 1155
separate ECDLF 92 x 120 cm
Seite 4 von 6
can be
placed under the
pre-dryer
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 5 von 6
Code P 1275
NEW!
132 x 203 cm - REVLIS Pro IV
Flexo plate processor SINGLE processor incl. prewash for digital plates
incl. punch and 3 pin bars
Touch screen Solvent heater
2015
on order
74 Made for FlexoTechnic
Code DLF 1339
NEW!
132 x 203 cm - REVLIS Dryer and
Light-Finisher/Post-Exposure UV-C and UV-A
2015
on order
Dryer with 6 drawers.
51 Made for FlexoTechnic
EACH unit is also available as single unit.
NEW!
Code D 1166
55 Made for FlexoTechnic
132 x 203 cm - REVLIS Top Lift Exposure
- UV-A and UV-C
Pre and Main exposure without turning the plate.
YERKELESS up and down movement of the TOP LIFT
THIS IS UNIQUE: You position the control bord
were and when you want it.
THIS IS UNIQUE, too:
For easy maintenance the glass plate lifts up with the TOP LIFT
2015
on order
OPTION: One side exposure with cooled bed. Code 1170
This information was sent to [email protected].
If you no longer wish to receive these emails, please reply to this message with
"unsubscribe" in the subject line or simply click on the following link:
Unsubscribe: Your email address
Come and visit us in our show room and ware house!
Seite 5 von 6
28.07.2016
Used Flexo Plate Processing Equipment - LIST 1-08-2016 {E-Mail: 497}
Seite 6 von 6
The shown prices are net prices. You need to add your commission,
crating, transportation and installation costs.
ONLY the prices shown in our quotation or pro-forma invoice are binding
and valid.
ALL USED machinery is offered on an as is, ex site basis unless
otherwise stated in writing, subject to prior sale and/or availability.
All used machines are offered subject to remaining unsold.
Please note our payment terms for USED machine
100% deposit with official order
On NEW articles your warranty is 12 month on all parts besides
brushes, tubes and vacuum foil.
The parts will be shipped on your account.
All specifications are correct to the best of our knowledge but it is the
customer's responsibility to ensure him self that the equipment meets
his requirements.
Please note our payment terms for NEW machinery
30% deposit with official order
70% before crating resp. when ready for shipment.
If this is of interest for you, please come back with any further question
you might have
Flexo-Technic Handels GmbH
Mr. Reiner Roosen
Von-Eiff-Strasse 23
63456 Hanau
www.flexo-technic.de
www.pile-turner.biz
Phone 0049-6181-6709055
Fax 0049-6181-6709056
http://www.flexo-technic.de/contact.html
Seite 6 von 6
28.07.2016

Download Report